All of lore.kernel.org
 help / color / mirror / Atom feed
From: Damien Le Moal <dlemoal@kernel.org>
To: linux-ide@vger.kernel.org
Cc: linux-scsi@vger.kernel.org,
	"Martin K . Petersen" <martin.petersen@oracle.com>,
	John Garry <john.g.garry@oracle.com>,
	Rodrigo Vivi <rodrigo.vivi@intel.com>,
	Paul Ausbeck <paula@soe.ucsc.edu>,
	Kai-Heng Feng <kai.heng.feng@canonical.com>,
	Joe Breuer <linux-kernel@jmbreuer.net>,
	Geert Uytterhoeven <geert@linux-m68k.org>,
	Chia-Lin Kao <acelan.kao@canonical.com>
Subject: [PATCH v6 10/23] ata: libata-core: Fix compilation warning in ata_dev_config_ncq()
Date: Sat, 23 Sep 2023 09:29:19 +0900	[thread overview]
Message-ID: <20230923002932.1082348-11-dlemoal@kernel.org> (raw)
In-Reply-To: <20230923002932.1082348-1-dlemoal@kernel.org>

The 24 bytes length allocated to the ncq_desc string in
ata_dev_config_lba() for ata_dev_config_ncq() to use is too short,
causing the following gcc compilation warnings when compiling with W=1:

drivers/ata/libata-core.c: In function ‘ata_dev_configure’:
drivers/ata/libata-core.c:2378:56: warning: ‘%d’ directive output may be truncated writing between 1 and 2 bytes into a region of size between 1 and 11 [-Wformat-truncation=]
 2378 |                 snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
      |                                                        ^~
In function ‘ata_dev_config_ncq’,
    inlined from ‘ata_dev_config_lba’ at drivers/ata/libata-core.c:2649:8,
    inlined from ‘ata_dev_configure’ at drivers/ata/libata-core.c:2952:9:
drivers/ata/libata-core.c:2378:41: note: directive argument in the range [1, 32]
 2378 |                 snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
      |                                         ^~~~~~~~~~~~~~~~~~~~~
drivers/ata/libata-core.c:2378:17: note: ‘snprintf’ output between 16 and 31 bytes into a destination of size 24
 2378 |                 snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 2379 |                         ddepth, aa_desc);
      |                         ~~~~~~~~~~~~~~~~

Avoid these warnings and the potential truncation by changing the size
of the ncq_desc string to 32 characters.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
---
 drivers/ata/libata-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 261445c1851b..d8cc1e27a125 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2619,7 +2619,7 @@ static int ata_dev_config_lba(struct ata_device *dev)
 {
 	const u16 *id = dev->id;
 	const char *lba_desc;
-	char ncq_desc[24];
+	char ncq_desc[32];
 	int ret;
 
 	dev->flags |= ATA_DFLAG_LBA;
-- 
2.41.0


  parent reply	other threads:[~2023-09-23  0:29 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-09-23  0:29 [PATCH v6 00/23] Fix libata suspend/resume handling and code cleanup Damien Le Moal
2023-09-23  0:29 ` [PATCH v6 01/23] ata: libata-core: Fix ata_port_request_pm() locking Damien Le Moal
2023-09-26 17:18   ` Bart Van Assche
2023-09-23  0:29 ` [PATCH v6 02/23] ata: libata-core: Fix port and device removal Damien Le Moal
2023-09-26 17:28   ` Bart Van Assche
2023-09-23  0:29 ` [PATCH v6 03/23] ata: libata-scsi: link ata port and scsi device Damien Le Moal
2023-09-23  0:29 ` [PATCH v6 04/23] scsi: sd: Differentiate system and runtime start/stop management Damien Le Moal
2023-09-26 18:07   ` Bart Van Assche
2023-09-23  0:29 ` [PATCH v6 05/23] ata: libata-scsi: Disable scsi device manage_system_start_stop Damien Le Moal
2023-09-25 14:27   ` Phillip Susi
2023-09-26  6:19     ` Damien Le Moal
2023-09-26  6:34       ` Damien Le Moal
2023-09-26 15:25       ` Phillip Susi
2023-09-23  0:29 ` [PATCH v6 06/23] scsi: Do not attempt to rescan suspended devices Damien Le Moal
2023-09-26 18:10   ` Bart Van Assche
2023-09-23  0:29 ` [PATCH v6 07/23] ata: libata-scsi: Fix delayed scsi_rescan_device() execution Damien Le Moal
2023-09-23  0:29 ` [PATCH v6 08/23] ata: libata-core: Do not register PM operations for SAS ports Damien Le Moal
2023-09-23  0:29 ` [PATCH v6 09/23] scsi: sd: Do not issue commands to suspended disks on shutdown Damien Le Moal
2023-09-25 20:22   ` Bart Van Assche
2023-09-26  6:00     ` Damien Le Moal
2023-09-26 14:51       ` Bart Van Assche
2023-09-26 23:30         ` Bart Van Assche
2023-09-23  0:29 ` Damien Le Moal [this message]
2023-09-23  0:29 ` [PATCH v6 11/23] ata: libata-eh: Fix compilation warning in ata_eh_link_report() Damien Le Moal
2023-09-23  0:29 ` [PATCH v6 12/23] scsi: Remove scsi device no_start_on_resume flag Damien Le Moal
2023-09-26 20:42   ` Bart Van Assche
2023-09-23  0:29 ` [PATCH v6 13/23] ata: libata-scsi: Cleanup ata_scsi_start_stop_xlat() Damien Le Moal
2023-09-23  0:29 ` [PATCH v6 14/23] ata: libata-core: Synchronize ata_port_detach() with hotplug Damien Le Moal
2023-09-23  0:29 ` [PATCH v6 15/23] ata: libata-core: Detach a port devices on shutdown Damien Le Moal
2023-09-23  0:29 ` [PATCH v6 16/23] ata: libata-core: Remove ata_port_suspend_async() Damien Le Moal
2023-09-23  0:29 ` [PATCH v6 17/23] ata: libata-core: Remove ata_port_resume_async() Damien Le Moal
2023-09-23  0:29 ` [PATCH v6 18/23] ata: libata-core: Do not poweroff runtime suspended ports Damien Le Moal
2023-09-23  0:29 ` [PATCH v6 19/23] ata: libata-core: Do not resume " Damien Le Moal
2023-09-25 17:26   ` Phillip Susi
2023-09-26  6:27     ` Damien Le Moal
2023-09-26 15:01       ` Phillip Susi
2023-09-23  0:29 ` [PATCH v6 20/23] ata: libata-sata: Improve ata_sas_slave_configure() Damien Le Moal
2023-09-23  0:29 ` [PATCH v6 21/23] ata: libata-eh: Improve reset error messages Damien Le Moal
2023-09-23  0:29 ` [PATCH v6 22/23] ata: libata-eh: Reduce "disable device" message verbosity Damien Le Moal
2023-09-23  0:29 ` [PATCH v6 23/23] ata: libata: Cleanup inline DMA helper functions Damien Le Moal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230923002932.1082348-11-dlemoal@kernel.org \
    --to=dlemoal@kernel.org \
    --cc=acelan.kao@canonical.com \
    --cc=geert@linux-m68k.org \
    --cc=john.g.garry@oracle.com \
    --cc=kai.heng.feng@canonical.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@jmbreuer.net \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=paula@soe.ucsc.edu \
    --cc=rodrigo.vivi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.