All of lore.kernel.org
 help / color / mirror / Atom feed
From: Fabio Estevam <festevam@gmail.com>
To: shawnguo@kernel.org
Cc: Frank.Li@nxp.com, linux-arm-kernel@lists.infradead.org,
	Fabio Estevam <festevam@denx.de>
Subject: [PATCH] arm64: dts: imx93: Fix the dmas entries order
Date: Tue, 26 Sep 2023 11:18:54 -0300	[thread overview]
Message-ID: <20230926141854.388953-1-festevam@gmail.com> (raw)

From: Fabio Estevam <festevam@denx.de>

Per fsl-lpuart.yaml, the dmas and dma-names entries should be
'rx' followed by 'tx'.

Change the order to fix the following schema warning:

imx93-11x11-evk.dtb: serial@44380000: dma-names:0: 'rx' was expected
	from schema $id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml#
imx93-11x11-evk.dtb: serial@44380000: dma-names:1: 'tx' was expected
	from schema $id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
---
 arch/arm64/boot/dts/freescale/imx93.dtsi | 32 ++++++++++++------------
 1 file changed, 16 insertions(+), 16 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index f20dd18e0b65..d6f6aeb7da74 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -336,8 +336,8 @@ lpuart1: serial@44380000 {
 				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART1_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma1 16 0 0>, <&edma1 17 0 1>;
-				dma-names = "tx", "rx";
+				dmas = <&edma1 17 0 1>, <&edma1 16 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -347,8 +347,8 @@ lpuart2: serial@44390000 {
 				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART2_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma1 18 0 0>, <&edma1 19 0 1>;
-				dma-names = "tx", "rx";
+				dmas = <&edma1 19 0 1>, <&edma1 18 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -669,8 +669,8 @@ lpuart3: serial@42570000 {
 				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART3_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma2 17 0 0>, <&edma2 18 0 1>;
-				dma-names = "tx", "rx";
+				dmas = <&edma2 18 0 1>, <&edma2 17 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -680,8 +680,8 @@ lpuart4: serial@42580000 {
 				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART4_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma2 19 0 0>, <&edma2 20 0 1>;
-				dma-names = "tx", "rx";
+				dmas = <&edma2 20 0 1>, <&edma2 19 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -691,8 +691,8 @@ lpuart5: serial@42590000 {
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART5_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma2 21 0 0>, <&edma2 22 0 1>;
-				dma-names = "tx", "rx";
+				dmas = <&edma2 22 0 1>, <&edma2 21 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -702,8 +702,8 @@ lpuart6: serial@425a0000 {
 				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART6_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma2 23 0 0>, <&edma2 24 0 1>;
-				dma-names = "tx", "rx";
+				dmas = <&edma2 24 0 1>, <&edma2 23 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -742,8 +742,8 @@ lpuart7: serial@42690000 {
 				interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART7_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma2 87 0 0>, <&edma2 88 0 1>;
-				dma-names = "tx", "rx";
+				dmas = <&edma2 88 0 1>, <&edma2 87 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -753,8 +753,8 @@ lpuart8: serial@426a0000 {
 				interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX93_CLK_LPUART8_GATE>;
 				clock-names = "ipg";
-				dmas = <&edma2 89 0 0>, <&edma2 90 0 1>;
-				dma-names = "tx", "rx";
+				dmas =  <&edma2 90 0 1>, <&edma2 89 0 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2023-09-26 14:19 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-09-26 14:18 Fabio Estevam [this message]
2023-09-26 14:31 ` [EXT] [PATCH] arm64: dts: imx93: Fix the dmas entries order Frank Li
2023-09-26 14:41   ` Fabio Estevam
2023-10-10  1:08 ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230926141854.388953-1-festevam@gmail.com \
    --to=festevam@gmail.com \
    --cc=Frank.Li@nxp.com \
    --cc=festevam@denx.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.