Re: [PATCH v6 net-next 0/5] net: dsa: hsr: Enable HSR HW offloading for KSZ9477

[Lukasz Majewski <lukma@denx.de>]

[-- Attachment #1: Type: text/plain, Size: 1721 bytes --]

Hi Vladimir,

> On Fri, Sep 22, 2023 at 03:31:03PM +0200, Lukasz Majewski wrote:
> > This patch series provides support for HSR HW offloading in KSZ9477
> > switch IC.
> > 
> > To test this feature:
> > ip link add name hsr0 type hsr slave1 lan1 slave2 lan2 supervision
> > 45 version 1 ip link set dev lan1 up
> > ip link set dev lan2 up
> > ip a add 192.168.0.1/24 dev hsr0
> > ip link set dev hsr0 up
> > 
> > To remove HSR network device:
> > ip link del hsr0
> > 
> > To test if one can adjust MAC address:
> > ip link set lan2 address 00:01:02:AA:BB:CC
> > 
> > It is also possible to create another HSR interface, but it will
> > only support HSR is software - e.g.
> > ip link add name hsr1 type hsr slave1 lan3 slave2 lan4 supervision
> > 45 version 1
> > 
> > Test HW:
> > Two KSZ9477-EVB boards with HSR ports set to "Port1" and "Port2".
> > 
> > Performance SW used:
> > nuttcp -S --nofork
> > nuttcp -vv -T 60 -r 192.168.0.2
> > nuttcp -vv -T 60 -t 192.168.0.2
> > 
> > Code: v6.6.0-rc2+ Linux net-next repository
> > SHA1: 5a1b322cb0b7d0d33a2d13462294dc0f46911172
> > 
> > Tested HSR v0 and v1
> > Results:
> > With KSZ9477 offloading support added: RX: 100 Mbps TX: 98 Mbps
> > With no offloading 		       RX: 63 Mbps  TX: 63 Mbps  
> 
> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
> 
> Thanks!

I hope, that it will find its way to net-next soon :-).

Thanks for your help and patience.


Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]