All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mike Rapoport <rppt@kernel.org>
To: Yajun Deng <yajun.deng@linux.dev>
Cc: akpm@linux-foundation.org, mike.kravetz@oracle.com,
	muchun.song@linux.dev, willy@infradead.org, david@redhat.com,
	linux-mm@kvack.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 2/2] mm: Init page count in reserve_bootmem_region when MEMINIT_EARLY
Date: Fri, 29 Sep 2023 11:30:18 +0300	[thread overview]
Message-ID: <20230929083018.GU3303@kernel.org> (raw)
In-Reply-To: <20230928083302.386202-3-yajun.deng@linux.dev>

On Thu, Sep 28, 2023 at 04:33:02PM +0800, Yajun Deng wrote:
> memmap_init_range() would init page count of all pages, but the free
> pages count would be reset in __free_pages_core(). There are opposite
> operations. It's unnecessary and time-consuming when it's MEMINIT_EARLY
> context.
> 
> Init page count in reserve_bootmem_region when in MEMINIT_EARLY context,
> and check the page count before reset it.
> 
> At the same time, the INIT_LIST_HEAD in reserve_bootmem_region isn't
> need, as it already done in __init_single_page.
> 
> The following data was tested on an x86 machine with 190GB of RAM.
> 
> before:
> free_low_memory_core_early()    341ms
> 
> after:
> free_low_memory_core_early()    285ms
> 
> Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
> ---
> v4: same with v2.
> v3: same with v2.
> v2: check page count instead of check context before reset it.
> v1: https://lore.kernel.org/all/20230922070923.355656-1-yajun.deng@linux.dev/
> ---
>  mm/mm_init.c    | 18 +++++++++++++-----
>  mm/page_alloc.c | 20 ++++++++++++--------
>  2 files changed, 25 insertions(+), 13 deletions(-)
> 
> diff --git a/mm/mm_init.c b/mm/mm_init.c
> index 9716c8a7ade9..3ab8861e1ef3 100644
> --- a/mm/mm_init.c
> +++ b/mm/mm_init.c
> @@ -718,7 +718,7 @@ static void __meminit init_reserved_page(unsigned long pfn, int nid)
>  		if (zone_spans_pfn(zone, pfn))
>  			break;
>  	}
> -	__init_single_page(pfn_to_page(pfn), pfn, zid, nid, INIT_PAGE_COUNT);
> +	__init_single_page(pfn_to_page(pfn), pfn, zid, nid, 0);
>  }
>  #else
>  static inline void pgdat_set_deferred_range(pg_data_t *pgdat) {}
> @@ -756,8 +756,8 @@ void __meminit reserve_bootmem_region(phys_addr_t start,
>  
>  			init_reserved_page(start_pfn, nid);
>  
> -			/* Avoid false-positive PageTail() */
> -			INIT_LIST_HEAD(&page->lru);
> +			/* Init page count for reserved region */

Please add a comment that describes _why_ we initialize the page count here.

> +			init_page_count(page);
>  
>  			/*
>  			 * no need for atomic set_bit because the struct
> @@ -888,9 +888,17 @@ void __meminit memmap_init_range(unsigned long size, int nid, unsigned long zone
>  		}
>  
>  		page = pfn_to_page(pfn);
> -		__init_single_page(page, pfn, zone, nid, INIT_PAGE_COUNT);
> -		if (context == MEMINIT_HOTPLUG)
> +
> +		/* If the context is MEMINIT_EARLY, we will init page count and
> +		 * mark page reserved in reserve_bootmem_region, the free region
> +		 * wouldn't have page count and we will check the pages count
> +		 * in __free_pages_core.
> +		 */
> +		__init_single_page(page, pfn, zone, nid, 0);
> +		if (context == MEMINIT_HOTPLUG) {
> +			init_page_count(page);
>  			__SetPageReserved(page);

Rather than calling init_page_count() and __SetPageReserved() for
MEMINIT_HOTPLUG you can set flags to INIT_PAGE_COUNT | INIT_PAGE_RESERVED
an call __init_single_page() after the check for MEMINIT_HOTPLUG.

But more generally, I wonder if we have to differentiate HOTPLUG here at all.
@David, can you comment please?

> +		}
>  
>  		/*
>  		 * Usually, we want to mark the pageblock MIGRATE_MOVABLE,
> diff --git a/mm/page_alloc.c b/mm/page_alloc.c
> index 06be8821d833..b868caabe8dc 100644
> --- a/mm/page_alloc.c
> +++ b/mm/page_alloc.c
> @@ -1285,18 +1285,22 @@ void __free_pages_core(struct page *page, unsigned int order)
>  	unsigned int loop;
>  
>  	/*
> -	 * When initializing the memmap, __init_single_page() sets the refcount
> -	 * of all pages to 1 ("allocated"/"not free"). We have to set the
> -	 * refcount of all involved pages to 0.
> +	 * When initializing the memmap, memmap_init_range sets the refcount
> +	 * of all pages to 1 ("reserved" and "free") in hotplug context. We
> +	 * have to set the refcount of all involved pages to 0. Otherwise,
> +	 * we don't do it, as reserve_bootmem_region only set the refcount on
> +	 * reserve region ("reserved") in early context.
>  	 */

Again, why hotplug and early init should be different?

> -	prefetchw(p);
> -	for (loop = 0; loop < (nr_pages - 1); loop++, p++) {
> -		prefetchw(p + 1);
> +	if (page_count(page)) {
> +		prefetchw(p);
> +		for (loop = 0; loop < (nr_pages - 1); loop++, p++) {
> +			prefetchw(p + 1);
> +			__ClearPageReserved(p);
> +			set_page_count(p, 0);
> +		}
>  		__ClearPageReserved(p);
>  		set_page_count(p, 0);
>  	}
> -	__ClearPageReserved(p);
> -	set_page_count(p, 0);
>  
>  	atomic_long_add(nr_pages, &page_zone(page)->managed_pages);
>  
> -- 
> 2.25.1
> 

-- 
Sincerely yours,
Mike.


  reply	other threads:[~2023-09-29  8:31 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-09-28  8:33 [PATCH v4 0/2] mm: Don't set and reset page count in MEMINIT_EARLY Yajun Deng
2023-09-28  8:33 ` [PATCH v4 1/2] mm: pass page count and reserved to __init_single_page Yajun Deng
2023-09-29  8:19   ` Mike Rapoport
2023-09-29  9:37     ` Yajun Deng
2023-09-28  8:33 ` [PATCH v4 2/2] mm: Init page count in reserve_bootmem_region when MEMINIT_EARLY Yajun Deng
2023-09-29  8:30   ` Mike Rapoport [this message]
2023-09-29  9:50     ` Yajun Deng
2023-09-29 10:02       ` Mike Rapoport
2023-09-29 10:27         ` Yajun Deng
2023-10-01 18:59           ` Mike Rapoport
2023-10-02  7:03             ` Yajun Deng
2023-10-02  8:47               ` Mike Rapoport
2023-10-02  8:56                 ` David Hildenbrand
2023-10-02 11:10                   ` Mike Rapoport
2023-10-02 11:25                     ` David Hildenbrand
2023-10-03 14:38                       ` Yajun Deng
2023-10-05  5:06                         ` Mike Rapoport
2023-10-05 14:04                           ` Yajun Deng
2023-10-12  9:19                             ` Mike Rapoport
2023-10-12  9:36                               ` Yajun Deng
2023-10-02  8:30     ` David Hildenbrand
2023-10-08  8:57       ` Yajun Deng
2023-10-10  2:31         ` Yajun Deng
2023-10-12  9:23           ` David Hildenbrand
2023-10-12  9:53             ` Yajun Deng
2023-10-13  8:48               ` Mike Rapoport
2023-10-13  9:29                 ` Yajun Deng
2023-10-16  6:33                   ` Mike Rapoport
2023-10-16  8:10                     ` Yajun Deng
2023-10-16  8:16                       ` David Hildenbrand
2023-10-16  8:32                         ` Yajun Deng
2023-10-16  8:36                           ` David Hildenbrand
2023-10-16 10:17                             ` Yajun Deng
2023-10-17  9:58                               ` Yajun Deng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230929083018.GU3303@kernel.org \
    --to=rppt@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=david@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mike.kravetz@oracle.com \
    --cc=muchun.song@linux.dev \
    --cc=willy@infradead.org \
    --cc=yajun.deng@linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.