From: Roger Quadros <rogerq@kernel.org>
To: trini@konsulko.com, nm@ti.com
Cc: vigneshr@ti.com, m-chawdhry@ti.com, sjg@chromium.org,
jonas@kwiboo.se, srk@ti.com, afd@ti.com, bb@ti.com,
praneeth@ti.com, u-boot@lists.denx.de,
Roger Quadros <rogerq@kernel.org>
Subject: [PATCH 4/6] arm: dts: k3-am642-sk: Mark dependent nodes for pre-relocation phase
Date: Fri, 29 Sep 2023 16:46:44 +0300 [thread overview]
Message-ID: <20230929134646.214781-5-rogerq@kernel.org> (raw)
In-Reply-To: <20230929134646.214781-1-rogerq@kernel.org>
CPSW node needs PHY, MDIO, pinmux, DMA and INTC nodes.
Mark them as 'bootph-all' so they are available in all
pre-relocation phases.
Fixes below dts warnings:
<stdout>: Warning (reg_format): /bus@f4000/ethernet@8000000/mdio@f00/ethernet-phy@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
<stdout>: Warning (unit_address_vs_reg): /bus@f4000/ethernet@8000000/mdio@f00: node has a unit name, but no reg or ranges property
<stdout>: Warning (pci_device_reg): Failed prerequisite 'reg_format'
<stdout>: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
<stdout>: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
<stdout>: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
<stdout>: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
<stdout>: Warning (avoid_default_addr_size): /bus@f4000/ethernet@8000000/mdio@f00/ethernet-phy@1: Relying on default #address-cells value
<stdout>: Warning (avoid_default_addr_size): /bus@f4000/ethernet@8000000/mdio@f00/ethernet-phy@1: Relying on default #size-cells value
<stdout>: Warning (avoid_unnecessary_addr_size): Failed prerequisite 'avoid_default_addr_size'
<stdout>: Warning (unique_unit_address): Failed prerequisite 'avoid_default_addr_size'
<stdout>: Warning (msi_parent_property): /bus@f4000/bus@48000000/dma-controller@485c0100:msi-parent: Could not get phandle node for (cell 0)
<stdout>: Warning (msi_parent_property): /bus@f4000/bus@48000000/dma-controller@485c0000:msi-parent: Could not get phandle node for (cell 0)
<stdout>: Warning (phys_property): /bus@f4000/ethernet@8000000/ethernet-ports/port@2:phys: Could not get phandle node for (cell 0)
Signed-off-by: Roger Quadros <rogerq@kernel.org>
---
arch/arm/dts/k3-am642-sk-u-boot.dtsi | 36 ++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/arch/arm/dts/k3-am642-sk-u-boot.dtsi b/arch/arm/dts/k3-am642-sk-u-boot.dtsi
index 5599977f6c..40a53df0b0 100644
--- a/arch/arm/dts/k3-am642-sk-u-boot.dtsi
+++ b/arch/arm/dts/k3-am642-sk-u-boot.dtsi
@@ -92,6 +92,38 @@
bootph-all;
};
+&inta_main_dmss {
+ bootph-all;
+};
+
+&main_pktdma {
+ bootph-all;
+};
+
+&mdio1_pins_default {
+ bootph-all;
+};
+
+&cpsw3g_mdio {
+ bootph-all;
+};
+
+&cpsw3g_phy0 {
+ bootph-all;
+};
+
+&cpsw3g_phy1 {
+ bootph-all;
+};
+
+&rgmii1_pins_default {
+ bootph-all;
+};
+
+&rgmii2_pins_default {
+ bootph-all;
+};
+
&cpsw3g {
bootph-all;
@@ -100,6 +132,10 @@
};
};
+&phy_gmii_sel {
+ bootph-all;
+};
+
&cpsw_port2 {
bootph-all;
};
--
2.34.1
next prev parent reply other threads:[~2023-09-29 13:47 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-29 13:46 [RESEND PATCH 0/6] arm: dts: k3-am64 / k3-am62: Fix boot Roger Quadros
2023-09-29 13:46 ` [PATCH 1/6] arm: dts: k3-am64-evm: " Roger Quadros
2023-10-02 15:19 ` Nishanth Menon
2023-10-02 16:14 ` Roger Quadros
2023-10-02 16:19 ` Nishanth Menon
2023-10-05 14:49 ` Tom Rini
2023-09-29 13:46 ` [PATCH 2/6] arm: dts: k3-am64-evm: Mark dependent nodes for pre-relocation phase Roger Quadros
2023-10-02 15:20 ` Nishanth Menon
2023-09-29 13:46 ` [PATCH 3/6] arm: dts: k3-am642-sk: Fix boot Roger Quadros
2023-10-02 15:20 ` Nishanth Menon
2023-09-29 13:46 ` Roger Quadros [this message]
2023-10-02 15:20 ` [PATCH 4/6] arm: dts: k3-am642-sk: Mark dependent nodes for pre-relocation phase Nishanth Menon
2023-09-29 13:46 ` [PATCH 5/6] arm: dts: k3-am625-sk: Fix boot Roger Quadros
2023-10-02 15:20 ` Nishanth Menon
2023-09-29 13:46 ` [PATCH 6/6] arm: dts: k3-am625-sk: Mark dependent nodes for pre-relocation phase Roger Quadros
2023-10-02 15:20 ` Nishanth Menon
2023-10-03 20:26 ` [PATCH] arm: dts: k3-am625-beagleplay: Fix boot Jan Kiszka
2023-10-04 10:01 ` Roger Quadros
2023-10-04 12:15 ` Nishanth Menon
2023-10-05 4:18 ` Jan Kiszka
2023-10-05 11:27 ` Nishanth Menon
2023-10-05 14:49 ` Tom Rini
2023-10-05 14:52 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230929134646.214781-5-rogerq@kernel.org \
--to=rogerq@kernel.org \
--cc=afd@ti.com \
--cc=bb@ti.com \
--cc=jonas@kwiboo.se \
--cc=m-chawdhry@ti.com \
--cc=nm@ti.com \
--cc=praneeth@ti.com \
--cc=sjg@chromium.org \
--cc=srk@ti.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.