From: Apurva Nandan <a-nandan@ti.com>
To: Apurva Nandan <a-nandan@ti.com>, Hari Nagalla <hnagalla@ti.com>,
Lukasz Majewski <lukma@denx.de>,
Sean Anderson <seanga2@gmail.com>,
Jaehoon Chung <jh80.chung@samsung.com>,
Neha Malcom Francis <n-francis@ti.com>,
Simon Glass <sjg@chromium.org>, Andrew Davis <afd@ti.com>,
Kamlesh Gurudasani <kamlesh@ti.com>,
Dasnavis Sabiya <sabiya.d@ti.com>,
Manorit Chawdhry <m-chawdhry@ti.com>,
Aradhya Bhatia <a-bhatia1@ti.com>, Bryan Brattlof <bb@ti.com>,
Christian Gmeiner <christian.gmeiner@gmail.com>,
Nishanth Menon <nm@ti.com>,
Heinrich Schuchardt <xypron.glpk@gmx.de>,
Marcel Ziswiler <marcel.ziswiler@toradex.com>,
Roger Quadros <rogerq@kernel.org>,
Jayesh Choudhary <j-choudhary@ti.com>,
Ralph Siemsen <ralph.siemsen@linaro.org>,
Yanhong Wang <yanhong.wang@starfivetech.com>,
Marek Vasut <marek.vasut+renesas@mailbox.org>,
Rasmus Villemoes <rasmus.villemoes@prevas.dk>,
<u-boot@lists.denx.de>,
Sinthu Raja M <sinthu.raja@mistralsolutions.com>,
Udit Kumar <u-kumar1@ti.com>
Subject: [PATCH v4 14/16] configs: j784s4_evm: Add defconfig for j784s4 evm board
Date: Sun, 1 Oct 2023 22:25:43 +0530 [thread overview]
Message-ID: <20231001165545.494212-15-a-nandan@ti.com> (raw)
In-Reply-To: <20231001165545.494212-1-a-nandan@ti.com>
Add defconfigs for building R5 U-Boot SPL and A72 U-Boot.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
---
configs/j784s4_evm_a72_defconfig | 180 +++++++++++++++++++++++++++++++
configs/j784s4_evm_r5_defconfig | 163 ++++++++++++++++++++++++++++
2 files changed, 343 insertions(+)
create mode 100644 configs/j784s4_evm_a72_defconfig
create mode 100644 configs/j784s4_evm_r5_defconfig
diff --git a/configs/j784s4_evm_a72_defconfig b/configs/j784s4_evm_a72_defconfig
new file mode 100644
index 0000000000..093829289c
--- /dev/null
+++ b/configs/j784s4_evm_a72_defconfig
@@ -0,0 +1,180 @@
+CONFIG_ARM=y
+CONFIG_ARCH_K3=y
+CONFIG_TI_SECURE_DEVICE=y
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_SPL_GPIO=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_SOC_K3_J784S4=y
+CONFIG_TARGET_J784S4_A72_EVM=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80480000
+CONFIG_SF_DEFAULT_SPEED=25000000
+CONFIG_ENV_SIZE=0x20000
+CONFIG_DM_GPIO=y
+CONFIG_SPL_DM_SPI=y
+CONFIG_DEFAULT_DEVICE_TREE="k3-j784s4-evm"
+CONFIG_SPL_TEXT_BASE=0x80080000
+CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_DM_RESET=y
+CONFIG_SPL_MMC=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
+CONFIG_SPL_FS_FAT=y
+CONFIG_SPL_LIBDISK_SUPPORT=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI=y
+# CONFIG_PSCI_RESET is not set
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000
+CONFIG_BOOTSTD_FULL=y
+CONFIG_BOOTSTD_DEFAULTS=y
+CONFIG_BOOTCOMMAND="run envboot; bootflow scan -lb"
+CONFIG_LOGLEVEL=7
+CONFIG_SPL_MAX_SIZE=0xc0000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x80a00000
+CONFIG_SPL_BSS_MAX_SIZE=0x80000
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SYS_SPL_MALLOC=y
+CONFIG_SYS_SPL_MALLOC_SIZE=0x800000
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
+CONFIG_SPL_DMA=y
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
+CONFIG_SPL_I2C=y
+CONFIG_SPL_DM_MAILBOX=y
+CONFIG_SPL_MTD_SUPPORT=y
+CONFIG_SPL_DM_SPI_FLASH=y
+CONFIG_SPL_DM_RESET=y
+CONFIG_SPL_POWER_DOMAIN=y
+CONFIG_SPL_RAM_SUPPORT=y
+CONFIG_SPL_RAM_DEVICE=y
+# CONFIG_SPL_SPI_FLASH_TINY is not set
+CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
+CONFIG_SPL_THERMAL=y
+CONFIG_SPL_YMODEM_SUPPORT=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_DFU=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_REMOTEPROC=y
+CONFIG_CMD_UFS=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_UBI=y
+# CONFIG_ISO_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_SPL_MULTI_DTB_FIT=y
+CONFIG_OF_LIST="k3-j784s4-evm"
+CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SPL_SYSCON=y
+CONFIG_SPL_OF_TRANSLATE=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_CLK_CCF=y
+CONFIG_CLK_TI_SCI=y
+CONFIG_DFU_MMC=y
+CONFIG_DFU_RAM=y
+CONFIG_DFU_SF=y
+CONFIG_SYS_DFU_DATA_BUF_SIZE=0x40000
+CONFIG_SYS_DFU_MAX_FILE_SIZE=0x800000
+CONFIG_DMA_CHANNELS=y
+CONFIG_TI_K3_NAVSS_UDMA=y
+CONFIG_TI_SCI_PROTOCOL=y
+CONFIG_DA8XX_GPIO=y
+CONFIG_DM_PCA953X=y
+CONFIG_DM_I2C=y
+CONFIG_DM_I2C_GPIO=y
+CONFIG_SYS_I2C_OMAP24XX=y
+CONFIG_DM_MAILBOX=y
+CONFIG_K3_SEC_PROXY=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_SPL_MMC_HS400_SUPPORT=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ADMA=y
+CONFIG_SPL_MMC_SDHCI_ADMA=y
+CONFIG_MMC_SDHCI_AM654=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_CFI_FLASH=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_FLASH_CFI_MTD=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_SYS_MAX_FLASH_BANKS_DETECT=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_SOFT_RESET=y
+CONFIG_SPI_FLASH_SOFT_RESET_ON_BOOT=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_S28HX_T=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_MT35XU=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_MULTIPLEXER=y
+CONFIG_MUX_MMIO=y
+CONFIG_PHY_TI_DP83867=y
+CONFIG_PHY_FIXED=y
+CONFIG_TI_AM65_CPSW_NUSS=y
+CONFIG_PHY=y
+CONFIG_SPL_PHY=y
+CONFIG_PHY_CADENCE_TORRENT=y
+CONFIG_PHY_J721E_WIZ=y
+CONFIG_PINCTRL=y
+# CONFIG_PINCTRL_GENERIC is not set
+CONFIG_SPL_PINCTRL=y
+# CONFIG_SPL_PINCTRL_GENERIC is not set
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_TI_SCI_POWER_DOMAIN=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_RAM=y
+CONFIG_SPL_RAM=y
+CONFIG_REMOTEPROC_TI_K3_DSP=y
+CONFIG_REMOTEPROC_TI_K3_R5F=y
+CONFIG_RESET_TI_SCI=y
+CONFIG_SCSI=y
+CONFIG_DM_SCSI=y
+CONFIG_DM_SERIAL=y
+CONFIG_SOC_DEVICE=y
+CONFIG_SOC_DEVICE_TI_K3=y
+CONFIG_SOC_TI=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_CADENCE_QSPI=y
+CONFIG_SYSRESET=y
+CONFIG_SPL_SYSRESET=y
+CONFIG_SYSRESET_TI_SCI=y
+CONFIG_DM_THERMAL=y
+CONFIG_UFS=y
+CONFIG_CADENCE_UFS=y
+CONFIG_TI_J721E_UFS=y
diff --git a/configs/j784s4_evm_r5_defconfig b/configs/j784s4_evm_r5_defconfig
new file mode 100644
index 0000000000..a49850870d
--- /dev/null
+++ b/configs/j784s4_evm_r5_defconfig
@@ -0,0 +1,163 @@
+CONFIG_ARM=y
+CONFIG_ARCH_K3=y
+CONFIG_TI_SECURE_DEVICE=y
+CONFIG_SYS_MALLOC_F_LEN=0x10000
+CONFIG_SPL_GPIO=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SOC_K3_J784S4=y
+CONFIG_K3_EARLY_CONS=y
+CONFIG_TARGET_J784S4_R5_EVM=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x41c76000
+CONFIG_SF_DEFAULT_SPEED=25000000
+CONFIG_ENV_SIZE=0x20000
+CONFIG_DM_GPIO=y
+CONFIG_SPL_DM_SPI=y
+CONFIG_DEFAULT_DEVICE_TREE="k3-j784s4-r5-evm"
+CONFIG_SPL_TEXT_BASE=0x41c00000
+CONFIG_DM_RESET=y
+CONFIG_SPL_MMC=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
+CONFIG_SPL_SIZE_LIMIT=0x80000
+CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x4000
+CONFIG_SPL_FS_FAT=y
+CONFIG_SPL_LIBDISK_SUPPORT=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000
+CONFIG_USE_BOOTCOMMAND=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y
+CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y
+CONFIG_SPL_MAX_SIZE=0xc0000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x41c76000
+CONFIG_SPL_BSS_MAX_SIZE=0xa000
+CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x140000
+CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SYS_SPL_MALLOC=y
+CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
+CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x84000000
+CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000
+CONFIG_SPL_EARLY_BSS=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400
+CONFIG_SPL_DMA=y
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_FS_EXT4=y
+CONFIG_SPL_I2C=y
+CONFIG_SPL_DM_MAILBOX=y
+CONFIG_SPL_MTD_SUPPORT=y
+CONFIG_SPL_DM_SPI_FLASH=y
+CONFIG_SPL_DM_RESET=y
+CONFIG_SPL_POWER_DOMAIN=y
+CONFIG_SPL_RAM_SUPPORT=y
+CONFIG_SPL_RAM_DEVICE=y
+CONFIG_SPL_REMOTEPROC=y
+# CONFIG_SPL_SPI_FLASH_TINY is not set
+CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000
+CONFIG_SPL_THERMAL=y
+CONFIG_SPL_YMODEM_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_CMD_DFU=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_REMOTEPROC=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_SPL_MULTI_DTB_FIT=y
+CONFIG_SPL_OF_LIST="k3-j784s4-r5-evm"
+CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
+CONFIG_SPL_OF_TRANSLATE=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_SPL_CLK_CCF=y
+CONFIG_SPL_CLK_K3_PLL=y
+CONFIG_SPL_CLK_K3=y
+CONFIG_SYS_DFU_DATA_BUF_SIZE=0x40000
+CONFIG_DMA_CHANNELS=y
+CONFIG_TI_K3_NAVSS_UDMA=y
+CONFIG_TI_SCI_PROTOCOL=y
+CONFIG_DA8XX_GPIO=y
+CONFIG_DM_PCA953X=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_I2C_OMAP24XX=y
+CONFIG_DM_MAILBOX=y
+CONFIG_K3_SEC_PROXY=y
+CONFIG_FS_LOADER=y
+CONFIG_SPL_FS_LOADER=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_SPL_MMC_HS400_SUPPORT=y
+CONFIG_MMC_SDHCI=y
+CONFIG_SPL_MMC_SDHCI_ADMA=y
+CONFIG_MMC_SDHCI_AM654=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_CFI_FLASH=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_FLASH_CFI_MTD=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_SYS_MAX_FLASH_BANKS_DETECT=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_SOFT_RESET=y
+CONFIG_SPI_FLASH_SOFT_RESET_ON_BOOT=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_S28HX_T=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_MT35XU=y
+CONFIG_PINCTRL=y
+# CONFIG_PINCTRL_GENERIC is not set
+CONFIG_SPL_PINCTRL=y
+# CONFIG_SPL_PINCTRL_GENERIC is not set
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_TI_POWER_DOMAIN=y
+CONFIG_K3_SYSTEM_CONTROLLER=y
+CONFIG_REMOTEPROC_TI_K3_ARM64=y
+CONFIG_RESET_TI_SCI=y
+CONFIG_DM_SERIAL=y
+CONFIG_SOC_DEVICE=y
+CONFIG_SOC_DEVICE_TI_K3=y
+CONFIG_SOC_TI=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_CADENCE_QSPI=y
+CONFIG_SYSRESET=y
+CONFIG_SPL_SYSRESET=y
+CONFIG_SYSRESET_TI_SCI=y
+CONFIG_DM_THERMAL=y
+CONFIG_TIMER=y
+CONFIG_SPL_TIMER=y
+CONFIG_OMAP_TIMER=y
+CONFIG_FS_EXT4=y
+CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
+CONFIG_PANIC_HANG=y
+CONFIG_LIB_RATIONAL=y
+CONFIG_SPL_LIB_RATIONAL=y
--
2.34.1
next prev parent reply other threads:[~2023-10-01 16:58 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-01 16:55 [PATCH v4 00/16] Introduce initial TI's J784S4 and AM69 support Apurva Nandan
2023-10-01 16:55 ` [PATCH v4 01/16] arm: dts: Introduce j784s4 dts from linux kernel Apurva Nandan
2023-10-01 16:55 ` [PATCH v4 02/16] arm: mach-k3: Add basic support for J784S4 SoC definition Apurva Nandan
2023-10-02 16:01 ` Nishanth Menon
2023-10-04 5:13 ` Manorit Chawdhry
2023-10-04 12:24 ` Nishanth Menon
2023-10-05 4:59 ` Manorit Chawdhry
2023-10-05 11:26 ` Nishanth Menon
2023-10-06 4:16 ` Manorit Chawdhry
2023-10-06 11:13 ` Nishanth Menon
2023-10-09 5:08 ` Manorit Chawdhry
2023-10-04 17:52 ` Apurva Nandan
2023-10-04 18:06 ` Nishanth Menon
2023-11-22 15:15 ` Andrew Davis
2023-10-04 17:57 ` Apurva Nandan
2023-10-01 16:55 ` [PATCH v4 03/16] arm: mach-k3: Sort SoC JTAG_ID entries Apurva Nandan
2023-10-02 15:54 ` Nishanth Menon
2023-10-01 16:55 ` [PATCH v4 04/16] soc: ti: k3-socinfo: Add entry for J784S4 SoC Apurva Nandan
2023-10-01 16:55 ` [PATCH v4 05/16] arm: mach-k3: j784s4: Add clk and power support Apurva Nandan
2023-10-01 16:55 ` [PATCH v4 06/16] drivers: dma: Add support for J784S4 SoC Apurva Nandan
2023-10-01 16:55 ` [PATCH v4 07/16] remoteproc: k3-r5: Extend support for R5F clusters on J784S4 SoCs Apurva Nandan
2023-10-02 15:52 ` Nishanth Menon
2023-10-01 16:55 ` [PATCH v4 08/16] remoteproc: k3-dsp: Extend support for C71x DSPs " Apurva Nandan
2023-10-01 16:55 ` [PATCH v4 09/16] board: ti: j784s4: Add board support for J784S4 EVM Apurva Nandan
2023-10-02 15:51 ` Nishanth Menon
2023-10-04 18:01 ` Apurva Nandan
2023-10-04 18:05 ` Nishanth Menon
2023-10-12 17:55 ` Tom Rini
2023-10-01 16:55 ` [PATCH v4 10/16] arm: dts: Introduce j784s4 u-boot dts files Apurva Nandan
2023-10-02 14:04 ` Jerome Forissier
2023-10-04 18:02 ` Apurva Nandan
2023-10-01 16:55 ` [PATCH v4 11/16] arm: dts: Introduce am69-sk dts from linux kernel Apurva Nandan
2023-10-01 16:55 ` [PATCH v4 12/16] board: ti: j784s4: Update env to use am69-sk dtb Apurva Nandan
2023-10-02 15:39 ` Nishanth Menon
2023-10-01 16:55 ` [PATCH v4 13/16] arm: dts: Introduce am69-sk u-boot dts files Apurva Nandan
2023-10-01 16:55 ` Apurva Nandan [this message]
2023-10-01 16:55 ` [PATCH v4 15/16] configs: Add am69_sk_* defconfig fragments Apurva Nandan
2023-10-01 16:55 ` [PATCH v4 16/16] doc: board: ti: k3: Add J784S4 EVM and AM69 SK documentation Apurva Nandan
2023-10-02 15:26 ` Nishanth Menon
2023-10-02 16:58 ` Bryan Brattlof
2023-10-02 22:55 ` Heinrich Schuchardt
2023-10-04 18:03 ` Apurva Nandan
2023-10-02 15:33 ` [PATCH v4 00/16] Introduce initial TI's J784S4 and AM69 support Nishanth Menon
2023-11-15 13:53 ` Maxime Ripard
2023-11-16 22:56 ` Enric Balletbo i Serra
2023-11-17 4:02 ` Kumar, Udit
2023-11-17 12:49 ` Bryan Brattlof
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231001165545.494212-15-a-nandan@ti.com \
--to=a-nandan@ti.com \
--cc=a-bhatia1@ti.com \
--cc=afd@ti.com \
--cc=bb@ti.com \
--cc=christian.gmeiner@gmail.com \
--cc=hnagalla@ti.com \
--cc=j-choudhary@ti.com \
--cc=jh80.chung@samsung.com \
--cc=kamlesh@ti.com \
--cc=lukma@denx.de \
--cc=m-chawdhry@ti.com \
--cc=marcel.ziswiler@toradex.com \
--cc=marek.vasut+renesas@mailbox.org \
--cc=n-francis@ti.com \
--cc=nm@ti.com \
--cc=ralph.siemsen@linaro.org \
--cc=rasmus.villemoes@prevas.dk \
--cc=rogerq@kernel.org \
--cc=sabiya.d@ti.com \
--cc=seanga2@gmail.com \
--cc=sinthu.raja@mistralsolutions.com \
--cc=sjg@chromium.org \
--cc=u-boot@lists.denx.de \
--cc=u-kumar1@ti.com \
--cc=xypron.glpk@gmx.de \
--cc=yanhong.wang@starfivetech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.