From: Rob Herring <robh@kernel.org>
To: Arnd Bergmann <arnd@arndb.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Michal Simek <michal.simek@amd.com>
Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH] char: xilinx_hwicap: Modernize driver probe
Date: Fri, 6 Oct 2023 16:42:28 -0500 [thread overview]
Message-ID: <20231006214228.337064-1-robh@kernel.org> (raw)
Rework Xilinx hwicap driver probe to use current best practices using
devres APIs, device_get_match_data(), and typed firmware property accessors.
There's no longer any non-DT probing, so CONFIG_OF ifdefs can be dropped.
Signed-off-by: Rob Herring <robh@kernel.org>
---
drivers/char/xilinx_hwicap/xilinx_hwicap.c | 138 +++------------------
1 file changed, 19 insertions(+), 119 deletions(-)
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index f60bb6151402..019cf6079cec 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -84,18 +84,13 @@
#include <linux/sysctl.h>
#include <linux/fs.h>
#include <linux/cdev.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/uaccess.h>
-#ifdef CONFIG_OF
-/* For open firmware. */
-#include <linux/of_address.h>
-#include <linux/of_device.h>
-#include <linux/of_platform.h>
-#endif
-
#include "xilinx_hwicap.h"
#include "buffer_icap.h"
#include "fifo_icap.h"
@@ -601,14 +596,14 @@ static const struct file_operations hwicap_fops = {
.llseek = noop_llseek,
};
-static int hwicap_setup(struct device *dev, int id,
- const struct resource *regs_res,
+static int hwicap_setup(struct platform_device *pdev, int id,
const struct hwicap_driver_config *config,
const struct config_registers *config_regs)
{
dev_t devt;
struct hwicap_drvdata *drvdata = NULL;
- int retval = 0;
+ struct device *dev = &pdev->dev;
+ int retval;
dev_info(dev, "Xilinx icap port driver\n");
@@ -636,72 +631,39 @@ static int hwicap_setup(struct device *dev, int id,
devt = MKDEV(XHWICAP_MAJOR, XHWICAP_MINOR + id);
- drvdata = kzalloc(sizeof(struct hwicap_drvdata), GFP_KERNEL);
+ drvdata = devm_kzalloc(dev, sizeof(struct hwicap_drvdata), GFP_KERNEL);
if (!drvdata) {
retval = -ENOMEM;
- goto failed0;
+ goto failed;
}
dev_set_drvdata(dev, (void *)drvdata);
- if (!regs_res) {
- dev_err(dev, "Couldn't get registers resource\n");
- retval = -EFAULT;
- goto failed1;
- }
-
- drvdata->mem_start = regs_res->start;
- drvdata->mem_end = regs_res->end;
- drvdata->mem_size = resource_size(regs_res);
-
- if (!request_mem_region(drvdata->mem_start,
- drvdata->mem_size, DRIVER_NAME)) {
- dev_err(dev, "Couldn't lock memory region at %Lx\n",
- (unsigned long long) regs_res->start);
- retval = -EBUSY;
- goto failed1;
+ drvdata->base_address = devm_platform_ioremap_resource(pdev, 0);
+ if (!drvdata->base_address) {
+ retval = -ENODEV;
+ goto failed;
}
drvdata->devt = devt;
drvdata->dev = dev;
- drvdata->base_address = ioremap(drvdata->mem_start, drvdata->mem_size);
- if (!drvdata->base_address) {
- dev_err(dev, "ioremap() failed\n");
- retval = -ENOMEM;
- goto failed2;
- }
-
drvdata->config = config;
drvdata->config_regs = config_regs;
mutex_init(&drvdata->sem);
drvdata->is_open = 0;
- dev_info(dev, "ioremap %llx to %p with size %llx\n",
- (unsigned long long) drvdata->mem_start,
- drvdata->base_address,
- (unsigned long long) drvdata->mem_size);
-
cdev_init(&drvdata->cdev, &hwicap_fops);
drvdata->cdev.owner = THIS_MODULE;
retval = cdev_add(&drvdata->cdev, devt, 1);
if (retval) {
dev_err(dev, "cdev_add() failed\n");
- goto failed3;
+ goto failed;
}
device_create(&icap_class, dev, devt, NULL, "%s%d", DRIVER_NAME, id);
return 0; /* success */
- failed3:
- iounmap(drvdata->base_address);
-
- failed2:
- release_mem_region(regs_res->start, drvdata->mem_size);
-
- failed1:
- kfree(drvdata);
-
- failed0:
+ failed:
mutex_lock(&icap_sem);
probed_devices[id] = 0;
mutex_unlock(&icap_sem);
@@ -723,75 +685,22 @@ static struct hwicap_driver_config fifo_icap_config = {
.reset = fifo_icap_reset,
};
-#ifdef CONFIG_OF
-static int hwicap_of_probe(struct platform_device *op,
- const struct hwicap_driver_config *config)
-{
- struct resource res;
- const unsigned int *id;
- const char *family;
- int rc;
- const struct config_registers *regs;
-
-
- rc = of_address_to_resource(op->dev.of_node, 0, &res);
- if (rc) {
- dev_err(&op->dev, "invalid address\n");
- return rc;
- }
-
- id = of_get_property(op->dev.of_node, "port-number", NULL);
-
- /* It's most likely that we're using V4, if the family is not
- * specified
- */
- regs = &v4_config_registers;
- family = of_get_property(op->dev.of_node, "xlnx,family", NULL);
-
- if (family) {
- if (!strcmp(family, "virtex2p"))
- regs = &v2_config_registers;
- else if (!strcmp(family, "virtex4"))
- regs = &v4_config_registers;
- else if (!strcmp(family, "virtex5"))
- regs = &v5_config_registers;
- else if (!strcmp(family, "virtex6"))
- regs = &v6_config_registers;
- }
- return hwicap_setup(&op->dev, id ? *id : -1, &res, config,
- regs);
-}
-#else
-static inline int hwicap_of_probe(struct platform_device *op,
- const struct hwicap_driver_config *config)
-{
- return -EINVAL;
-}
-#endif /* CONFIG_OF */
-
-static const struct of_device_id hwicap_of_match[];
static int hwicap_drv_probe(struct platform_device *pdev)
{
- const struct of_device_id *match;
- struct resource *res;
const struct config_registers *regs;
+ const struct hwicap_driver_config *config;
const char *family;
+ int id = -1;
- match = of_match_device(hwicap_of_match, &pdev->dev);
- if (match)
- return hwicap_of_probe(pdev, match->data);
+ config = device_get_match_data(&pdev->dev);
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -ENODEV;
+ of_property_read_u32(pdev->dev.of_node, "port-number", &id);
/* It's most likely that we're using V4, if the family is not
* specified
*/
regs = &v4_config_registers;
- family = pdev->dev.platform_data;
-
- if (family) {
+ if (!of_property_read_string(pdev->dev.of_node, "xlnx,family", &family)) {
if (!strcmp(family, "virtex2p"))
regs = &v2_config_registers;
else if (!strcmp(family, "virtex4"))
@@ -801,9 +710,7 @@ static int hwicap_drv_probe(struct platform_device *pdev)
else if (!strcmp(family, "virtex6"))
regs = &v6_config_registers;
}
-
- return hwicap_setup(&pdev->dev, pdev->id, res,
- &buffer_icap_config, regs);
+ return hwicap_setup(pdev, id, config, regs);
}
static void hwicap_drv_remove(struct platform_device *pdev)
@@ -815,16 +722,12 @@ static void hwicap_drv_remove(struct platform_device *pdev)
device_destroy(&icap_class, drvdata->devt);
cdev_del(&drvdata->cdev);
- iounmap(drvdata->base_address);
- release_mem_region(drvdata->mem_start, drvdata->mem_size);
- kfree(drvdata);
mutex_lock(&icap_sem);
probed_devices[MINOR(dev->devt)-XHWICAP_MINOR] = 0;
mutex_unlock(&icap_sem);
}
-#ifdef CONFIG_OF
/* Match table for device tree binding */
static const struct of_device_id hwicap_of_match[] = {
{ .compatible = "xlnx,opb-hwicap-1.00.b", .data = &buffer_icap_config},
@@ -832,9 +735,6 @@ static const struct of_device_id hwicap_of_match[] = {
{},
};
MODULE_DEVICE_TABLE(of, hwicap_of_match);
-#else
-#define hwicap_of_match NULL
-#endif
static struct platform_driver hwicap_platform_driver = {
.probe = hwicap_drv_probe,
--
2.40.1
reply other threads:[~2023-10-06 21:42 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231006214228.337064-1-robh@kernel.org \
--to=robh@kernel.org \
--cc=arnd@arndb.de \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.simek@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.