* Re: [PATCH v4 1/2] dt-bindings: backlight: Add MPS MP3309C
@ 2023-10-10 16:15 ` Rob Herring
0 siblings, 0 replies; 8+ messages in thread
From: Rob Herring @ 2023-10-10 16:15 UTC (permalink / raw)
To: Flavio Suligoi
Cc: devicetree, Daniel Thompson, linux-kernel, Pavel Machek,
Jingoo Han, Helge Deller, Lee Jones, Conor Dooley, dri-devel,
linux-fbdev, Krzysztof Kozlowski, linux-leds
On Tue, Oct 10, 2023 at 02:16:21PM +0200, Flavio Suligoi wrote:
> The Monolithic Power (MPS) MP3309C is a WLED step-up converter, featuring a
> programmable switching frequency to optimize efficiency.
> The brightness can be controlled either by I2C commands (called "analog"
> mode) or by a PWM input signal (PWM mode).
> This driver supports both modes.
>
> For device driver details, please refer to:
> - drivers/video/backlight/mp3309c_bl.c
>
> The datasheet is available at:
> - https://www.monolithicpower.com/en/mp3309c.html
>
> Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
> ---
>
> v4:
> - remove not more used allOf keyword
> - add brightness-levels and default-brightness properties
> - remove max-brightness and default-brightness from required properties
> - update example, adding brightness-levels and default-brightness properties
> v3:
> - add default value for mps,overvoltage-protection-microvolt property
> - fix the example, changing from "mps,mp3309c-backlight" to "mps,mp3309c" in
> compatible property
> v2:
> - remove useless properties (dimming-mode, pinctrl-names, pinctrl-0,
> switch-on-delay-ms, switch-off-delay-ms, reset-gpios, reset-on-delay-ms,
> reset-on-length-ms)
> - add common.yaml#
> - remove already included properties (default-brightness, max-brightness)
> - substitute three boolean properties, used for the overvoltage-protection
> values, with a single enum property
> - remove some conditional definitions
> - remove the 2nd example
> v1:
> - first version
>
> .../bindings/leds/backlight/mps,mp3309c.yaml | 82 +++++++++++++++++++
> 1 file changed, 82 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
>
> diff --git a/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
> new file mode 100644
> index 000000000000..e2f9ae2b3fb4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
> @@ -0,0 +1,82 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/backlight/mps,mp3309c.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MPS MP3309C backlight
> +
> +maintainers:
> + - Flavio Suligoi <f.suligoi@asem.it>
> +
> +description: |
> + The Monolithic Power (MPS) MP3309C is a WLED step-up converter, featuring a
> + programmable switching frequency to optimize efficiency.
> + It supports two different dimming modes:
> +
> + - analog mode, via I2C commands, as default mode (32 dimming levels)
> + - PWM controlled mode (optional)
> +
> + The datasheet is available at:
> + https://www.monolithicpower.com/en/mp3309c.html
> +
> +properties:
> + compatible:
> + const: mps,mp3309c
> +
> + reg:
> + maxItems: 1
> +
> + pwms:
> + description: if present, the backlight is controlled in PWM mode.
> + maxItems: 1
> +
> + enable-gpios:
> + description: GPIO used to enable the backlight in "analog-i2c" dimming mode.
> + maxItems: 1
> +
> + brightness-levels:
> + description:
> + Array of distinct brightness levels, in PWM dimming mode.
> + Typically these are in the range from 0 to 255, but any range starting
> + at 0 will do.
> + The 0 value means a 0% duty cycle (darkest/off), while the last value in
> + the array represents a 100% duty cycle (brightest).
> + $ref: /schemas/types.yaml#/definitions/uint32-array
This already has a type defined. Please add it to backlight/common.yaml
and remove from led-backlight.yaml and pwm-backlight.yaml.
You say 0-255 here, but your example is 0-10. One of those seems wrong.
Anyways, don't define constraints in prose, use a schema:
items:
maximum: 10 (or 255?)
> +
> + default-brightness:
> + description:
> + The default brightness (index into the levels array).
> + $ref: /schemas/types.yaml#/definitions/uint32
Already has a type. You need to reference backlight/common.yaml.
> +
> + mps,overvoltage-protection-microvolt:
> + description: Overvoltage protection (13.5V, 24V or 35.5V).
> + enum: [ 13500000, 24000000, 35500000 ]
> + default: 35500000
> +
> + mps,no-sync-mode:
> + description: disable synchronous rectification mode
> + type: boolean
> +
> +required:
> + - compatible
> + - reg
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* Backlight with PWM control */
> + backlight_pwm: backlight@17 {
> + compatible = "mps,mp3309c";
> + reg = <0x17>;
> + pwms = <&pwm1 0 3333333 0>; /* 300 Hz --> (1/f) * 1*10^9 */
> + brightness-levels = <0 1 2 3 4 5 6 7 8 9 10>;
> + default-brightness = <8>;
> + mps,overvoltage-protection-microvolt = <24000000>;
> + };
> + };
> --
> 2.34.1
>
^ permalink raw reply [flat|nested] 8+ messages in thread* RE: [PATCH v4 1/2] dt-bindings: backlight: Add MPS MP3309C
2023-10-10 16:15 ` Rob Herring
@ 2023-10-11 11:52 ` Flavio Suligoi
-1 siblings, 0 replies; 8+ messages in thread
From: Flavio Suligoi @ 2023-10-11 11:52 UTC (permalink / raw)
To: Rob Herring
Cc: Lee Jones, Daniel Thompson, Jingoo Han, Helge Deller,
Pavel Machek, Krzysztof Kozlowski, Conor Dooley,
dri-devel@lists.freedesktop.org, linux-leds@vger.kernel.org,
devicetree@vger.kernel.org, linux-fbdev@vger.kernel.org,
linux-kernel@vger.kernel.org
Hi Rob,
...
> > .../bindings/leds/backlight/mps,mp3309c.yaml | 82
> > +++++++++++++++++++
> > 1 file changed, 82 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
> > b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
> > new file mode 100644
> > index 000000000000..e2f9ae2b3fb4
> > --- /dev/null
> > +++
> b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yam
> > +++ l
> > @@ -0,0 +1,82 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/leds/backlight/mps,mp3309c.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: MPS MP3309C backlight
> > +
> > +maintainers:
> > + - Flavio Suligoi <f.suligoi@asem.it>
> > +
> > +description: |
> > + The Monolithic Power (MPS) MP3309C is a WLED step-up converter,
> > +featuring a
> > + programmable switching frequency to optimize efficiency.
> > + It supports two different dimming modes:
> > +
> > + - analog mode, via I2C commands, as default mode (32 dimming
> > + levels)
> > + - PWM controlled mode (optional)
> > +
> > + The datasheet is available at:
> > + https://www.monolithicpower.com/en/mp3309c.html
> > +
> > +properties:
> > + compatible:
> > + const: mps,mp3309c
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + pwms:
> > + description: if present, the backlight is controlled in PWM mode.
> > + maxItems: 1
> > +
> > + enable-gpios:
> > + description: GPIO used to enable the backlight in "analog-i2c" dimming
> mode.
> > + maxItems: 1
> > +
> > + brightness-levels:
> > + description:
> > + Array of distinct brightness levels, in PWM dimming mode.
> > + Typically these are in the range from 0 to 255, but any range starting
> > + at 0 will do.
> > + The 0 value means a 0% duty cycle (darkest/off), while the last value in
> > + the array represents a 100% duty cycle (brightest).
> > + $ref: /schemas/types.yaml#/definitions/uint32-array
>
> This already has a type defined. Please add it to backlight/common.yaml and
> remove from led-backlight.yaml and pwm-backlight.yaml.
Ok, I'll add common.yaml and I'll prepare two other separate patches for these.
>
> You say 0-255 here, but your example is 0-10. One of those seems wrong.
> Anyways, don't define constraints in prose, use a schema:
>
> items:
> maximum: 10 (or 255?)
Ok, I'll add maximum, and I'll change the example, using 0..255
>
> > +
> > + default-brightness:
> > + description:
> > + The default brightness (index into the levels array).
> > + $ref: /schemas/types.yaml#/definitions/uint32
>
> Already has a type. You need to reference backlight/common.yaml.
Ok
>
> > +
> > + mps,overvoltage-protection-microvolt:
> > + description: Overvoltage protection (13.5V, 24V or 35.5V).
> > + enum: [ 13500000, 24000000, 35500000 ]
> > + default: 35500000
> > +
> > + mps,no-sync-mode:
> > + description: disable synchronous rectification mode
> > + type: boolean
> > +
> > +required:
> > + - compatible
> > + - reg
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > + - |
> > + i2c {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + /* Backlight with PWM control */
> > + backlight_pwm: backlight@17 {
> > + compatible = "mps,mp3309c";
> > + reg = <0x17>;
> > + pwms = <&pwm1 0 3333333 0>; /* 300 Hz --> (1/f) * 1*10^9 */
> > + brightness-levels = <0 1 2 3 4 5 6 7 8 9 10>;
> > + default-brightness = <8>;
> > + mps,overvoltage-protection-microvolt = <24000000>;
> > + };
> > + };
> > --
> > 2.34.1
> >
Thanks,
Flavio
^ permalink raw reply [flat|nested] 8+ messages in thread* RE: [PATCH v4 1/2] dt-bindings: backlight: Add MPS MP3309C
@ 2023-10-11 11:52 ` Flavio Suligoi
0 siblings, 0 replies; 8+ messages in thread
From: Flavio Suligoi @ 2023-10-11 11:52 UTC (permalink / raw)
To: Rob Herring
Cc: devicetree@vger.kernel.org, Daniel Thompson,
linux-kernel@vger.kernel.org, Pavel Machek, Jingoo Han,
Helge Deller, Lee Jones, Conor Dooley,
dri-devel@lists.freedesktop.org, linux-fbdev@vger.kernel.org,
Krzysztof Kozlowski, linux-leds@vger.kernel.org
Hi Rob,
...
> > .../bindings/leds/backlight/mps,mp3309c.yaml | 82
> > +++++++++++++++++++
> > 1 file changed, 82 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
> > b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
> > new file mode 100644
> > index 000000000000..e2f9ae2b3fb4
> > --- /dev/null
> > +++
> b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yam
> > +++ l
> > @@ -0,0 +1,82 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/leds/backlight/mps,mp3309c.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: MPS MP3309C backlight
> > +
> > +maintainers:
> > + - Flavio Suligoi <f.suligoi@asem.it>
> > +
> > +description: |
> > + The Monolithic Power (MPS) MP3309C is a WLED step-up converter,
> > +featuring a
> > + programmable switching frequency to optimize efficiency.
> > + It supports two different dimming modes:
> > +
> > + - analog mode, via I2C commands, as default mode (32 dimming
> > + levels)
> > + - PWM controlled mode (optional)
> > +
> > + The datasheet is available at:
> > + https://www.monolithicpower.com/en/mp3309c.html
> > +
> > +properties:
> > + compatible:
> > + const: mps,mp3309c
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + pwms:
> > + description: if present, the backlight is controlled in PWM mode.
> > + maxItems: 1
> > +
> > + enable-gpios:
> > + description: GPIO used to enable the backlight in "analog-i2c" dimming
> mode.
> > + maxItems: 1
> > +
> > + brightness-levels:
> > + description:
> > + Array of distinct brightness levels, in PWM dimming mode.
> > + Typically these are in the range from 0 to 255, but any range starting
> > + at 0 will do.
> > + The 0 value means a 0% duty cycle (darkest/off), while the last value in
> > + the array represents a 100% duty cycle (brightest).
> > + $ref: /schemas/types.yaml#/definitions/uint32-array
>
> This already has a type defined. Please add it to backlight/common.yaml and
> remove from led-backlight.yaml and pwm-backlight.yaml.
Ok, I'll add common.yaml and I'll prepare two other separate patches for these.
>
> You say 0-255 here, but your example is 0-10. One of those seems wrong.
> Anyways, don't define constraints in prose, use a schema:
>
> items:
> maximum: 10 (or 255?)
Ok, I'll add maximum, and I'll change the example, using 0..255
>
> > +
> > + default-brightness:
> > + description:
> > + The default brightness (index into the levels array).
> > + $ref: /schemas/types.yaml#/definitions/uint32
>
> Already has a type. You need to reference backlight/common.yaml.
Ok
>
> > +
> > + mps,overvoltage-protection-microvolt:
> > + description: Overvoltage protection (13.5V, 24V or 35.5V).
> > + enum: [ 13500000, 24000000, 35500000 ]
> > + default: 35500000
> > +
> > + mps,no-sync-mode:
> > + description: disable synchronous rectification mode
> > + type: boolean
> > +
> > +required:
> > + - compatible
> > + - reg
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > + - |
> > + i2c {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + /* Backlight with PWM control */
> > + backlight_pwm: backlight@17 {
> > + compatible = "mps,mp3309c";
> > + reg = <0x17>;
> > + pwms = <&pwm1 0 3333333 0>; /* 300 Hz --> (1/f) * 1*10^9 */
> > + brightness-levels = <0 1 2 3 4 5 6 7 8 9 10>;
> > + default-brightness = <8>;
> > + mps,overvoltage-protection-microvolt = <24000000>;
> > + };
> > + };
> > --
> > 2.34.1
> >
Thanks,
Flavio
^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: [PATCH v4 1/2] dt-bindings: backlight: Add MPS MP3309C
2023-10-10 16:15 ` Rob Herring
@ 2023-10-11 15:13 ` Flavio Suligoi
-1 siblings, 0 replies; 8+ messages in thread
From: Flavio Suligoi @ 2023-10-11 15:13 UTC (permalink / raw)
To: Rob Herring
Cc: Lee Jones, Daniel Thompson, Jingoo Han, Helge Deller,
Pavel Machek, Krzysztof Kozlowski, Conor Dooley,
dri-devel@lists.freedesktop.org, linux-leds@vger.kernel.org,
devicetree@vger.kernel.org, linux-fbdev@vger.kernel.org,
linux-kernel@vger.kernel.org
Hi Rob,
just a question about led-backlight.yaml and pwm-backlight.yaml
common properties.
...
> > +
> > + brightness-levels:
> > + description:
> > + Array of distinct brightness levels, in PWM dimming mode.
> > + Typically these are in the range from 0 to 255, but any range starting
> > + at 0 will do.
> > + The 0 value means a 0% duty cycle (darkest/off), while the last value in
> > + the array represents a 100% duty cycle (brightest).
> > + $ref: /schemas/types.yaml#/definitions/uint32-array
>
> This already has a type defined. Please add it to backlight/common.yaml and
> remove from led-backlight.yaml and pwm-backlight.yaml.
As well as the brightness-levels property, also the default-brightness-level is in common
between led-backlight.yaml and pwm-backlight.yaml.
What do you think about removing it from both led-backlight.yaml and pwm-backlight.yaml, and
moving it into backlight/common.yaml?
>
> You say 0-255 here, but your example is 0-10. One of those seems wrong.
> Anyways, don't define constraints in prose, use a schema:
>
> items:
> maximum: 10 (or 255?)
>
> > +
> > + default-brightness:
> > + description:
> > + The default brightness (index into the levels array).
> > + $ref: /schemas/types.yaml#/definitions/uint32
>
> Already has a type. You need to reference backlight/common.yaml.
>
> > +
> > + mps,overvoltage-protection-microvolt:
> > + description: Overvoltage protection (13.5V, 24V or 35.5V).
> > + enum: [ 13500000, 24000000, 35500000 ]
> > + default: 35500000
> > +
> > + mps,no-sync-mode:
> > + description: disable synchronous rectification mode
> > + type: boolean
> > +
> > +required:
> > + - compatible
> > + - reg
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > + - |
> > + i2c {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + /* Backlight with PWM control */
> > + backlight_pwm: backlight@17 {
> > + compatible = "mps,mp3309c";
> > + reg = <0x17>;
> > + pwms = <&pwm1 0 3333333 0>; /* 300 Hz --> (1/f) * 1*10^9 */
> > + brightness-levels = <0 1 2 3 4 5 6 7 8 9 10>;
> > + default-brightness = <8>;
> > + mps,overvoltage-protection-microvolt = <24000000>;
> > + };
> > + };
> > --
> > 2.34.1
> >
Regards,
Flavio
^ permalink raw reply [flat|nested] 8+ messages in thread* RE: [PATCH v4 1/2] dt-bindings: backlight: Add MPS MP3309C
@ 2023-10-11 15:13 ` Flavio Suligoi
0 siblings, 0 replies; 8+ messages in thread
From: Flavio Suligoi @ 2023-10-11 15:13 UTC (permalink / raw)
To: Rob Herring
Cc: devicetree@vger.kernel.org, Daniel Thompson,
linux-kernel@vger.kernel.org, Pavel Machek, Jingoo Han,
Helge Deller, Lee Jones, Conor Dooley,
dri-devel@lists.freedesktop.org, linux-fbdev@vger.kernel.org,
Krzysztof Kozlowski, linux-leds@vger.kernel.org
Hi Rob,
just a question about led-backlight.yaml and pwm-backlight.yaml
common properties.
...
> > +
> > + brightness-levels:
> > + description:
> > + Array of distinct brightness levels, in PWM dimming mode.
> > + Typically these are in the range from 0 to 255, but any range starting
> > + at 0 will do.
> > + The 0 value means a 0% duty cycle (darkest/off), while the last value in
> > + the array represents a 100% duty cycle (brightest).
> > + $ref: /schemas/types.yaml#/definitions/uint32-array
>
> This already has a type defined. Please add it to backlight/common.yaml and
> remove from led-backlight.yaml and pwm-backlight.yaml.
As well as the brightness-levels property, also the default-brightness-level is in common
between led-backlight.yaml and pwm-backlight.yaml.
What do you think about removing it from both led-backlight.yaml and pwm-backlight.yaml, and
moving it into backlight/common.yaml?
>
> You say 0-255 here, but your example is 0-10. One of those seems wrong.
> Anyways, don't define constraints in prose, use a schema:
>
> items:
> maximum: 10 (or 255?)
>
> > +
> > + default-brightness:
> > + description:
> > + The default brightness (index into the levels array).
> > + $ref: /schemas/types.yaml#/definitions/uint32
>
> Already has a type. You need to reference backlight/common.yaml.
>
> > +
> > + mps,overvoltage-protection-microvolt:
> > + description: Overvoltage protection (13.5V, 24V or 35.5V).
> > + enum: [ 13500000, 24000000, 35500000 ]
> > + default: 35500000
> > +
> > + mps,no-sync-mode:
> > + description: disable synchronous rectification mode
> > + type: boolean
> > +
> > +required:
> > + - compatible
> > + - reg
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > + - |
> > + i2c {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + /* Backlight with PWM control */
> > + backlight_pwm: backlight@17 {
> > + compatible = "mps,mp3309c";
> > + reg = <0x17>;
> > + pwms = <&pwm1 0 3333333 0>; /* 300 Hz --> (1/f) * 1*10^9 */
> > + brightness-levels = <0 1 2 3 4 5 6 7 8 9 10>;
> > + default-brightness = <8>;
> > + mps,overvoltage-protection-microvolt = <24000000>;
> > + };
> > + };
> > --
> > 2.34.1
> >
Regards,
Flavio
^ permalink raw reply [flat|nested] 8+ messages in thread