From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org, akpm@linux-foundation.org,
torvalds@linux-foundation.org, stable@vger.kernel.org
Cc: lwn@lwn.net, jslaby@suse.cz,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: Linux 4.14.327
Date: Tue, 10 Oct 2023 22:03:39 +0200 [thread overview]
Message-ID: <2023101040-reattach-dubbed-fd03@gregkh> (raw)
I'm announcing the release of the 4.14.327 kernel.
All users of the 4.14 kernel series must upgrade.
The updated 4.14.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-4.14.y
and can be browsed at the normal kernel.org git web browser:
https://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary
thanks,
greg k-h
------------
Makefile | 2
arch/parisc/include/asm/ldcw.h | 36 ++-
arch/parisc/include/asm/ropes.h | 3
arch/parisc/include/asm/spinlock_types.h | 5
arch/parisc/kernel/irq.c | 2
arch/powerpc/perf/hv-24x7.c | 2
arch/xtensa/boot/Makefile | 3
arch/xtensa/boot/lib/zmem.c | 5
drivers/ata/ahci.c | 13 +
drivers/ata/ahci_xgene.c | 4
drivers/ata/libahci.c | 49 ++---
drivers/ata/libata-core.c | 58 ++++--
drivers/ata/libata-eh.c | 13 -
drivers/ata/libata-scsi.c | 2
drivers/base/regmap/regcache-rbtree.c | 3
drivers/char/agp/parisc-agp.c | 2
drivers/clk/tegra/clk-bpmp.c | 2
drivers/gpio/gpio-aspeed.c | 2
drivers/gpio/gpio-tb10x.c | 6
drivers/i2c/busses/i2c-i801.c | 1
drivers/i2c/muxes/i2c-demux-pinctrl.c | 4
drivers/infiniband/core/cma_configfs.c | 2
drivers/infiniband/hw/mlx4/sysfs.c | 2
drivers/infiniband/hw/mlx5/main.c | 2
drivers/media/dvb-frontends/sp8870.c | 2
drivers/media/tuners/tuner-xc2028.c | 2
drivers/mtd/ubi/build.c | 7
drivers/net/team/team.c | 10 -
drivers/net/usb/smsc75xx.c | 4
drivers/net/wan/fsl_ucc_hdlc.c | 12 +
drivers/net/wireless/marvell/mwifiex/11n_rxreorder.c | 4
drivers/net/wireless/marvell/mwifiex/sta_rx.c | 16 -
drivers/parisc/iosapic.c | 4
drivers/parisc/iosapic_private.h | 4
drivers/s390/scsi/zfcp_aux.c | 9
drivers/target/target_core_device.c | 11 -
drivers/tty/serial/8250/8250_port.c | 5
drivers/tty/vt/vc_screen.c | 11 -
drivers/video/fbdev/Kconfig | 2
drivers/watchdog/iTCO_wdt.c | 26 ++
drivers/xen/events/events_base.c | 92 +++++-----
drivers/xen/events/events_internal.h | 4
fs/binfmt_elf_fdpic.c | 5
fs/btrfs/super.c | 2
fs/ext4/namei.c | 26 +-
fs/nfs/flexfilelayout/flexfilelayout.c | 1
fs/nilfs2/gcinode.c | 6
include/linux/if_team.h | 2
include/linux/libata.h | 6
kernel/trace/ring_buffer.c | 2
net/core/rtnetlink.c | 12 -
net/dccp/ipv4.c | 9
net/dccp/ipv6.c | 9
net/ipv4/route.c | 4
net/ipv4/tcp_input.c | 13 +
net/l2tp/l2tp_ip6.c | 2
net/sched/sch_hfsc.c | 2
net/sctp/associola.c | 3
net/sctp/socket.c | 1
scripts/mod/file2alias.c | 2
tools/power/cpupower/Makefile | 8
tools/power/cpupower/bench/Makefile | 2
tools/testing/selftests/ftrace/test.d/instances/instance-event.tc | 2
63 files changed, 345 insertions(+), 222 deletions(-)
Alexandra Diupina (1):
drivers/net: process the result of hdlc_open() and add call of hdlc_close() in uhdlc_close()
Andy Shevchenko (1):
serial: 8250_port: Check IRQ data before use
Bartosz Golaszewski (1):
gpio: aspeed: fix the GPIO number passed to pinctrl_gpio_set_config()
Budimir Markovic (1):
net/sched: sch_hfsc: Ensure inner classes have fsc curve
Christophe JAILLET (2):
gpio: tb10x: Fix an error handling path in tb10x_gpio_probe()
IB/mlx4: Fix the size of a buffer in add_port_entries()
Damien Le Moal (2):
ata: libata-core: Fix ata_port_request_pm() locking
ata: libata-core: Fix port and device removal
David Howells (1):
ipv4, ipv6: Fix handling of transhdrlen in __ip{,6}_append_data()
Dinghao Liu (1):
scsi: zfcp: Fix a double put in zfcp_port_enqueue()
Eric Dumazet (1):
dccp: fix dccp_v4_err()/dccp_v6_err() again
George Kennedy (1):
vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF
Greg Kroah-Hartman (3):
media: dvb: symbol fixup for dvb_attach() - again
Revert "rtnetlink: Reject negative ifindexes in RTM_NEWLINK"
Linux 4.14.327
Greg Ungerer (1):
fs: binfmt_elf_efpic: fix personality for ELF-FDPIC
Gustavo A. R. Silva (1):
wifi: mwifiex: Fix tlv_buf_left calculation
Hannes Reinecke (1):
ata: ahci: Drop pointless VPRINTK() calls and convert the remaining ones
Heiner Kallweit (1):
i2c: i801: unregister tco_pdev in i801_probe() error path
Helge Deller (3):
parisc: sba: Fix compile warning wrt list of SBA devices
parisc: iosapic.c: Fix sparse warnings
parisc: irq: Make irq_stack_union static to avoid sparse warning
Ido Schimmel (1):
rtnetlink: Reject negative ifindexes in RTM_NEWLINK
Ivan Babrou (1):
cpupower: add Makefile dependencies for install targets
John David Anglin (1):
parisc: Restore __ldcw_align for PA-RISC 2.0 processors
Josef Bacik (1):
btrfs: properly report 0 avail for very full file systems
Juergen Gross (1):
xen/events: replace evtchn_rwlock with RCU
Junxiao Bi (1):
scsi: target: core: Fix deadlock due to recursive locking
Kajol Jain (1):
powerpc/perf/hv-24x7: Update domain value check
Kyle Zeng (1):
ipv4: fix null-deref in ipv4_link_failure
Leon Romanovsky (1):
RDMA/cma: Fix truncation compilation warning in make_cma_ports
Matthias Schiffer (1):
ata: libata-sata: increase PMP SRST timeout to 10s
Mauricio Faria de Oliveira (1):
modpost: add missing else to the "of" check
Max Filippov (1):
xtensa: boot/lib: fix function prototypes
Mika Westerberg (2):
watchdog: iTCO_wdt: No need to stop the timer in probe
watchdog: iTCO_wdt: Set NO_REBOOT if the watchdog is not already running
Neal Cardwell (1):
tcp: fix delayed ACKs for MSS boundary condition
Niklas Cassel (3):
ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()
ata: libata-scsi: ignore reserved bits for REPORT SUPPORTED OPERATION CODES
ata: libata: disallow dev-initiated LPM transitions to unsupported states
Pan Bian (1):
nilfs2: fix potential use after free in nilfs_gccache_submit_read_data()
Pin-yen Lin (1):
wifi: mwifiex: Fix oob check condition in mwifiex_process_rx_packet
Randy Dunlap (1):
xtensa: boot: don't add include-dirs
Richard Fitzgerald (1):
regmap: rbtree: Fix wrong register marked as in-cache when creating new node
Shay Drory (1):
RDMA/mlx5: Fix NULL string error
Shida Zhang (1):
ext4: fix rec_len verify error
Shigeru Yoshida (1):
net: usb: smsc75xx: Fix uninit-value access in __smsc75xx_read_reg
Szuying Chen (1):
ata: libahci: clear pending interrupt status
Thomas Zimmermann (1):
fbdev/sh7760fb: Depend on FB=y
Timo Alho (1):
clk: tegra: fix error return case for recalc_rate
Trond Myklebust (1):
NFS/pNFS: Report EINVAL errors from connect() to the server
Xiaoke Wang (1):
i2c: mux: demux-pinctrl: check the return value of devm_kstrdup()
Xin Long (2):
sctp: update transport state when processing a dupcook packet
sctp: update hb timer immediately after users change hb_interval
Zheng Yejian (2):
selftests/ftrace: Correctly enable event in instance-event.tc
ring-buffer: Avoid softlockup in ring_buffer_resize()
Zhihao Cheng (1):
ubi: Refuse attaching if mtd's erasesize is 0
Ziyang Xuan (1):
team: fix null-ptr-deref when team device type is changed
next reply other threads:[~2023-10-10 20:04 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-10 20:03 Greg Kroah-Hartman [this message]
2023-10-10 20:03 ` Linux 4.14.327 Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2023101040-reattach-dubbed-fd03@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=jslaby@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=lwn@lwn.net \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.