From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org, akpm@linux-foundation.org,
torvalds@linux-foundation.org, stable@vger.kernel.org
Cc: lwn@lwn.net, jslaby@suse.cz,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: Linux 4.19.296
Date: Tue, 10 Oct 2023 22:03:45 +0200 [thread overview]
Message-ID: <2023101045-knickers-preshow-9c49@gregkh> (raw)
I'm announcing the release of the 4.19.296 kernel.
All users of the 4.19 kernel series must upgrade.
The updated 4.19.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-4.19.y
and can be browsed at the normal kernel.org git web browser:
https://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary
thanks,
greg k-h
------------
Makefile | 2
arch/arm/boot/dts/omap4-droid4-xt894.dts | 4
arch/mips/alchemy/devboards/db1000.c | 4
arch/mips/alchemy/devboards/db1200.c | 6
arch/mips/alchemy/devboards/db1300.c | 4
arch/parisc/include/asm/ldcw.h | 36 +-
arch/parisc/include/asm/ropes.h | 3
arch/parisc/include/asm/spinlock_types.h | 5
arch/parisc/kernel/drivers.c | 2
arch/parisc/kernel/irq.c | 2
arch/powerpc/perf/hv-24x7.c | 2
drivers/ata/ahci.c | 13
drivers/ata/ahci_xgene.c | 4
drivers/ata/libahci.c | 49 +--
drivers/ata/libata-core.c | 60 +++-
drivers/ata/libata-eh.c | 13
drivers/ata/libata-scsi.c | 2
drivers/ata/libata-transport.c | 9
drivers/ata/libata.h | 2
drivers/base/arch_topology.c | 2
drivers/base/cacheinfo.c | 18 -
drivers/base/core.c | 8
drivers/base/cpu.c | 34 +-
drivers/base/firmware_loader/fallback.c | 2
drivers/base/memory.c | 24 -
drivers/base/node.c | 34 +-
drivers/base/platform.c | 2
drivers/base/power/sysfs.c | 50 +--
drivers/base/regmap/regcache-rbtree.c | 3
drivers/base/soc.c | 8
drivers/char/agp/parisc-agp.c | 2
drivers/clk/tegra/clk-bpmp.c | 2
drivers/gpio/gpio-aspeed.c | 2
drivers/gpio/gpio-pmic-eic-sprd.c | 1
drivers/gpio/gpio-pxa.c | 1
drivers/gpio/gpio-tb10x.c | 6
drivers/i2c/busses/i2c-i801.c | 1
drivers/i2c/muxes/i2c-demux-pinctrl.c | 4
drivers/infiniband/core/cma_configfs.c | 2
drivers/infiniband/hw/mlx4/sysfs.c | 2
drivers/infiniband/hw/mlx5/main.c | 2
drivers/input/serio/i8042-x86ia64io.h | 7
drivers/media/dvb-frontends/sp8870.c | 2
drivers/media/tuners/tuner-xc2028.c | 2
drivers/mtd/ubi/build.c | 7
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 5
drivers/net/ethernet/qlogic/qed/qed_ll2.h | 2
drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c | 7
drivers/net/team/team.c | 10
drivers/net/thunderbolt.c | 3
drivers/net/usb/smsc75xx.c | 4
drivers/net/wan/fsl_ucc_hdlc.c | 12
drivers/net/wireless/marvell/mwifiex/11n_rxreorder.c | 4
drivers/net/wireless/marvell/mwifiex/sta_rx.c | 16 -
drivers/nvme/host/pci.c | 2
drivers/parisc/iosapic.c | 4
drivers/parisc/iosapic_private.h | 4
drivers/pci/controller/dwc/pcie-qcom.c | 2
drivers/s390/scsi/zfcp_aux.c | 9
drivers/scsi/megaraid/megaraid_sas.h | 5
drivers/scsi/megaraid/megaraid_sas_base.c | 44 ++-
drivers/scsi/megaraid/megaraid_sas_fusion.c | 18 +
drivers/scsi/qla2xxx/qla_attr.c | 2
drivers/scsi/qla2xxx/qla_dbg.c | 2
drivers/scsi/qla2xxx/qla_os.c | 45 ++-
drivers/target/target_core_device.c | 11
drivers/tty/serial/8250/8250_port.c | 5
drivers/video/fbdev/Kconfig | 2
drivers/watchdog/iTCO_wdt.c | 26 +
drivers/xen/events/events_base.c | 85 +++---
drivers/xen/events/events_internal.h | 2
fs/binfmt_elf_fdpic.c | 5
fs/btrfs/super.c | 2
fs/ext4/ext4.h | 2
fs/ext4/mballoc.c | 138 +++++-----
fs/ext4/namei.c | 26 +
fs/nfs/flexfilelayout/flexfilelayout.c | 1
fs/nilfs2/gcinode.c | 6
include/linux/if_team.h | 2
include/linux/libata.h | 6
include/linux/netdevice.h | 58 ++--
include/net/dst.h | 5
include/net/tcp.h | 6
include/uapi/linux/bpf.h | 4
kernel/trace/ring_buffer.c | 2
net/bridge/br_forward.c | 4
net/bridge/br_input.c | 4
net/core/dev.c | 14 -
net/core/rtnetlink.c | 12
net/dccp/ipv4.c | 9
net/dccp/ipv6.c | 9
net/ipv4/route.c | 4
net/ipv4/tcp_input.c | 13
net/ipv4/tcp_output.c | 7
net/l2tp/l2tp_ip6.c | 2
net/netfilter/ipvs/ip_vs_sync.c | 4
net/netfilter/nf_tables_api.c | 9
net/rds/tcp_connect.c | 2
net/sctp/associola.c | 3
net/sctp/socket.c | 1
scripts/mod/file2alias.c | 2
security/smack/smack.h | 1
security/smack/smack_lsm.c | 65 +++-
sound/pci/hda/hda_intel.c | 1
tools/include/uapi/linux/bpf.h | 4
tools/power/cpupower/Makefile | 8
tools/power/cpupower/bench/Makefile | 2
tools/testing/selftests/ftrace/test.d/instances/instance-event.tc | 2
tools/testing/selftests/net/tls.c | 11
109 files changed, 747 insertions(+), 490 deletions(-)
Alexandra Diupina (1):
drivers/net: process the result of hdlc_open() and add call of hdlc_close() in uhdlc_close()
Andy Shevchenko (1):
serial: 8250_port: Check IRQ data before use
Bartosz Golaszewski (1):
gpio: aspeed: fix the GPIO number passed to pinctrl_gpio_set_config()
Ben Wolsieffer (1):
net: stmmac: dwmac-stm32: fix resume on STM32 MCU
Christoph Hellwig (1):
MIPS: Alchemy: only build mmc support helpers if au1xmmc is enabled
Christophe JAILLET (2):
gpio: tb10x: Fix an error handling path in tb10x_gpio_probe()
IB/mlx4: Fix the size of a buffer in add_port_entries()
Damien Le Moal (3):
ata: libata-core: Fix ata_port_request_pm() locking
ata: libata-core: Fix port and device removal
ata: libata-core: Do not register PM operations for SAS ports
David Howells (1):
ipv4, ipv6: Fix handling of transhdrlen in __ip{,6}_append_data()
Dinghao Liu (1):
scsi: zfcp: Fix a double put in zfcp_port_enqueue()
Dmitry Monakhov (1):
ext4: mark group as trimmed only if it was fully scanned
Duje Mihanović (1):
gpio: pxa: disable pinctrl calls for MMP_GPIO
Eric Dumazet (3):
net: add atomic_long_t to net_device_stats fields
net: bridge: use DEV_STATS_INC()
dccp: fix dccp_v4_err()/dccp_v6_err() again
Felix Riemann (1):
net: Fix unwanted sign extension in netdev_stats_to_stats64()
Greg Kroah-Hartman (5):
Revert "drivers core: Use sysfs_emit and sysfs_emit_at for show(device *...) functions"
media: dvb: symbol fixup for dvb_attach() - again
Revert "PCI: qcom: Disable write access to read only registers for IP v2.3.3"
Revert "rtnetlink: Reject negative ifindexes in RTM_NEWLINK"
Linux 4.19.296
Greg Ungerer (1):
fs: binfmt_elf_efpic: fix personality for ELF-FDPIC
Gustavo A. R. Silva (2):
qed/red_ll2: Fix undefined behavior bug in struct qed_ll2_info
wifi: mwifiex: Fix tlv_buf_left calculation
Hannes Reinecke (1):
ata: ahci: Drop pointless VPRINTK() calls and convert the remaining ones
Heiner Kallweit (1):
i2c: i801: unregister tco_pdev in i801_probe() error path
Helge Deller (4):
parisc: sba: Fix compile warning wrt list of SBA devices
parisc: iosapic.c: Fix sparse warnings
parisc: drivers: Fix sparse warning
parisc: irq: Make irq_stack_union static to avoid sparse warning
Ido Schimmel (1):
rtnetlink: Reject negative ifindexes in RTM_NEWLINK
Ivan Babrou (1):
cpupower: add Makefile dependencies for install targets
Jan Kara (2):
ext4: move setting of trimmed bit into ext4_try_to_trim_range()
ext4: do not let fstrim block system suspend
Jie Wang (1):
net: hns3: add 5ms delay before clear firmware reset irq source
John David Anglin (1):
parisc: Restore __ldcw_align for PA-RISC 2.0 processors
Jordan Rife (1):
net: replace calls to sock->ops->connect() with kernel_connect()
Josef Bacik (1):
btrfs: properly report 0 avail for very full file systems
Juergen Gross (1):
xen/events: replace evtchn_rwlock with RCU
Junxiao Bi (2):
scsi: megaraid_sas: Fix deadlock on firmware crashdump
scsi: target: core: Fix deadlock due to recursive locking
Kailang Yang (1):
ALSA: hda: Disable power save for solving pop issue on Lenovo ThinkCentre M70q
Kajol Jain (1):
powerpc/perf/hv-24x7: Update domain value check
Kees Cook (1):
selftests/tls: Add {} to avoid static checker warning
Kemeng Shi (1):
ext4: replace the traditional ternary conditional operator with with max()/min()
Kyle Zeng (1):
ipv4: fix null-deref in ipv4_link_failure
Leon Romanovsky (1):
RDMA/cma: Fix truncation compilation warning in make_cma_ports
Lukas Bulwahn (1):
ext4: scope ret locally in ext4_try_to_trim_range()
Lukas Czerner (1):
ext4: change s_last_trim_minblks type to unsigned long
Manish Rangankar (1):
scsi: qla2xxx: Remove unsupported ql2xenabledif option
Martin K. Petersen (1):
scsi: qla2xxx: Add protection mask module parameters
Matthias Schiffer (1):
ata: libata-sata: increase PMP SRST timeout to 10s
Mauricio Faria de Oliveira (1):
modpost: add missing else to the "of" check
Mika Westerberg (3):
watchdog: iTCO_wdt: No need to stop the timer in probe
watchdog: iTCO_wdt: Set NO_REBOOT if the watchdog is not already running
net: thunderbolt: Fix TCPv6 GSO checksum calculation
Neal Cardwell (2):
tcp: fix quick-ack counting to count actual ACKs of new data
tcp: fix delayed ACKs for MSS boundary condition
Niklas Cassel (3):
ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()
ata: libata-scsi: ignore reserved bits for REPORT SUPPORTED OPERATION CODES
ata: libata: disallow dev-initiated LPM transitions to unsupported states
Pablo Neira Ayuso (1):
netfilter: nf_tables: disallow element removal on anonymous sets
Pan Bian (1):
nilfs2: fix potential use after free in nilfs_gccache_submit_read_data()
Pin-yen Lin (1):
wifi: mwifiex: Fix oob check condition in mwifiex_process_rx_packet
Pratyush Yadav (1):
nvme-pci: do not set the NUMA node of device if it has none
Richard Fitzgerald (1):
regmap: rbtree: Fix wrong register marked as in-cache when creating new node
Roberto Sassu (2):
smack: Retrieve transmuting information in smack_inode_getsecurity()
smack: Record transmuting in smk_transmuted
Sabrina Dubroca (1):
selftests: tls: swap the TX and RX sockets in some tests
Shay Drory (1):
RDMA/mlx5: Fix NULL string error
Shida Zhang (1):
ext4: fix rec_len verify error
Shigeru Yoshida (1):
net: usb: smsc75xx: Fix uninit-value access in __smsc75xx_read_reg
Shivasharan S (2):
scsi: megaraid_sas: Load balance completions across all MSI-X
scsi: megaraid_sas: Enable msix_load_balance for Invader and later controllers
Stanislav Fomichev (1):
bpf: Clarify error expectations from bpf_clone_redirect
Szuying Chen (1):
ata: libahci: clear pending interrupt status
Thomas Zimmermann (1):
fbdev/sh7760fb: Depend on FB=y
Timo Alho (1):
clk: tegra: fix error return case for recalc_rate
Tony Lindgren (1):
ARM: dts: ti: omap: motorola-mapphone: Fix abe_clkctrl warning on boot
Trond Myklebust (1):
NFS/pNFS: Report EINVAL errors from connect() to the server
Vishal Goel (1):
Smack:- Use overlay inode label in smack_inode_copy_up()
Wang Jianchao (2):
ext4: remove the 'group' parameter of ext4_trim_extent
ext4: add new helper interface ext4_try_to_trim_range()
Wenhua Lin (1):
gpio: pmic-eic-sprd: Add can_sleep flag for PMIC EIC chip
Werner Sembach (1):
Input: i8042 - add quirk for TUXEDO Gemini 17 Gen1/Clevo PD70PN
Xiaoke Wang (1):
i2c: mux: demux-pinctrl: check the return value of devm_kstrdup()
Xin Long (2):
sctp: update transport state when processing a dupcook packet
sctp: update hb timer immediately after users change hb_interval
Zheng Yejian (2):
selftests/ftrace: Correctly enable event in instance-event.tc
ring-buffer: Avoid softlockup in ring_buffer_resize()
Zhihao Cheng (1):
ubi: Refuse attaching if mtd's erasesize is 0
Ziyang Xuan (1):
team: fix null-ptr-deref when team device type is changed
next reply other threads:[~2023-10-10 20:04 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-10 20:03 Greg Kroah-Hartman [this message]
2023-10-10 20:03 ` Linux 4.19.296 Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2023101045-knickers-preshow-9c49@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=jslaby@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=lwn@lwn.net \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.