From: Nicholas Piggin <npiggin@gmail.com>
To: netdev@vger.kernel.org
Cc: Nicholas Piggin <npiggin@gmail.com>,
dev@openvswitch.org, Pravin B Shelar <pshelar@ovn.org>,
Aaron Conole <aconole@redhat.com>,
"Eelco Chaudron" <echaudro@redhat.com>,
"Ilya Maximets" <imaximet@redhat.com>,
"Flavio Leitner" <fbl@redhat.com>,
Ilya Maximets <i.maximets@ovn.org>
Subject: [PATCH 3/7] openvswitch: reduce stack usage in do_execute_actions
Date: Wed, 11 Oct 2023 13:43:40 +1000 [thread overview]
Message-ID: <20231011034344.104398-4-npiggin@gmail.com> (raw)
In-Reply-To: <20231011034344.104398-1-npiggin@gmail.com>
From: Ilya Maximets <i.maximets@ovn.org>
do_execute_actions() function can be called recursively multiple
times while executing actions that require pipeline forking or
recirculations. It may also be re-entered multiple times if the packet
leaves openvswitch module and re-enters it through a different port.
Currently, there is a 256-byte array allocated on stack in this
function that is supposed to hold NSH header. Compilers tend to
pre-allocate that space right at the beginning of the function:
a88: 48 81 ec b0 01 00 00 sub $0x1b0,%rsp
NSH is not a very common protocol, but the space is allocated on every
recursive call or re-entry multiplying the wasted stack space.
Move the stack allocation to push_nsh() function that is only used
if NSH actions are actually present. push_nsh() is also a simple
function without a possibility for re-entry, so the stack is returned
right away.
With this change the preallocated space is reduced by 256 B per call:
b18: 48 81 ec b0 00 00 00 sub $0xb0,%rsp
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
---
net/openvswitch/actions.c | 23 +++++++++++------------
1 file changed, 11 insertions(+), 12 deletions(-)
diff --git a/net/openvswitch/actions.c b/net/openvswitch/actions.c
index 7a66574672d3..be15ef693284 100644
--- a/net/openvswitch/actions.c
+++ b/net/openvswitch/actions.c
@@ -349,11 +349,18 @@ static int push_eth(struct sk_buff *skb, struct sw_flow_key *key,
return 0;
}
-static int push_nsh(struct sk_buff *skb, struct sw_flow_key *key,
- const struct nshhdr *nh)
+static noinline_for_stack int push_nsh(struct sk_buff *skb,
+ struct sw_flow_key *key,
+ const struct nlattr *a)
{
+ u8 buffer[NSH_HDR_MAX_LEN];
+ struct nshhdr *nh = (struct nshhdr *)buffer;
int err;
+ err = nsh_hdr_from_nlattr(a, nh, NSH_HDR_MAX_LEN);
+ if (err)
+ return err;
+
err = nsh_push(skb, nh);
if (err)
return err;
@@ -1477,17 +1484,9 @@ static int do_execute_actions(struct datapath *dp, struct sk_buff *skb,
err = pop_eth(skb, key);
break;
- case OVS_ACTION_ATTR_PUSH_NSH: {
- u8 buffer[NSH_HDR_MAX_LEN];
- struct nshhdr *nh = (struct nshhdr *)buffer;
-
- err = nsh_hdr_from_nlattr(nla_data(a), nh,
- NSH_HDR_MAX_LEN);
- if (unlikely(err))
- break;
- err = push_nsh(skb, key, nh);
+ case OVS_ACTION_ATTR_PUSH_NSH:
+ err = push_nsh(skb, key, nla_data(a));
break;
- }
case OVS_ACTION_ATTR_POP_NSH:
err = pop_nsh(skb, key);
--
2.42.0
next prev parent reply other threads:[~2023-10-11 3:44 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-11 3:43 [PATCH 0/7] net: openvswitch: Reduce stack usage Nicholas Piggin
2023-10-11 3:43 ` [PATCH 1/7] net: openvswitch: generalise the per-cpu flow key allocation stack Nicholas Piggin
2023-10-11 3:43 ` [PATCH 2/7] net: openvswitch: Use flow key allocator in ovs_vport_receive Nicholas Piggin
2023-10-11 3:43 ` Nicholas Piggin [this message]
2023-10-11 3:43 ` [PATCH 4/7] net: openvswitch: Reduce push_nsh stack usage Nicholas Piggin
2023-10-11 3:43 ` [PATCH 5/7] net: openvswitch: uninline action execution Nicholas Piggin
2023-10-11 3:43 ` [PATCH 6/7] net: openvswitch: uninline ovs_fragment to control stack usage Nicholas Piggin
2023-10-11 3:43 ` [PATCH 7/7] net: openvswitch: Reduce stack usage in ovs_dp_process_packet Nicholas Piggin
2023-10-11 12:22 ` [PATCH 0/7] net: openvswitch: Reduce stack usage Ilya Maximets
2023-10-12 0:08 ` Nicholas Piggin
2023-10-11 13:23 ` Aaron Conole
2023-10-12 1:19 ` Nicholas Piggin
2023-10-13 8:27 ` David Laight
2023-10-20 17:04 ` Aaron Conole
2023-10-25 4:06 ` Nicholas Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231011034344.104398-4-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=aconole@redhat.com \
--cc=dev@openvswitch.org \
--cc=echaudro@redhat.com \
--cc=fbl@redhat.com \
--cc=i.maximets@ovn.org \
--cc=imaximet@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=pshelar@ovn.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.