From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org, p.raghav@samsung.com,
konishi.ryusuke@gmail.com, agruenba@redhat.com,
willy@infradead.org, akpm@linux-foundation.org
Subject: + gfs2-convert-gfs2_getjdatabuf-to-use-a-folio.patch added to mm-unstable branch
Date: Mon, 16 Oct 2023 15:10:58 -0700 [thread overview]
Message-ID: <20231016221058.E185BC433C9@smtp.kernel.org> (raw)
The patch titled
Subject: gfs2: convert gfs2_getjdatabuf to use a folio
has been added to the -mm mm-unstable branch. Its filename is
gfs2-convert-gfs2_getjdatabuf-to-use-a-folio.patch
This patch will shortly appear at
https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patches/gfs2-convert-gfs2_getjdatabuf-to-use-a-folio.patch
This patch will later appear in the mm-unstable branch at
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/process/submit-checklist.rst when testing your code ***
The -mm tree is included into linux-next via the mm-everything
branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
and is updated there every 2-3 working days
------------------------------------------------------
From: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Subject: gfs2: convert gfs2_getjdatabuf to use a folio
Date: Mon, 16 Oct 2023 21:10:55 +0100
Use the folio APIs, saving four hidden calls to compound_head().
Link: https://lkml.kernel.org/r/20231016201114.1928083-9-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
fs/gfs2/meta_io.c | 22 ++++++++--------------
1 file changed, 8 insertions(+), 14 deletions(-)
--- a/fs/gfs2/meta_io.c~gfs2-convert-gfs2_getjdatabuf-to-use-a-folio
+++ a/fs/gfs2/meta_io.c
@@ -400,26 +400,20 @@ static struct buffer_head *gfs2_getjdata
{
struct address_space *mapping = ip->i_inode.i_mapping;
struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
- struct page *page;
+ struct folio *folio;
struct buffer_head *bh;
unsigned int shift = PAGE_SHIFT - sdp->sd_sb.sb_bsize_shift;
unsigned long index = blkno >> shift; /* convert block to page */
unsigned int bufnum = blkno - (index << shift);
- page = find_get_page_flags(mapping, index, FGP_LOCK|FGP_ACCESSED);
- if (!page)
+ folio = __filemap_get_folio(mapping, index, FGP_LOCK | FGP_ACCESSED, 0);
+ if (IS_ERR(folio))
return NULL;
- if (!page_has_buffers(page)) {
- unlock_page(page);
- put_page(page);
- return NULL;
- }
- /* Locate header for our buffer within our page */
- for (bh = page_buffers(page); bufnum--; bh = bh->b_this_page)
- /* Do nothing */;
- get_bh(bh);
- unlock_page(page);
- put_page(page);
+ bh = folio_buffers(folio);
+ if (bh)
+ bh = get_nth_bh(bh, bufnum);
+ folio_unlock(folio);
+ folio_put(folio);
return bh;
}
_
Patches currently in -mm which might be from willy@infradead.org are
mm-make-lock_folio_maybe_drop_mmap-vma-lock-aware.patch
mm-call-wp_page_copy-under-the-vma-lock.patch
mm-handle-shared-faults-under-the-vma-lock.patch
mm-handle-cow-faults-under-the-vma-lock.patch
mm-handle-read-faults-under-the-vma-lock.patch
mm-handle-write-faults-to-ro-pages-under-the-vma-lock.patch
iomap-hold-state_lock-over-call-to-ifs_set_range_uptodate.patch
iomap-protect-read_bytes_pending-with-the-state_lock.patch
mm-add-folio_end_read.patch
ext4-use-folio_end_read.patch
buffer-use-folio_end_read.patch
iomap-use-folio_end_read.patch
bitops-add-xor_unlock_is_negative_byte.patch
alpha-implement-xor_unlock_is_negative_byte.patch
m68k-implement-xor_unlock_is_negative_byte.patch
mips-implement-xor_unlock_is_negative_byte.patch
powerpc-implement-arch_xor_unlock_is_negative_byte-on-32-bit.patch
riscv-implement-xor_unlock_is_negative_byte.patch
s390-implement-arch_xor_unlock_is_negative_byte.patch
mm-delete-checks-for-xor_unlock_is_negative_byte.patch
mm-add-folio_xor_flags_has_waiters.patch
mm-make-__end_folio_writeback-return-void.patch
mm-use-folio_xor_flags_has_waiters-in-folio_end_writeback.patch
filemap-remove-use-of-wait-bookmarks.patch
sched-remove-wait-bookmarks.patch
buffer-return-bool-from-grow_dev_folio.patch
buffer-make-folio_create_empty_buffers-return-a-buffer_head.patch
mpage-convert-map_buffer_to_folio-to-folio_create_empty_buffers.patch
ext4-convert-to-folio_create_empty_buffers.patch
buffer-add-get_nth_bh.patch
gfs2-convert-inode-unstuffing-to-use-a-folio.patch
gfs2-convert-gfs2_getbuf-to-folios.patch
gfs2-convert-gfs2_getjdatabuf-to-use-a-folio.patch
gfs2-convert-gfs2_write_buf_to_page-to-use-a-folio.patch
nilfs2-convert-nilfs_mdt_freeze_buffer-to-use-a-folio.patch
nilfs2-convert-nilfs_grab_buffer-to-use-a-folio.patch
nilfs2-convert-nilfs_copy_page-to-nilfs_copy_folio.patch
nilfs2-convert-nilfs_mdt_forget_block-to-use-a-folio.patch
nilfs2-convert-nilfs_mdt_get_frozen_buffer-to-use-a-folio.patch
nilfs2-remove-nilfs_page_get_nth_block.patch
nilfs2-convert-nilfs_lookup_dirty_data_buffers-to-use-folio_create_empty_buffers.patch
ntfs-convert-ntfs_read_block-to-use-a-folio.patch
ntfs-convert-ntfs_writepage-to-use-a-folio.patch
ntfs-convert-ntfs_prepare_pages_for_non_resident_write-to-folios.patch
ntfs3-convert-ntfs_zero_range-to-use-a-folio.patch
ocfs2-convert-ocfs2_map_page_blocks-to-use-a-folio.patch
reiserfs-convert-writepage-to-use-a-folio.patch
ufs-add-ufs_get_locked_folio-and-ufs_put_locked_folio.patch
ufs-use-ufs_get_locked_folio-in-ufs_alloc_lastblock.patch
ufs-convert-ufs_change_blocknr-to-use-folios.patch
ufs-remove-ufs_get_locked_page.patch
buffer-remove-folio_create_empty_buffers.patch
reply other threads:[~2023-10-16 22:11 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231016221058.E185BC433C9@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=agruenba@redhat.com \
--cc=konishi.ryusuke@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mm-commits@vger.kernel.org \
--cc=p.raghav@samsung.com \
--cc=willy@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.