All of lore.kernel.org
 help / color / mirror / Atom feed
From: "David E. Box" <david.e.box@linux.intel.com>
To: linux-kernel@vger.kernel.org,
	platform-driver-x86@vger.kernel.org,
	ilpo.jarvinen@linux.intel.com, rajvi.jingar@linux.intel.com
Subject: [PATCH V4 08/17] platform/x86:intel/pmc: Call pmc_get_low_power_modes from platform init
Date: Wed, 18 Oct 2023 16:16:15 -0700	[thread overview]
Message-ID: <20231018231624.1044633-9-david.e.box@linux.intel.com> (raw)
In-Reply-To: <20231018231624.1044633-1-david.e.box@linux.intel.com>

From: Xi Pardee <xi.pardee@intel.com>

In order to setup a table of low power mode requirements for Meteor Lake,
pmc_core_get_low_power_modes() will need to be run from platform init code
so that the enabled modes are known, allowing the use of the
pmc_for_each_mode helper. Make the function global and call it from the
platform init code.

Signed-off-by: Xi Pardee <xi.pardee@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
V4 - No change

V3 - No change

V2 - Added clearer explanation for the change in the changelog

 drivers/platform/x86/intel/pmc/adl.c  |  2 ++
 drivers/platform/x86/intel/pmc/cnp.c  |  2 ++
 drivers/platform/x86/intel/pmc/core.c |  7 +++----
 drivers/platform/x86/intel/pmc/core.h |  1 +
 drivers/platform/x86/intel/pmc/icl.c  | 10 +++++++++-
 drivers/platform/x86/intel/pmc/mtl.c  |  4 +++-
 drivers/platform/x86/intel/pmc/spt.c  | 10 +++++++++-
 drivers/platform/x86/intel/pmc/tgl.c  |  1 +
 8 files changed, 30 insertions(+), 7 deletions(-)

diff --git a/drivers/platform/x86/intel/pmc/adl.c b/drivers/platform/x86/intel/pmc/adl.c
index 5006008e01be..64c492391ede 100644
--- a/drivers/platform/x86/intel/pmc/adl.c
+++ b/drivers/platform/x86/intel/pmc/adl.c
@@ -319,6 +319,8 @@ int adl_core_init(struct pmc_dev *pmcdev)
 	if (ret)
 		return ret;
 
+	pmc_core_get_low_power_modes(pmcdev);
+
 	/* Due to a hardware limitation, the GBE LTR blocks PC10
 	 * when a cable is attached. Tell the PMC to ignore it.
 	 */
diff --git a/drivers/platform/x86/intel/pmc/cnp.c b/drivers/platform/x86/intel/pmc/cnp.c
index 420aaa1d7c76..59298f184d0e 100644
--- a/drivers/platform/x86/intel/pmc/cnp.c
+++ b/drivers/platform/x86/intel/pmc/cnp.c
@@ -214,6 +214,8 @@ int cnp_core_init(struct pmc_dev *pmcdev)
 	if (ret)
 		return ret;
 
+	pmc_core_get_low_power_modes(pmcdev);
+
 	/* Due to a hardware limitation, the GBE LTR blocks PC10
 	 * when a cable is attached. Tell the PMC to ignore it.
 	 */
diff --git a/drivers/platform/x86/intel/pmc/core.c b/drivers/platform/x86/intel/pmc/core.c
index 84c175b9721a..3894119d61b0 100644
--- a/drivers/platform/x86/intel/pmc/core.c
+++ b/drivers/platform/x86/intel/pmc/core.c
@@ -966,9 +966,8 @@ static bool pmc_core_pri_verify(u32 lpm_pri, u8 *mode_order)
 	return true;
 }
 
-static void pmc_core_get_low_power_modes(struct platform_device *pdev)
+void pmc_core_get_low_power_modes(struct pmc_dev *pmcdev)
 {
-	struct pmc_dev *pmcdev = platform_get_drvdata(pdev);
 	struct pmc *pmc = pmcdev->pmcs[PMC_IDX_MAIN];
 	u8 pri_order[LPM_MAX_NUM_MODES] = LPM_DEFAULT_PRI;
 	u8 mode_order[LPM_MAX_NUM_MODES];
@@ -1000,7 +999,8 @@ static void pmc_core_get_low_power_modes(struct platform_device *pdev)
 		for (mode = 0; mode < LPM_MAX_NUM_MODES; mode++)
 			pri_order[mode_order[mode]] = mode;
 	else
-		dev_warn(&pdev->dev, "Assuming a default substate order for this platform\n");
+		dev_warn(&pmcdev->pdev->dev,
+			 "Assuming a default substate order for this platform\n");
 
 	/*
 	 * Loop through all modes from lowest to highest priority,
@@ -1250,7 +1250,6 @@ static int pmc_core_probe(struct platform_device *pdev)
 	}
 
 	pmcdev->pmc_xram_read_bit = pmc_core_check_read_lock_bit(primary_pmc);
-	pmc_core_get_low_power_modes(pdev);
 	pmc_core_do_dmi_quirks(primary_pmc);
 
 	pmc_core_dbgfs_register(pmcdev);
diff --git a/drivers/platform/x86/intel/pmc/core.h b/drivers/platform/x86/intel/pmc/core.h
index 0729f593c6a7..ccf24e0f5e50 100644
--- a/drivers/platform/x86/intel/pmc/core.h
+++ b/drivers/platform/x86/intel/pmc/core.h
@@ -490,6 +490,7 @@ extern int pmc_core_send_ltr_ignore(struct pmc_dev *pmcdev, u32 value);
 
 int pmc_core_resume_common(struct pmc_dev *pmcdev);
 int get_primary_reg_base(struct pmc *pmc);
+extern void pmc_core_get_low_power_modes(struct pmc_dev *pmcdev);
 
 extern void pmc_core_ssram_init(struct pmc_dev *pmcdev);
 
diff --git a/drivers/platform/x86/intel/pmc/icl.c b/drivers/platform/x86/intel/pmc/icl.c
index d08e3174230d..71b0fd6cb7d8 100644
--- a/drivers/platform/x86/intel/pmc/icl.c
+++ b/drivers/platform/x86/intel/pmc/icl.c
@@ -53,7 +53,15 @@ const struct pmc_reg_map icl_reg_map = {
 int icl_core_init(struct pmc_dev *pmcdev)
 {
 	struct pmc *pmc = pmcdev->pmcs[PMC_IDX_MAIN];
+	int ret;
 
 	pmc->map = &icl_reg_map;
-	return get_primary_reg_base(pmc);
+
+	ret = get_primary_reg_base(pmc);
+	if (ret)
+		return ret;
+
+	pmc_core_get_low_power_modes(pmcdev);
+
+	return ret;
 }
diff --git a/drivers/platform/x86/intel/pmc/mtl.c b/drivers/platform/x86/intel/pmc/mtl.c
index 2204bc666980..c3b5f4fe01d1 100644
--- a/drivers/platform/x86/intel/pmc/mtl.c
+++ b/drivers/platform/x86/intel/pmc/mtl.c
@@ -985,7 +985,7 @@ static int mtl_resume(struct pmc_dev *pmcdev)
 int mtl_core_init(struct pmc_dev *pmcdev)
 {
 	struct pmc *pmc = pmcdev->pmcs[PMC_IDX_SOC];
-	int ret = 0;
+	int ret;
 
 	mtl_d3_fixup();
 
@@ -1002,6 +1002,8 @@ int mtl_core_init(struct pmc_dev *pmcdev)
 			return ret;
 	}
 
+	pmc_core_get_low_power_modes(pmcdev);
+
 	/* Due to a hardware limitation, the GBE LTR blocks PC10
 	 * when a cable is attached. Tell the PMC to ignore it.
 	 */
diff --git a/drivers/platform/x86/intel/pmc/spt.c b/drivers/platform/x86/intel/pmc/spt.c
index 4b6f5cbda16c..ab993a69e33e 100644
--- a/drivers/platform/x86/intel/pmc/spt.c
+++ b/drivers/platform/x86/intel/pmc/spt.c
@@ -137,7 +137,15 @@ const struct pmc_reg_map spt_reg_map = {
 int spt_core_init(struct pmc_dev *pmcdev)
 {
 	struct pmc *pmc = pmcdev->pmcs[PMC_IDX_MAIN];
+	int ret;
 
 	pmc->map = &spt_reg_map;
-	return get_primary_reg_base(pmc);
+
+	ret = get_primary_reg_base(pmc);
+	if (ret)
+		return ret;
+
+	pmc_core_get_low_power_modes(pmcdev);
+
+	return ret;
 }
diff --git a/drivers/platform/x86/intel/pmc/tgl.c b/drivers/platform/x86/intel/pmc/tgl.c
index 2449940102db..d5f1d2223c5a 100644
--- a/drivers/platform/x86/intel/pmc/tgl.c
+++ b/drivers/platform/x86/intel/pmc/tgl.c
@@ -263,6 +263,7 @@ int tgl_core_init(struct pmc_dev *pmcdev)
 	if (ret)
 		return ret;
 
+	pmc_core_get_low_power_modes(pmcdev);
 	pmc_core_get_tgl_lpm_reqs(pmcdev->pdev);
 	/* Due to a hardware limitation, the GBE LTR blocks PC10
 	 * when a cable is attached. Tell the PMC to ignore it.
-- 
2.34.1


  parent reply	other threads:[~2023-10-18 23:16 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-18 23:16 [PATCH V4 00/17] intel_pmc: Add telemetry API to read counters David E. Box
2023-10-18 23:16 ` [PATCH V4 01/17] platform/x86/intel/vsec: Move structures to header David E. Box
2023-10-18 23:16 ` [PATCH V4 02/17] platform/x86/intel/vsec: remove platform_info from vsec device structure David E. Box
2023-10-18 23:16 ` [PATCH V4 03/17] platform/x86/intel/vsec: Use cleanup.h David E. Box
2023-10-19  1:03   ` kernel test robot
2023-10-23 15:15   ` Ilpo Järvinen
2023-10-18 23:16 ` [PATCH V4 04/17] platform/x86/intel/vsec: Add intel_vsec_register David E. Box
2023-10-23 15:21   ` Ilpo Järvinen
2023-10-24 23:25     ` David E. Box
2023-10-18 23:16 ` [PATCH V4 05/17] platform/x86/intel/vsec: Add base address field David E. Box
2023-10-18 23:16 ` [PATCH V4 06/17] platform/x86/intel/pmt: Add header to struct intel_pmt_entry David E. Box
2023-10-23 15:14   ` Ilpo Järvinen
2023-10-18 23:16 ` [PATCH V4 07/17] platform/x86/intel/pmt: telemetry: Export API to read telemetry David E. Box
2023-10-18 23:16 ` David E. Box [this message]
2023-10-18 23:16 ` [PATCH V4 09/17] platform/x86/intel/pmc: Allow pmc_core_ssram_init to fail David E. Box
2023-10-23 15:17   ` Ilpo Järvinen
2023-10-18 23:16 ` [PATCH V4 10/17] linux/io.h: iounmap/ioport_unmap cleanup.h support David E. Box
2023-10-19  2:12   ` kernel test robot
2023-10-19  2:23   ` kernel test robot
2023-10-23 15:25   ` Ilpo Järvinen
2023-10-18 23:16 ` [PATCH V4 11/17] platform/x86/intel/pmc: Split pmc_core_ssram_get_pmc() David E. Box
2023-10-19  1:35   ` kernel test robot
2023-10-23 16:01   ` Ilpo Järvinen
2023-10-18 23:16 ` [PATCH V4 12/17] platform/x86/intel/pmc: Find and register PMC telemetry entries David E. Box
2023-10-18 23:16 ` [PATCH V4 13/17] platform/x86/intel/pmc: Display LPM requirements for multiple PMCs David E. Box
2023-10-23 16:15   ` Ilpo Järvinen
2023-10-18 23:16 ` [PATCH V4 14/17] platform/x86/intel/pmc: Retrieve LPM information using Intel PMT David E. Box
2023-10-23 16:19   ` Ilpo Järvinen
2023-10-18 23:16 ` [PATCH V4 15/17] platform/x86/intel/pmc: Read low power mode requirements for MTL-M and MTL-P David E. Box
2023-10-18 23:16 ` [PATCH V4 16/17] platform/x86/intel/pmc: Add debug attribute for Die C6 counter David E. Box
2023-10-23 16:31   ` Ilpo Järvinen
2023-10-26 20:28     ` David E. Box
2023-10-18 23:16 ` [PATCH V4 17/17] platform/x86/intel/pmc: Show Die C6 counter on Meteor Lake David E. Box
2023-10-23 16:33   ` Ilpo Järvinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231018231624.1044633-9-david.e.box@linux.intel.com \
    --to=david.e.box@linux.intel.com \
    --cc=ilpo.jarvinen@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=rajvi.jingar@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.