From: deller@kernel.org
To: Stefan Hajnoczi <stefanha@gmail.com>, qemu-devel@nongnu.org
Cc: Helge Deller <deller@gmx.de>,
Richard Henderson <richard.henderson@linaro.org>
Subject: [PULL 08/11] hw/hppa: Export machine name, BTLBs, power-button address via fw_cfg
Date: Fri, 20 Oct 2023 00:52:54 +0200 [thread overview]
Message-ID: <20231019225257.383071-9-deller@kernel.org> (raw)
In-Reply-To: <20231019225257.383071-1-deller@kernel.org>
From: Helge Deller <deller@gmx.de>
Provide necessary info to SeaBIOS-hppa.
Signed-off-by: Helge Deller <deller@gmx.de>
---
hw/hppa/machine.c | 22 +++++++++++++++++++---
1 file changed, 19 insertions(+), 3 deletions(-)
diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
index c6d8deffcf..de925259ea 100644
--- a/hw/hppa/machine.c
+++ b/hw/hppa/machine.c
@@ -118,11 +118,13 @@ static void fw_cfg_boot_set(void *opaque, const char *boot_device,
fw_cfg_modify_i16(opaque, FW_CFG_BOOT_DEVICE, boot_device[0]);
}
-static FWCfgState *create_fw_cfg(MachineState *ms)
+static FWCfgState *create_fw_cfg(MachineState *ms, PCIBus *pci_bus)
{
FWCfgState *fw_cfg;
uint64_t val;
const char qemu_version[] = QEMU_VERSION;
+ MachineClass *mc = MACHINE_GET_CLASS(ms);
+ int len;
fw_cfg = fw_cfg_init_mem(FW_CFG_IO_BASE, FW_CFG_IO_BASE + 4);
fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, ms->smp.cpus);
@@ -137,8 +139,20 @@ static FWCfgState *create_fw_cfg(MachineState *ms)
fw_cfg_add_file(fw_cfg, "/etc/cpu/tlb_entries",
g_memdup(&val, sizeof(val)), sizeof(val));
+ val = cpu_to_le64(HPPA_BTLB_ENTRIES);
+ fw_cfg_add_file(fw_cfg, "/etc/cpu/btlb_entries",
+ g_memdup(&val, sizeof(val)), sizeof(val));
+
+ len = strlen(mc->name) + 1;
+ fw_cfg_add_file(fw_cfg, "/etc/hppa/machine",
+ g_memdup(mc->name, len), len);
+
val = cpu_to_le64(HPA_POWER_BUTTON);
- fw_cfg_add_file(fw_cfg, "/etc/power-button-addr",
+ fw_cfg_add_file(fw_cfg, "/etc/hppa/power-button-addr",
+ g_memdup(&val, sizeof(val)), sizeof(val));
+
+ val = cpu_to_le64(CPU_HPA + 24);
+ fw_cfg_add_file(fw_cfg, "/etc/hppa/DebugOutputPort",
g_memdup(&val, sizeof(val)), sizeof(val));
fw_cfg_add_i16(fw_cfg, FW_CFG_BOOT_DEVICE, ms->boot_config.order[0]);
@@ -148,6 +162,8 @@ static FWCfgState *create_fw_cfg(MachineState *ms)
g_memdup(qemu_version, sizeof(qemu_version)),
sizeof(qemu_version));
+ fw_cfg_add_extra_pci_roots(pci_bus, fw_cfg);
+
return fw_cfg;
}
@@ -250,7 +266,7 @@ static void machine_hppa_init(MachineState *machine)
parallel_hds[0]);
/* fw_cfg configuration interface */
- create_fw_cfg(machine);
+ create_fw_cfg(machine, pci_bus);
/* SCSI disk setup. */
dev = DEVICE(pci_create_simple(pci_bus, -1, "lsi53c895a"));
--
2.41.0
next prev parent reply other threads:[~2023-10-19 22:55 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-19 22:52 [PULL 00/11] C3700 patches deller
2023-10-19 22:52 ` [PULL 01/11] target/hppa: Update to SeaBIOS-hppa version 10 deller
2023-10-19 22:52 ` [PULL 02/11] hw/hppa: Require at least " deller
2023-10-19 22:52 ` [PULL 03/11] pci_ids/tulip: Add PCI vendor ID for HP and use it in tulip deller
2023-10-19 22:52 ` [PULL 04/11] lasips2: LASI PS/2 devices are not user-createable deller
2023-10-19 22:52 ` [PULL 05/11] hw/pci-host: Add Astro system bus adapter found on PA-RISC machines deller
2023-10-19 22:52 ` [PULL 06/11] pci-host: Wire up new Astro/Elroy PCI bridge deller
2023-10-19 22:52 ` [PULL 07/11] MAINTAINERS: Update HP-PARISC entries deller
2023-10-19 22:52 ` deller [this message]
2023-10-19 22:52 ` [PULL 09/11] hw/hppa: Provide RTC and DebugOutputPort on CPU #0 deller
2023-10-19 22:52 ` [PULL 10/11] hw/hppa: Split out machine creation deller
2023-10-19 22:52 ` [PULL 11/11] hw/hppa: Add new HP C3700 machine deller
2023-10-20 16:07 ` [PULL 00/11] C3700 patches Stefan Hajnoczi
-- strict thread matches above, loose matches on Subject: below --
2023-10-18 20:40 deller
2023-10-18 20:40 ` [PULL 08/11] hw/hppa: Export machine name, BTLBs, power-button address via fw_cfg deller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231019225257.383071-9-deller@kernel.org \
--to=deller@kernel.org \
--cc=deller@gmx.de \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=stefanha@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.