All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
To: "Nuno Sá" <noname.nuno@gmail.com>
Cc: David Lechner <dlechner@baylibre.com>,
	Jonathan Cameron <jic23@kernel.org>, <linux-iio@vger.kernel.org>,
	Peter Zijlstra <peterz@infradead.org>,
	Cosmin Tanislav <demonsingur@gmail.com>,
	"Jagath Jog J" <jagathjog1996@gmail.com>,
	Gwendal Grignou <gwendal@chromium.org>,
	"Daniel Campello" <campello@chromium.org>,
	<gregkh@linuxfoundation.org>
Subject: Re: [RFC PATCH 1/8] iio: locking: introduce __cleanup() based direct mode claiming infrastructure
Date: Tue, 24 Oct 2023 13:23:12 +0100	[thread overview]
Message-ID: <20231024132312.0000614c@Huawei.com> (raw)
In-Reply-To: <25cb785485ae585923b7b81276e10d8c048ba850.camel@gmail.com>

On Mon, 23 Oct 2023 16:58:48 +0200
Nuno Sá <noname.nuno@gmail.com> wrote:

> On Mon, 2023-10-23 at 15:34 +0100, Jonathan Cameron wrote:
> > On Mon, 23 Oct 2023 13:51:04 +0200
> > Nuno Sá <noname.nuno@gmail.com> wrote:
> >   
> > > On Mon, 2023-10-23 at 10:53 +0100, Jonathan Cameron wrote:  
> > > > On Mon, 23 Oct 2023 10:55:56 +0200
> > > > Nuno Sá <noname.nuno@gmail.com> wrote:
> > > >     
> > > > > On Sun, 2023-10-22 at 16:10 -0500, David Lechner wrote:    
> > > > > > On Sun, Oct 22, 2023 at 10:47 AM Jonathan Cameron <jic23@kernel.org>
> > > > > > wrote:      
> > > > > > > 
> > > > > > > From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> > > > > > > 
> > > > > > > Allows use of:
> > > > > > > 
> > > > > > >         CLASS(iio_claim_direct, claimed_dev)(indio_dev);
> > > > > > >         if (IS_ERR(claimed_dev))
> > > > > > >                 return PTR_ERR(claimed_dev);
> > > > > > > 
> > > > > > >         st = iio_priv(claimed_dev);
> > > > > > > 
> > > > > > > to automatically call iio_device_release_direct_mode() based on
> > > > > > > scope.
> > > > > > > Typically seen in combination with local device specific locks which
> > > > > > > are already have automated cleanup options via guard(mutex)(&st-  
> > > > > > > >lock)  
> > > > > > > and scoped_guard().  Using both together allows most error handling
> > > > > > > to
> > > > > > > be automated.
> > > > > > > 
> > > > > > > Note that whilst this pattern results in a struct iio_dev
> > > > > > > *claimed_dev
> > > > > > > that can be used, it is not necessary to do so as long as that
> > > > > > > pointer
> > > > > > > has been checked for errors as in the example.
> > > > > > > 
> > > > > > > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> > > > > > > ---
> > > > > > >  drivers/iio/industrialio-core.c |  4 ++++
> > > > > > >  include/linux/iio/iio.h         | 25 +++++++++++++++++++++++++
> > > > > > >  2 files changed, 29 insertions(+)
> > > > > > > 
> > > > > > > diff --git a/drivers/iio/industrialio-core.c
> > > > > > > b/drivers/iio/industrialio-
> > > > > > > core.c
> > > > > > > index c77745b594bd..93bfad105eb5 100644
> > > > > > > --- a/drivers/iio/industrialio-core.c
> > > > > > > +++ b/drivers/iio/industrialio-core.c
> > > > > > > @@ -2065,6 +2065,10 @@
> > > > > > > EXPORT_SYMBOL_GPL(iio_device_claim_direct_mode);
> > > > > > >   */
> > > > > > >  void iio_device_release_direct_mode(struct iio_dev *indio_dev)
> > > > > > >  {
> > > > > > > +       /* Auto cleanup can result in this being called with an
> > > > > > > ERR_PTR
> > > > > > > */
> > > > > > > +       if (IS_ERR(indio_dev))
> > > > > > > +               return;
> > > > > > > +
> > > > > > >         mutex_unlock(&to_iio_dev_opaque(indio_dev)->mlock);
> > > > > > >  }
> > > > > > >  EXPORT_SYMBOL_GPL(iio_device_release_direct_mode);
> > > > > > > diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h
> > > > > > > index d0ce3b71106a..11c42170fda1 100644
> > > > > > > --- a/include/linux/iio/iio.h
> > > > > > > +++ b/include/linux/iio/iio.h
> > > > > > > @@ -9,6 +9,7 @@
> > > > > > > 
> > > > > > >  #include <linux/device.h>
> > > > > > >  #include <linux/cdev.h>
> > > > > > > +#include <linux/cleanup.h>
> > > > > > >  #include <linux/slab.h>
> > > > > > >  #include <linux/iio/types.h>
> > > > > > >  /* IIO TODO LIST */
> > > > > > > @@ -644,6 +645,30 @@ int __devm_iio_device_register(struct device
> > > > > > > *dev,
> > > > > > > struct iio_dev *indio_dev,
> > > > > > >  int iio_push_event(struct iio_dev *indio_dev, u64 ev_code, s64
> > > > > > > timestamp);
> > > > > > >  int iio_device_claim_direct_mode(struct iio_dev *indio_dev);
> > > > > > >  void iio_device_release_direct_mode(struct iio_dev *indio_dev);
> > > > > > > +/*
> > > > > > > + * Auto cleanup version of iio_device_claim_direct_mode,
> > > > > > > + *
> > > > > > > + *     CLASS(iio_claim_direct, claimed_dev)(indio_dev);
> > > > > > > + *     if (IS_ERR(claimed_dev))
> > > > > > > + *             return PTR_ERR(claimed_dev);
> > > > > > > + *
> > > > > > > + *     st = iio_priv(claimed_dev);
> > > > > > > + *     ....
> > > > > > > + */
> > > > > > > +DEFINE_CLASS(iio_claim_direct, struct iio_dev *,
> > > > > > > +            iio_device_release_direct_mode(_T),
> > > > > > > +            ({
> > > > > > > +                       struct iio_dev *dev;
> > > > > > > +                       int d = iio_device_claim_direct_mode(_T);
> > > > > > > +
> > > > > > > +                       if (d < 0)
> > > > > > > +                               dev = ERR_PTR(d);
> > > > > > > +                       else
> > > > > > > +                               dev = _T;
> > > > > > > +                       dev;
> > > > > > > +            }),
> > > > > > > +            struct iio_dev *_T);
> > > > > > > +
> > > > > > >  int iio_device_claim_buffer_mode(struct iio_dev *indio_dev);
> > > > > > >  void iio_device_release_buffer_mode(struct iio_dev *indio_dev);
> > > > > > > 
> > > > > > > --
> > > > > > > 2.42.0
> > > > > > >       
> > > > > > 
> > > > > > What is the benefit of exposing `claimed_dev` rather than just the int
> > > > > > return value? It seems like it just makes more noise in the error
> > > > > > check.
> > > > > >       
> > > > > 
> > > > > I don't really have a very strong opinion on this but what I really
> > > > > don't
> > > > > like
> > > > > much is the pattern:
> > > > > 
> > > > > CLASS(type, ret), where the return value is an argument of the macro...
> > > > > It
> > > > > would
> > > > > be nice if we could just make it like:
> > > > > 
> > > > > ret = guard(type)(...); //or any other variation of the guard() macro
> > > > > if (ret) 
> > > > > 	return ret;
> > > > > 
> > > > > the above could also be an error pointer or even have one variation of
> > > > > each.
> > > > > but
> > > > > yeah, that likely means changing the cleanup.h file and that might be
> > > > > out of
> > > > > scope for Jonathan's patch series. 
> > > > >     
> > > > 
> > > > I fully agree it's ugly and a little unintuitive but I don't see a way an
> > > > "lvalue"
> > > > can work work cleanly (due to magic types under the hood) and I suspect we
> > > > will
> > > > have to get used to this pattern.
> > > >     
> > > 
> > > Yeah, given the games being played with the constructor and the _lock
> > > definition
> > > so we return the variable we want to "release" I agree it would be hard to
> > > have
> > > anything clean and likely even harder to read (more than it is already :)).
> > > 
> > > However, I think users of the cleanup.h stuff could build on top of it...
> > > For
> > > instance, in our case we could have something like:
> > > 
> > > #define IIO_CLAIM_DIRECT(dev) 
> > > 	int __ret = 0;
> > > 	CLASS(iio_claim_direct, claimed_dev)(dev);
> > > 	if ((IS_ERR(claimed_dev))
> > > 		__ret = PTR_ERR(claimed_dev);
> > > 	__ret  
> > 
> > Maybe, but we'll have to deal with people perpetually trying to brackets
> > around
> > the complex macro... 
> > 
> >   
> 
> Not sure what you mean here... you mean dealing with people coming up with funny
> new macros around CLASS(). In IIO, this is very specific and If I'm not missing
> anything the obvious, the above macro with give the same usage as 
> iio_device_claim_direct_mode() but without caring about release() - so not sure
> people could be that creative :)
Checkpatch will warn something along the lines of complex macros should be contained
in brackets / or do while()

So the class would go out of scope and be freed at the end of the macro :)

> 
> Anyways, as I started to say in my first reply, I don't feel strong about this
> at all, so feel free to add:
> 
> Reviewed-by: Nuno Sa <nuno.sa@analog.com>

Thanks,

I'm not going to rush with this set anyway given merge window about to open
However I do have a few long flights coming up so might use it in a lot more
drivers for v2.

Jonathan


> 
> 
> 


  reply	other threads:[~2023-10-24 12:23 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-22 15:47 [RFC PATCH 0/8] IIO: Use the new cleanup.h magic Jonathan Cameron
2023-10-22 15:47 ` [RFC PATCH 1/8] iio: locking: introduce __cleanup() based direct mode claiming infrastructure Jonathan Cameron
2023-10-22 21:10   ` David Lechner
2023-10-23  8:55     ` Nuno Sá
2023-10-23  9:53       ` Jonathan Cameron
2023-10-23 11:51         ` Nuno Sá
2023-10-23 14:34           ` Jonathan Cameron
2023-10-23 14:58             ` Nuno Sá
2023-10-24 12:23               ` Jonathan Cameron [this message]
2023-10-25  7:24                 ` Nuno Sá
2023-10-24 15:11       ` Peter Zijlstra
2023-10-24 15:28         ` Peter Zijlstra
2023-10-28 16:59           ` Jonathan Cameron
2023-11-02 10:48             ` Peter Zijlstra
2023-11-03 15:19               ` Jonathan Cameron
2023-10-23  9:49     ` Jonathan Cameron
2023-10-22 15:47 ` [RFC PATCH 2/8] iio: dummy: Add use of new automated cleanup of locks and direct mode claiming Jonathan Cameron
2023-10-22 15:47 ` [RFC PATCH 3/8] iio: accel: adxl367: Use automated cleanup for locks and iio direct mode Jonathan Cameron
2023-10-22 15:47 ` [RFC PATCH 4/8] iio: imu: bmi323: Use cleanup handling for iio_device_claim_direct_mode() Jonathan Cameron
2023-10-22 15:47 ` [RFC PATCH 5/8] iio: adc: max1363: Use automatic cleanup for locks and iio mode claiming Jonathan Cameron
2023-10-22 15:47 ` [RFC PATCH 6/8] iio: proximity: sx9360: Use automated cleanup for locks and IIO " Jonathan Cameron
2023-10-22 15:47 ` [RFC PATCH 7/8] iio: proximity: sx9324: " Jonathan Cameron
2023-10-22 15:47 ` [RFC PATCH 8/8] iio: proximity: sx9310: " Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231024132312.0000614c@Huawei.com \
    --to=jonathan.cameron@huawei.com \
    --cc=campello@chromium.org \
    --cc=demonsingur@gmail.com \
    --cc=dlechner@baylibre.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=gwendal@chromium.org \
    --cc=jagathjog1996@gmail.com \
    --cc=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=noname.nuno@gmail.com \
    --cc=peterz@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.