[Accel-config] [PATCH v1 1/2] accel-config/test: Add parameter for specifying dev and wq

All of lore.kernel.org
 help / color / mirror / Atom feed

From: Rex Zhang <rex.zhang@intel.com>
To: fenghua.yu@intel.com, ramesh.thomas@intel.com,
	rex.zhang@intel.com, tony.zhu@intel.com,
	accel-config@lists.linuxfoundation.org
Subject: [Accel-config] [PATCH v1 1/2] accel-config/test: Add parameter for specifying dev and wq
Date: Wed, 25 Oct 2023 16:52:58 +0800	[thread overview]
Message-ID: <20231025085259.2958695-1-rex.zhang@intel.com> (raw)

About the script iaa_user_test_runner.sh, previously, the only one behavior
is to enable dev and wq firstly than invoke iaa_test, then the iaa_test
will find which dev and wq are enabled automatically.
For enabling the dev and wq outside the script, the script indentify the
enabled dev and wq, then pass the dev and wq into iaa_test as a parameter.

Signed-off-by: Rex Zhang <rex.zhang@intel.com>
---
 test/iaa_user_test_runner.sh | 149 +++++++++++++++++++----------------
 1 file changed, 83 insertions(+), 66 deletions(-)

diff --git a/test/iaa_user_test_runner.sh b/test/iaa_user_test_runner.sh
index e3a6663..d85d043 100755
--- a/test/iaa_user_test_runner.sh
+++ b/test/iaa_user_test_runner.sh
@@ -6,7 +6,18 @@
 
 rc="$EXIT_SKIP"
 
-IAA=iax1
+DEV_OPT=""
+input1=$1
+if [ "$input1" == "--skip-config" ]; then
+	DEV=`ls /dev/iax/ | sed -ne 's|wq\([^.]\+\)\(.*\)|iax\1/wq\1\2|p'`
+	DEV=`echo $DEV | cut -f1 -d' '`
+	IAA=`echo $DEV | cut -f1 -d/`
+	DEV_OPT="-d $DEV"
+	echo "$DEV"
+else
+	IAA=iax1
+fi
+echo "$IAA"
 WQ0=wq1.4
 WQ1=wq1.1
 DBDF=`ls -l /sys/bus/dsa/devices/iax3 | awk -F '/' '{print $(NF - 1)}'`
@@ -149,10 +160,10 @@ test_op()
 			if [ "$extra_flag" != "" ]
 			then
 				"$IAATEST" -w "$wq_mode_code" -l "$xfer_size" -o "$opcode" \
-					-f "$flag" -1 "$extra_flag" -t 5000 -v
+					-f "$flag" -1 "$extra_flag" -t 5000 -v $DEV_OPT
 			else
 				"$IAATEST" -w "$wq_mode_code" -l "$xfer_size" -o "$opcode" \
-					-f "$flag" -t 5000 -v
+					-f "$flag" -t 5000 -v $DEV_OPT
 			fi
 		done
 	done
@@ -169,133 +180,133 @@ test_op_filter()
 
 		if [ $((IAA_OPCODE_MASK_SCAN & OP_CAP2)) -ne 0 ]; then
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 512 -2 0x7c \
-				-3 128 -o $IAA_OPCODE_SCAN -t 5000 -v
+				-3 128 -o $IAA_OPCODE_SCAN -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 1024 -2 0x7c \
-				-3 256 -o $IAA_OPCODE_SCAN -t 5000 -v
+				-3 256 -o $IAA_OPCODE_SCAN -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 4096 -2 0x7c \
-				-3 1024 -o $IAA_OPCODE_SCAN -t 5000 -v
+				-3 1024 -o $IAA_OPCODE_SCAN -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 65536 -2 0x7c \
-				-3 16384 -o $IAA_OPCODE_SCAN -t 5000 -v
+				-3 16384 -o $IAA_OPCODE_SCAN -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 1048576 -2 0x7c \
-				-3 262144 -o $IAA_OPCODE_SCAN -t 5000 -v
+				-3 262144 -o $IAA_OPCODE_SCAN -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 2097152 -2 0x7c \
-				-3 524288 -o $IAA_OPCODE_SCAN -t 5000 -v
+				-3 524288 -o $IAA_OPCODE_SCAN -t 5000 -v $DEV_OPT
 		fi
 
 		if [ $((IAA_OPCODE_MASK_SET_MEMBERSHIP & OP_CAP2)) -ne 0 ]; then
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 512 -2 0x38 \
-				-3 256 -o $IAA_OPCODE_SET_MEMBERSHIP -t 5000 -v
+				-3 256 -o $IAA_OPCODE_SET_MEMBERSHIP -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 1024 -2 0x38 \
-				-3 512 -o $IAA_OPCODE_SET_MEMBERSHIP -t 5000 -v
+				-3 512 -o $IAA_OPCODE_SET_MEMBERSHIP -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 4096 -2 0x38 \
-				-3 2048 -o $IAA_OPCODE_SET_MEMBERSHIP -t 5000 -v
+				-3 2048 -o $IAA_OPCODE_SET_MEMBERSHIP -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 65536 -2 0x38 \
-				-3 32768 -o $IAA_OPCODE_SET_MEMBERSHIP -t 5000 -v
+				-3 32768 -o $IAA_OPCODE_SET_MEMBERSHIP -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 1048576 -2 0x38 \
-				-3 524288 -o $IAA_OPCODE_SET_MEMBERSHIP -t 5000 -v
+				-3 524288 -o $IAA_OPCODE_SET_MEMBERSHIP -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 2097152 -2 0x38 \
-				-3 1048576 -o $IAA_OPCODE_SET_MEMBERSHIP -t 5000 -v
+				-3 1048576 -o $IAA_OPCODE_SET_MEMBERSHIP -t 5000 -v $DEV_OPT
 		fi
 
 		if [ $((IAA_OPCODE_MASK_EXTRACT & OP_CAP2)) -ne 0 ]; then
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 512 -2 0x7c \
-				-3 128 -o $IAA_OPCODE_EXTRACT -t 5000 -v
+				-3 128 -o $IAA_OPCODE_EXTRACT -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 1024 -2 0x7c \
-				-3 256 -o $IAA_OPCODE_EXTRACT -t 5000 -v
+				-3 256 -o $IAA_OPCODE_EXTRACT -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 4096 -2 0x7c \
-				-3 1024 -o $IAA_OPCODE_EXTRACT -t 5000 -v
+				-3 1024 -o $IAA_OPCODE_EXTRACT -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 65536 -2 0x7c \
-				-3 16384 -o $IAA_OPCODE_EXTRACT -t 5000 -v
+				-3 16384 -o $IAA_OPCODE_EXTRACT -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 1048576 -2 0x7c \
-				-3 262144 -o $IAA_OPCODE_EXTRACT -t 5000 -v
+				-3 262144 -o $IAA_OPCODE_EXTRACT -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 2097152 -2 0x7c \
-				-3 524288 -o $IAA_OPCODE_EXTRACT -t 5000 -v
+				-3 524288 -o $IAA_OPCODE_EXTRACT -t 5000 -v $DEV_OPT
 		fi
 
 		if [ $((IAA_OPCODE_MASK_SELECT & OP_CAP2)) -ne 0 ]; then
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 512 -2 0x7c \
-				-3 128 -o $IAA_OPCODE_SELECT -t 5000 -v
+				-3 128 -o $IAA_OPCODE_SELECT -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 1024 -2 0x7c \
-				-3 256 -o $IAA_OPCODE_SELECT -t 5000 -v
+				-3 256 -o $IAA_OPCODE_SELECT -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 4096 -2 0x7c \
-				-3 1024 -o $IAA_OPCODE_SELECT -t 5000 -v
+				-3 1024 -o $IAA_OPCODE_SELECT -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 65536 -2 0x7c \
-				-3 16384 -o $IAA_OPCODE_SELECT -t 5000 -v
+				-3 16384 -o $IAA_OPCODE_SELECT -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 1048576 -2 0x7c \
-				-3 262144 -o $IAA_OPCODE_SELECT -t 5000 -v
+				-3 262144 -o $IAA_OPCODE_SELECT -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 2097152 -2 0x7c \
-				-3 524288 -o $IAA_OPCODE_SELECT -t 5000 -v
+				-3 524288 -o $IAA_OPCODE_SELECT -t 5000 -v $DEV_OPT
 		fi
 
 		if [ $((IAA_OPCODE_MASK_RLE_BURST & OP_CAP2)) -ne 0 ]; then
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 512 -2 0x1c \
-				-3 512 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+				-3 512 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 1024 -2 0x1c \
-				-3 1024 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+				-3 1024 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 4096 -2 0x1c \
-				-3 4096 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+				-3 4096 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 32768 -2 0x1c \
-				-3 32768 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+				-3 32768 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 65536 -2 0x1c \
-				-3 65536 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+				-3 65536 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 131072 -2 0x1c \
-				-3 131072 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+				-3 131072 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
 
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 32 -2 0x3c \
-				-3 16 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+				-3 16 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 64 -2 0x3c \
-				-3 32 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+				-3 32 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 128 -2 0x3c \
-				-3 64 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+				-3 64 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 256 -2 0x3c \
-				-3 128 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+				-3 128 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 512 -2 0x3c \
-				-3 256 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+				-3 256 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 1024 -2 0x3c \
-				-3 512 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+				-3 512 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
 
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 64 -2 0x7c \
-				-3 16 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+				-3 16 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 128 -2 0x7c \
-				-3 32 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+				-3 32 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 256 -2 0x7c \
-				-3 64 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+				-3 64 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 512 -2 0x7c \
-				-3 128 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+				-3 128 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 1024 -2 0x7c \
-				-3 256 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+				-3 256 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 2048 -2 0x7c \
-				-3 512 -o $IAA_OPCODE_RLE_BURST -t 5000 -v
+				-3 512 -o $IAA_OPCODE_RLE_BURST -t 5000 -v $DEV_OPT
 		fi
 
 		if [ $((IAA_OPCODE_MASK_FIND_UNIQUE & OP_CAP2)) -ne 0 ]; then
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 512 -2 0x38 \
-				-3 256 -o $IAA_OPCODE_FIND_UNIQUE -t 5000 -v
+				-3 256 -o $IAA_OPCODE_FIND_UNIQUE -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 1024 -2 0x38 \
-				-3 512 -o $IAA_OPCODE_FIND_UNIQUE -t 5000 -v
+				-3 512 -o $IAA_OPCODE_FIND_UNIQUE -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 4096 -2 0x38 \
-				-3 2048 -o $IAA_OPCODE_FIND_UNIQUE -t 5000 -v
+				-3 2048 -o $IAA_OPCODE_FIND_UNIQUE -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 65536 -2 0x38 \
-				-3 32768 -o $IAA_OPCODE_FIND_UNIQUE -t 5000 -v
+				-3 32768 -o $IAA_OPCODE_FIND_UNIQUE -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 1048576 -2 0x38 \
-				-3 524288 -o $IAA_OPCODE_FIND_UNIQUE -t 5000 -v
+				-3 524288 -o $IAA_OPCODE_FIND_UNIQUE -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 2097152 -2 0x38 \
-				-3 1048576 -o $IAA_OPCODE_FIND_UNIQUE -t 5000 -v
+				-3 1048576 -o $IAA_OPCODE_FIND_UNIQUE -t 5000 -v $DEV_OPT
 		fi
 
 		if [ $((IAA_OPCODE_MASK_EXPAND & OP_CAP2)) -ne 0 ]; then
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 512 -2 0x7c \
-				-3 128 -o $IAA_OPCODE_EXPAND -t 5000 -v
+				-3 128 -o $IAA_OPCODE_EXPAND -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 1024 -2 0x7c \
-				-3 256 -o $IAA_OPCODE_EXPAND -t 5000 -v
+				-3 256 -o $IAA_OPCODE_EXPAND -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 4096 -2 0x7c \
-				-3 1024 -o $IAA_OPCODE_EXPAND -t 5000 -v
+				-3 1024 -o $IAA_OPCODE_EXPAND -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 65536 -2 0x7c \
-				-3 16384 -o $IAA_OPCODE_EXPAND -t 5000 -v
+				-3 16384 -o $IAA_OPCODE_EXPAND -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 1048576 -2 0x7c \
-				-3 262144 -o $IAA_OPCODE_EXPAND -t 5000 -v
+				-3 262144 -o $IAA_OPCODE_EXPAND -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -f "$flag" -l 2097152 -2 0x7c \
-				-3 524288 -o $IAA_OPCODE_EXPAND -t 5000 -v
+				-3 524288 -o $IAA_OPCODE_EXPAND -t 5000 -v $DEV_OPT
 		fi
 	done
 }
@@ -317,7 +328,7 @@ test_op_crypto()
 			echo "Testing $xfer_size bytes"
 
 			"$IAATEST" -w "$wq_mode_code" -l "$xfer_size" -o "$opcode" \
-				-f "$flag" -a "$aecs_flag" -t 5000 -v
+				-f "$flag" -a "$aecs_flag" -t 5000 -v $DEV_OPT
 		done
 	done
 }
@@ -338,16 +349,19 @@ test_op_transl_fetch()
 			echo "Testing $xfer_size bytes"
 
 			"$IAATEST" -w "$wq_mode_code" -l "$xfer_size" -o "$opcode" \
-				-f "$flag" -m 0 -t 5000 -v
+				-f "$flag" -m 0 -t 5000 -v $DEV_OPT
 			"$IAATEST" -w "$wq_mode_code" -l "$xfer_size" -o "$opcode" \
-				-f "$flag" -m 1 -t 5000 -v
+				-f "$flag" -m 1 -t 5000 -v $DEV_OPT
 		done
 	done
 }
 
-_cleanup
-start_iaa
-enable_wqs
+if [ "$input1" != "--skip-config" ]; then
+	_cleanup
+	start_iaa
+	enable_wqs
+fi
+
 # shellcheck disable=SC2034
 rc="$EXIT_FAILURE"
 
@@ -499,7 +513,10 @@ if [ $((IAA_OPCODE_MASK_TRANSL_FETCH & OP_CAP0)) -ne 0 ]; then
 	unbind_vfio
 fi
 
-disable_wqs
-stop_iaa
-_cleanup
+if [ "$input1" != "--skip-config" ]; then
+	disable_wqs
+	stop_iaa
+	_cleanup
+fi
+
 exit 0
-- 
2.39.3

next             reply	other threads:[~2023-10-25  8:53 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-25  8:52 Rex Zhang [this message]
2023-10-25  8:52 ` [Accel-config] [PATCH v1 2/2] accel-config/test: Fix bug about checking result of decompression Rex Zhang

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:e3a6663 dfblob:d85d043 )
 OR (
bs:"[Accel-config] [PATCH v1 1/2] accel-config/test: Add parameter for specifying dev and wq" )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231025085259.2958695-1-rex.zhang@intel.com \
    --to=rex.zhang@intel.com \
    --cc=accel-config@lists.linuxfoundation.org \
    --cc=fenghua.yu@intel.com \
    --cc=ramesh.thomas@intel.com \
    --cc=tony.zhu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.