From: <marius.cristea@microchip.com>
To: <jic23@kernel.org>, <lars@metafoo.de>, <robh+dt@kernel.org>
Cc: <krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>,
<linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <marius.cristea@microchip.com>
Subject: [PATCH v2 1/2] dt-bindings: iio: adc: adding dt-bindings for PAC193X
Date: Wed, 25 Oct 2023 16:44:03 +0300 [thread overview]
Message-ID: <20231025134404.131485-2-marius.cristea@microchip.com> (raw)
In-Reply-To: <20231025134404.131485-1-marius.cristea@microchip.com>
From: Marius Cristea <marius.cristea@microchip.com>
This is the device tree schema for iio driver for
Microchip PAC193X series of Power Monitors with Accumulator.
Signed-off-by: Marius Cristea <marius.cristea@microchip.com>
---
.../bindings/iio/adc/microchip,pac1934.yaml | 146 ++++++++++++++++++
1 file changed, 146 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml
new file mode 100644
index 000000000000..837053ed8a71
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/microchip,pac1934.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PAC1934 Power Monitors with Accumulator
+
+maintainers:
+ - Marius Cristea <marius.cristea@microchip.com>
+
+description: |
+ Bindings for the Microchip family of Power Monitors with Accumulator.
+ The datasheet for PAC1931, PAC1932, PAC1933 and PAC1934 can be found here:
+ https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/PAC1931-Family-Data-Sheet-DS20005850E.pdf
+
+properties:
+ compatible:
+ enum:
+ - microchip,pac1931
+ - microchip,pac1932
+ - microchip,pac1933
+ - microchip,pac1934
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ interrupts:
+ description: IRQ line of the ADC
+ maxItems: 1
+
+ drive-open-drain:
+ description: The IRQ signal is configured as open-drain.
+ type: boolean
+ maxItems: 1
+
+ microchip,slow-io:
+ type: boolean
+ description: |
+ A GPIO used to trigger a change is sampling rate (lowering the chip power consumption).
+ In default mode, if this pin is forced high, sampling rate is forced to eight
+ samples/second. When it is forced low, the sampling rate is 1024 samples/second unless
+ a different sample rate has been programmed.
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+
+patternProperties:
+ "^channel@[1-4]+$":
+ type: object
+ $ref: adc.yaml
+ description: Represents the external channels which are connected to the ADC.
+
+ properties:
+ reg:
+ description: |
+ The channel number.
+ It can have up to 4 channels, numbered from 1 to 4.
+ items:
+ - minimum: 1
+ maximum: 4
+
+ shunt-resistor-micro-ohms:
+ description: |
+ Value in micro Ohms of the shunt resistor connected between
+ the SENSE+ and SENSE- inputs, across which the current is measured. Value
+ is needed to compute the scaling of the measured current.
+
+ label:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: Name of the monitored power rail.
+
+ bipolar:
+ description: Whether the channel is bi-directional.
+ type: boolean
+
+ required:
+ - reg
+ - shunt-resistor-micro-ohms
+
+ additionalProperties: false
+
+allOf:
+ - if:
+ required:
+ - interrupts
+ then:
+ required:
+ - drive-open-drain
+ else:
+ properties:
+ drive-open-drain: false
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pac193x: pac193x@10 {
+ compatible = "microchip,pac1934";
+ reg = <0x10>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@1 {
+ reg = <0x1>;
+ shunt-resistor-micro-ohms = <24900000>;
+ label = "CPU";
+ };
+
+ channel@2 {
+ reg = <0x2>;
+ shunt-resistor-micro-ohms = <49900000>;
+ label = "GPU";
+ };
+
+ channel@3 {
+ reg = <0x3>;
+ shunt-resistor-micro-ohms = <75000000>;
+ label = "MEM";
+ bipolar;
+ };
+
+ channel@4 {
+ reg = <0x4>;
+ shunt-resistor-micro-ohms = <100000000>;
+ label = "NET";
+ bipolar;
+ };
+ };
+ };
+
+...
--
2.34.1
next prev parent reply other threads:[~2023-10-25 13:44 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-25 13:44 [PATCH v2 0/2] adding support for Microchip PAC193X Power Monitor marius.cristea
2023-10-25 13:44 ` marius.cristea [this message]
2023-10-25 15:08 ` [PATCH v2 1/2] dt-bindings: iio: adc: adding dt-bindings for PAC193X Conor Dooley
2023-10-26 15:23 ` Marius.Cristea
2023-10-26 16:08 ` Conor Dooley
2023-10-27 14:26 ` Jonathan Cameron
2023-11-07 8:55 ` Marius.Cristea
2023-12-04 9:41 ` Jonathan Cameron
2023-11-10 16:27 ` Marius.Cristea
2023-12-04 9:43 ` Jonathan Cameron
2023-10-27 12:13 ` Krzysztof Kozlowski
2023-10-25 13:44 ` [PATCH v2 2/2] iio: adc: adding support for pac193x marius.cristea
2023-10-25 14:38 ` Nuno Sá
2023-10-26 15:03 ` Marius.Cristea
2023-10-27 8:40 ` Nuno Sá
2023-10-27 14:29 ` Jonathan Cameron
2023-10-25 17:23 ` kernel test robot
2023-10-27 12:20 ` Krzysztof Kozlowski
2023-10-27 15:18 ` Jonathan Cameron
2023-11-02 14:28 ` Robin Getz
2023-11-07 12:55 ` Marius.Cristea
2023-11-07 15:39 ` Robin Getz
2023-10-27 12:10 ` [PATCH v2 0/2] adding support for Microchip PAC193X Power Monitor Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231025134404.131485-2-marius.cristea@microchip.com \
--to=marius.cristea@microchip.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.