Re: [PATCH v4 2/2] PCI: altera: add support for agilex family fpga

[Bjorn Helgaas <helgaas@kernel.org>]

[+cc Joyce]

On Sun, Sep 17, 2023 at 10:35:46PM +0530, sharath.kumar.d.m@intel.com wrote:
> From: D M Sharath Kumar <sharath.kumar.d.m@intel.com>
> 
> create new instance of struct altera_pcie_data for
> "altr,pcie-root-port-3.0"
> provide corresponding callback
> "port_conf_off" points to avmm port config register base

Please mention the hardware platform that this corresponds to.

> +	/* interrupt pin not programmed in hardware, set to INTA*/

Add space before closing "*/".

> +	if (status & AGLX_CFG_AER) {
> +		ret = generic_handle_domain_irq(pcie->irq_domain, 0);
> +		if (ret)
> +			dev_err_ratelimited(dev, "unexpected IRQ\n");

Maybe include a hint about what the unexpected IRQ was?  An IRQ number
or "status" value?

> +static const struct altera_pcie_ops altera_pcie_ops_3_0 = {
> +	.alt_read_own_cfg = aglx_read_own_cfg,
> +	.alt_write_own_cfg = aglx_write_own_cfg,
> +	.get_link_status = aglx_altera_pcie_link_up,
> +	.alt_read_other_cfg = aglx_read_other_cfg,
> +	.alt_write_other_cfg = aglx_write_other_cfg,
> +	.rp_isr = aglx_isr,

Use the same order of function pointers in all of these structs and
make it match the struct altera_pcie_ops definition.  (Don't put
.get_link_status in the middle of the config accessors.)

>  static const struct of_device_id altera_pcie_of_match[] = {
>  	{.compatible = "altr,pcie-root-port-1.0",
>  	 .data = &altera_pcie_1_0_data },
>  	{.compatible = "altr,pcie-root-port-2.0",
>  	 .data = &altera_pcie_2_0_data },
> +	{.compatible = "altr,pcie-root-port-3.0",
> +	.data = &altera_pcie_3_0_data },

Make the .data indentation match the rest.