From: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
To: patrick@stwcx.xyz, Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>,
Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>,
linux-i2c@vger.kernel.org, linux-hwmon@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-doc@vger.kernel.org
Subject: [PATCH v3 1/2] dt-bindings: hwmon: Add lltc ltc4286 driver bindings
Date: Tue, 31 Oct 2023 15:21:21 +0800 [thread overview]
Message-ID: <20231031072124.201181-2-Delphine_CC_Chiu@Wiwynn.com> (raw)
In-Reply-To: <20231031072124.201181-1-Delphine_CC_Chiu@Wiwynn.com>
Add a device tree bindings for ltc4286 device.
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
Changelog:
v3 - Revise adi,vrange-select-25p6 to adi,vrange-low-enable
v2 - Revise vrange_select_25p6 to adi,vrange-select-25p6
- Add type for adi,vrange-select-25p6
- Revise rsense-micro-ohms to shunt-resistor-micro-ohms
---
.../bindings/hwmon/lltc,ltc4286.yaml | 52 +++++++++++++++++++
MAINTAINERS | 10 ++++
2 files changed, 62 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml
diff --git a/Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml b/Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml
new file mode 100644
index 000000000000..4695bca77c05
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/lltc,ltc4286.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LTC4286 power monitors
+
+maintainers:
+ - Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
+
+properties:
+ compatible:
+ enum:
+ - lltc,ltc4286
+ - lltc,ltc4287
+
+ reg:
+ maxItems: 1
+
+ adi,vrange-low-enable:
+ description:
+ This property is a bool parameter to represent the
+ voltage range is 25.6 volts or 102.4 volts for
+ this chip.
+ The default is 102.4 volts.
+ type: boolean
+
+ shunt-resistor-micro-ohms:
+ description:
+ Resistor value in micro-Ohm
+
+required:
+ - compatible
+ - reg
+ - shunt-resistor-micro-ohms
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-sensor@40 {
+ compatible = "lltc,ltc4286";
+ reg = <0x40>;
+ adi,vrange-low-enable;
+ shunt-resistor-micro-ohms = <300>;
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 55d9d860f1a7..c60e29dc04ad 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12489,6 +12489,16 @@ S: Maintained
F: Documentation/hwmon/ltc4261.rst
F: drivers/hwmon/ltc4261.c
+LTC4286 HARDWARE MONITOR DRIVER
+M: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
+L: linux-i2c@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml
+F: Documentation/devicetree/bindings/hwmon/ltc4286.rst
+F: drivers/hwmon/pmbus/Kconfig
+F: drivers/hwmon/pmbus/Makefile
+F: drivers/hwmon/pmbus/ltc4286.c
+
LTC4306 I2C MULTIPLEXER DRIVER
M: Michael Hennerich <michael.hennerich@analog.com>
L: linux-i2c@vger.kernel.org
--
2.25.1
next prev parent reply other threads:[~2023-10-31 7:21 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-31 7:21 [PATCH v3 0/2] LTC4286 and LTC4287 driver support Delphine CC Chiu
2023-10-31 7:21 ` Delphine CC Chiu [this message]
2023-10-31 17:06 ` [PATCH v3 1/2] dt-bindings: hwmon: Add lltc ltc4286 driver bindings Conor Dooley
2023-10-31 17:11 ` Guenter Roeck
2023-11-07 3:12 ` Delphine_CC_Chiu/WYHQ/Wiwynn
2023-10-31 7:21 ` [PATCH v3 2/2] hwmon: pmbus: Add ltc4286 driver Delphine CC Chiu
2023-10-31 18:09 ` Guenter Roeck
2023-11-07 3:21 ` Delphine_CC_Chiu/WYHQ/Wiwynn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231031072124.201181-2-Delphine_CC_Chiu@Wiwynn.com \
--to=delphine_cc_chiu@wiwynn.com \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=jdelvare@suse.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=patrick@stwcx.xyz \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.