[PATCH v2] serial: 8250: 8250_omap: Clear UART_HAS_RHR_IT_DIS bit

[Ronald Wahl <rwahl@gmx.de>]

From: Ronald Wahl <ronald.wahl@raritan.com>

This fixes commit 439c7183e5b9 ("serial: 8250: 8250_omap: Disable RX
interrupt after DMA enable") which unfortunately set the
UART_HAS_RHR_IT_DIS bit in the UART_OMAP_IER2 register and never
cleared it.

Fixes: 439c7183e5b9 ("serial: 8250: 8250_omap: Disable RX interrupt after DMA enable")
Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
---
V2: - add Fixes: tag
    - fix author

 drivers/tty/serial/8250/8250_omap.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index ca972fd37725..c7ab2963040b 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -914,7 +914,7 @@ static void __dma_rx_do_complete(struct uart_8250_port *p)
 	if (priv->habit & UART_HAS_RHR_IT_DIS) {
 		reg = serial_in(p, UART_OMAP_IER2);
 		reg &= ~UART_OMAP_IER2_RHR_IT_DIS;
-		serial_out(p, UART_OMAP_IER2, UART_OMAP_IER2_RHR_IT_DIS);
+		serial_out(p, UART_OMAP_IER2, reg);
 	}

 	dmaengine_tx_status(rxchan, cookie, &state);
@@ -1060,7 +1060,7 @@ static int omap_8250_rx_dma(struct uart_8250_port *p)
 	if (priv->habit & UART_HAS_RHR_IT_DIS) {
 		reg = serial_in(p, UART_OMAP_IER2);
 		reg |= UART_OMAP_IER2_RHR_IT_DIS;
-		serial_out(p, UART_OMAP_IER2, UART_OMAP_IER2_RHR_IT_DIS);
+		serial_out(p, UART_OMAP_IER2, reg);
 	}

 	dma_async_issue_pending(dma->rxchan);
--
2.41.0