All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	Manivannan Sadhasivam <mani@kernel.org>,
	Hans de Goede <hdegoede@redhat.com>,
	linux-media@vger.kernel.org,
	Alain Volmat <alain.volmat@foss.st.com>,
	stable@vger.kernel.org
Subject: Re: [PATCH v2 1/2] media: v4l2-cci: Add support for little-endian encoded registers
Date: Thu, 2 Nov 2023 03:22:17 +0200	[thread overview]
Message-ID: <20231102012217.GC5933@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20231101122354.270453-2-alexander.stein@ew.tq-group.com>

Hi Alexander,

Thank you for the patch.

On Wed, Nov 01, 2023 at 01:23:53PM +0100, Alexander Stein wrote:
> Some sensors, e.g. Sony, are using little-endian registers. Add support for

I would write Sony IMX290 here, as there are Sony sensors that use big
endian.

> those by encoding the endianess into Bit 20 of the register address.
> 
> Fixes: af73323b97702 ("media: imx290: Convert to new CCI register access helpers")
> Cc: stable@vger.kernel.org
> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
> ---
>  drivers/media/v4l2-core/v4l2-cci.c | 44 ++++++++++++++++++++++++------
>  include/media/v4l2-cci.h           |  5 ++++
>  2 files changed, 41 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/media/v4l2-core/v4l2-cci.c b/drivers/media/v4l2-core/v4l2-cci.c
> index bc2dbec019b04..673637b67bf67 100644
> --- a/drivers/media/v4l2-core/v4l2-cci.c
> +++ b/drivers/media/v4l2-core/v4l2-cci.c
> @@ -18,6 +18,7 @@
>  
>  int cci_read(struct regmap *map, u32 reg, u64 *val, int *err)
>  {
> +	bool little_endian;
>  	unsigned int len;
>  	u8 buf[8];
>  	int ret;
> @@ -25,6 +26,7 @@ int cci_read(struct regmap *map, u32 reg, u64 *val, int *err)
>  	if (err && *err)
>  		return *err;
>  
> +	little_endian = reg & CCI_REG_LE;

You could initialize the variable when declaring it. Same below.

>  	len = FIELD_GET(CCI_REG_WIDTH_MASK, reg);
>  	reg = FIELD_GET(CCI_REG_ADDR_MASK, reg);
>  
> @@ -40,16 +42,28 @@ int cci_read(struct regmap *map, u32 reg, u64 *val, int *err)
>  		*val = buf[0];
>  		break;
>  	case 2:
> -		*val = get_unaligned_be16(buf);
> +		if (little_endian)
> +			*val = get_unaligned_le16(buf);
> +		else
> +			*val = get_unaligned_be16(buf);

Unrelated to this patch, isn't buf aligned to a 4 bytes boundary ?

>  		break;
>  	case 3:
> -		*val = get_unaligned_be24(buf);
> +		if (little_endian)
> +			*val = get_unaligned_le24(buf);
> +		else
> +			*val = get_unaligned_be24(buf);
>  		break;
>  	case 4:
> -		*val = get_unaligned_be32(buf);
> +		if (little_endian)
> +			*val = get_unaligned_le32(buf);
> +		else
> +			*val = get_unaligned_be32(buf);
>  		break;
>  	case 8:
> -		*val = get_unaligned_be64(buf);
> +		if (little_endian)
> +			*val = get_unaligned_le64(buf);
> +		else
> +			*val = get_unaligned_be64(buf);
>  		break;
>  	default:
>  		dev_err(regmap_get_device(map), "Error invalid reg-width %u for reg 0x%04x\n",
> @@ -68,6 +82,7 @@ EXPORT_SYMBOL_GPL(cci_read);
>  
>  int cci_write(struct regmap *map, u32 reg, u64 val, int *err)
>  {
> +	bool little_endian;
>  	unsigned int len;
>  	u8 buf[8];
>  	int ret;
> @@ -75,6 +90,7 @@ int cci_write(struct regmap *map, u32 reg, u64 val, int *err)
>  	if (err && *err)
>  		return *err;
>  
> +	little_endian = reg & CCI_REG_LE;
>  	len = FIELD_GET(CCI_REG_WIDTH_MASK, reg);
>  	reg = FIELD_GET(CCI_REG_ADDR_MASK, reg);
>  
> @@ -83,16 +99,28 @@ int cci_write(struct regmap *map, u32 reg, u64 val, int *err)
>  		buf[0] = val;
>  		break;
>  	case 2:
> -		put_unaligned_be16(val, buf);
> +		if (little_endian)
> +			put_unaligned_le16(val, buf);
> +		else
> +			put_unaligned_be16(val, buf);
>  		break;
>  	case 3:
> -		put_unaligned_be24(val, buf);
> +		if (little_endian)
> +			put_unaligned_le24(val, buf);
> +		else
> +			put_unaligned_be24(val, buf);
>  		break;
>  	case 4:
> -		put_unaligned_be32(val, buf);
> +		if (little_endian)
> +			put_unaligned_le32(val, buf);
> +		else
> +			put_unaligned_be32(val, buf);
>  		break;
>  	case 8:
> -		put_unaligned_be64(val, buf);
> +		if (little_endian)
> +			put_unaligned_le64(val, buf);
> +		else
> +			put_unaligned_be64(val, buf);
>  		break;
>  	default:
>  		dev_err(regmap_get_device(map), "Error invalid reg-width %u for reg 0x%04x\n",
> diff --git a/include/media/v4l2-cci.h b/include/media/v4l2-cci.h
> index 0f6803e4b17e9..ef3faf0c9d44d 100644
> --- a/include/media/v4l2-cci.h
> +++ b/include/media/v4l2-cci.h
> @@ -32,12 +32,17 @@ struct cci_reg_sequence {
>  #define CCI_REG_ADDR_MASK		GENMASK(15, 0)
>  #define CCI_REG_WIDTH_SHIFT		16
>  #define CCI_REG_WIDTH_MASK		GENMASK(19, 16)
> +#define CCI_REG_LE			BIT(20)
>  
>  #define CCI_REG8(x)			((1 << CCI_REG_WIDTH_SHIFT) | (x))
>  #define CCI_REG16(x)			((2 << CCI_REG_WIDTH_SHIFT) | (x))
>  #define CCI_REG24(x)			((3 << CCI_REG_WIDTH_SHIFT) | (x))
>  #define CCI_REG32(x)			((4 << CCI_REG_WIDTH_SHIFT) | (x))
>  #define CCI_REG64(x)			((8 << CCI_REG_WIDTH_SHIFT) | (x))
> +#define CCI_REG16_LE(x)			((2 << CCI_REG_WIDTH_SHIFT) | (x) | CCI_REG_LE)
> +#define CCI_REG24_LE(x)			((3 << CCI_REG_WIDTH_SHIFT) | (x) | CCI_REG_LE)
> +#define CCI_REG32_LE(x)			((4 << CCI_REG_WIDTH_SHIFT) | (x) | CCI_REG_LE)
> +#define CCI_REG64_LE(x)			((8 << CCI_REG_WIDTH_SHIFT) | (x) | CCI_REG_LE)

I would put CCI_REG_LE first, to match the bits order.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

>  
>  /**
>   * cci_read() - Read a value from a single CCI register

-- 
Regards,

Laurent Pinchart

  reply	other threads:[~2023-11-02  1:22 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-01 12:23 [PATCH v2 0/2] v4l2-cci: little-endian registers Alexander Stein
2023-11-01 12:23 ` [PATCH v2 1/2] media: v4l2-cci: Add support for little-endian encoded registers Alexander Stein
2023-11-02  1:22   ` Laurent Pinchart [this message]
2023-11-02  6:30     ` Sakari Ailus
2023-11-02  7:51       ` Alexander Stein
2023-11-02  8:25         ` Sakari Ailus
2023-11-02  9:27           ` Hans de Goede
2023-11-02  9:56             ` Sakari Ailus
2023-11-02  9:58               ` Sakari Ailus
2023-11-02  7:55     ` Alexander Stein
2023-11-02  8:24       ` Laurent Pinchart
2023-11-02  8:31         ` Sakari Ailus
2023-11-02  8:33           ` Sakari Ailus
2023-11-01 12:23 ` [PATCH v2 2/2] media: i2c: imx290: Properly encode registers as little-endian Alexander Stein
2023-11-02  1:23   ` Laurent Pinchart
2023-11-01 15:26 ` [PATCH v2 0/2] v4l2-cci: little-endian registers Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231102012217.GC5933@pendragon.ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=alain.volmat@foss.st.com \
    --cc=alexander.stein@ew.tq-group.com \
    --cc=hdegoede@redhat.com \
    --cc=linux-media@vger.kernel.org \
    --cc=mani@kernel.org \
    --cc=mchehab@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.