All of lore.kernel.org
 help / color / mirror / Atom feed
From: Christian Marangi <ansuelsmth@gmail.com>
To: "David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>, Andrew Lunn <andrew@lunn.ch>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	Christian Marangi <ansuelsmth@gmail.com>,
	Robert Marko <robimarko@gmail.com>,
	Vladimir Oltean <vladimir.oltean@nxp.com>,
	netdev@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [net-next RFC PATCH v5 2/4] net: phy: aquantia: move MMD_VEND define to header
Date: Mon,  6 Nov 2023 17:54:31 +0100	[thread overview]
Message-ID: <20231106165433.2746-2-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20231106165433.2746-1-ansuelsmth@gmail.com>

Move MMD_VEND define to header to clean things up and in preparation for
firmware loading support that require some define placed in
aquantia_main.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
Changes v4:
- Add Reviewed-by tag
Changes v3:
- Add this patch

 drivers/net/phy/aquantia/aquantia.h       | 69 +++++++++++++++++++++++
 drivers/net/phy/aquantia/aquantia_hwmon.c | 14 -----
 drivers/net/phy/aquantia/aquantia_main.c  | 55 ------------------
 3 files changed, 69 insertions(+), 69 deletions(-)

diff --git a/drivers/net/phy/aquantia/aquantia.h b/drivers/net/phy/aquantia/aquantia.h
index c684b65c642c..f0c767c4fad1 100644
--- a/drivers/net/phy/aquantia/aquantia.h
+++ b/drivers/net/phy/aquantia/aquantia.h
@@ -9,6 +9,75 @@
 #include <linux/device.h>
 #include <linux/phy.h>
 
+/* Vendor specific 1, MDIO_MMD_VEND1 */
+#define VEND1_GLOBAL_FW_ID			0x0020
+#define VEND1_GLOBAL_FW_ID_MAJOR		GENMASK(15, 8)
+#define VEND1_GLOBAL_FW_ID_MINOR		GENMASK(7, 0)
+
+/* The following registers all have similar layouts; first the registers... */
+#define VEND1_GLOBAL_CFG_10M			0x0310
+#define VEND1_GLOBAL_CFG_100M			0x031b
+#define VEND1_GLOBAL_CFG_1G			0x031c
+#define VEND1_GLOBAL_CFG_2_5G			0x031d
+#define VEND1_GLOBAL_CFG_5G			0x031e
+#define VEND1_GLOBAL_CFG_10G			0x031f
+/* ...and now the fields */
+#define VEND1_GLOBAL_CFG_RATE_ADAPT		GENMASK(8, 7)
+#define VEND1_GLOBAL_CFG_RATE_ADAPT_NONE	0
+#define VEND1_GLOBAL_CFG_RATE_ADAPT_USX		1
+#define VEND1_GLOBAL_CFG_RATE_ADAPT_PAUSE	2
+
+/* Vendor specific 1, MDIO_MMD_VEND2 */
+#define VEND1_THERMAL_PROV_HIGH_TEMP_FAIL	0xc421
+#define VEND1_THERMAL_PROV_LOW_TEMP_FAIL	0xc422
+#define VEND1_THERMAL_PROV_HIGH_TEMP_WARN	0xc423
+#define VEND1_THERMAL_PROV_LOW_TEMP_WARN	0xc424
+#define VEND1_THERMAL_STAT1			0xc820
+#define VEND1_THERMAL_STAT2			0xc821
+#define VEND1_THERMAL_STAT2_VALID		BIT(0)
+#define VEND1_GENERAL_STAT1			0xc830
+#define VEND1_GENERAL_STAT1_HIGH_TEMP_FAIL	BIT(14)
+#define VEND1_GENERAL_STAT1_LOW_TEMP_FAIL	BIT(13)
+#define VEND1_GENERAL_STAT1_HIGH_TEMP_WARN	BIT(12)
+#define VEND1_GENERAL_STAT1_LOW_TEMP_WARN	BIT(11)
+
+#define VEND1_GLOBAL_GEN_STAT2			0xc831
+#define VEND1_GLOBAL_GEN_STAT2_OP_IN_PROG	BIT(15)
+
+#define VEND1_GLOBAL_RSVD_STAT1			0xc885
+#define VEND1_GLOBAL_RSVD_STAT1_FW_BUILD_ID	GENMASK(7, 4)
+#define VEND1_GLOBAL_RSVD_STAT1_PROV_ID		GENMASK(3, 0)
+
+#define VEND1_GLOBAL_RSVD_STAT9			0xc88d
+#define VEND1_GLOBAL_RSVD_STAT9_MODE		GENMASK(7, 0)
+#define VEND1_GLOBAL_RSVD_STAT9_1000BT2		0x23
+
+#define VEND1_GLOBAL_INT_STD_STATUS		0xfc00
+#define VEND1_GLOBAL_INT_VEND_STATUS		0xfc01
+
+#define VEND1_GLOBAL_INT_STD_MASK		0xff00
+#define VEND1_GLOBAL_INT_STD_MASK_PMA1		BIT(15)
+#define VEND1_GLOBAL_INT_STD_MASK_PMA2		BIT(14)
+#define VEND1_GLOBAL_INT_STD_MASK_PCS1		BIT(13)
+#define VEND1_GLOBAL_INT_STD_MASK_PCS2		BIT(12)
+#define VEND1_GLOBAL_INT_STD_MASK_PCS3		BIT(11)
+#define VEND1_GLOBAL_INT_STD_MASK_PHY_XS1	BIT(10)
+#define VEND1_GLOBAL_INT_STD_MASK_PHY_XS2	BIT(9)
+#define VEND1_GLOBAL_INT_STD_MASK_AN1		BIT(8)
+#define VEND1_GLOBAL_INT_STD_MASK_AN2		BIT(7)
+#define VEND1_GLOBAL_INT_STD_MASK_GBE		BIT(6)
+#define VEND1_GLOBAL_INT_STD_MASK_ALL		BIT(0)
+
+#define VEND1_GLOBAL_INT_VEND_MASK		0xff01
+#define VEND1_GLOBAL_INT_VEND_MASK_PMA		BIT(15)
+#define VEND1_GLOBAL_INT_VEND_MASK_PCS		BIT(14)
+#define VEND1_GLOBAL_INT_VEND_MASK_PHY_XS	BIT(13)
+#define VEND1_GLOBAL_INT_VEND_MASK_AN		BIT(12)
+#define VEND1_GLOBAL_INT_VEND_MASK_GBE		BIT(11)
+#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL1	BIT(2)
+#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL2	BIT(1)
+#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL3	BIT(0)
+
 #if IS_REACHABLE(CONFIG_HWMON)
 int aqr_hwmon_probe(struct phy_device *phydev);
 #else
diff --git a/drivers/net/phy/aquantia/aquantia_hwmon.c b/drivers/net/phy/aquantia/aquantia_hwmon.c
index 0da451e46f69..7b3c49c3bf49 100644
--- a/drivers/net/phy/aquantia/aquantia_hwmon.c
+++ b/drivers/net/phy/aquantia/aquantia_hwmon.c
@@ -13,20 +13,6 @@
 
 #include "aquantia.h"
 
-/* Vendor specific 1, MDIO_MMD_VEND2 */
-#define VEND1_THERMAL_PROV_HIGH_TEMP_FAIL	0xc421
-#define VEND1_THERMAL_PROV_LOW_TEMP_FAIL	0xc422
-#define VEND1_THERMAL_PROV_HIGH_TEMP_WARN	0xc423
-#define VEND1_THERMAL_PROV_LOW_TEMP_WARN	0xc424
-#define VEND1_THERMAL_STAT1			0xc820
-#define VEND1_THERMAL_STAT2			0xc821
-#define VEND1_THERMAL_STAT2_VALID		BIT(0)
-#define VEND1_GENERAL_STAT1			0xc830
-#define VEND1_GENERAL_STAT1_HIGH_TEMP_FAIL	BIT(14)
-#define VEND1_GENERAL_STAT1_LOW_TEMP_FAIL	BIT(13)
-#define VEND1_GENERAL_STAT1_HIGH_TEMP_WARN	BIT(12)
-#define VEND1_GENERAL_STAT1_LOW_TEMP_WARN	BIT(11)
-
 #if IS_REACHABLE(CONFIG_HWMON)
 
 static umode_t aqr_hwmon_is_visible(const void *data,
diff --git a/drivers/net/phy/aquantia/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c
index 334a6904ca5a..4498426e9a52 100644
--- a/drivers/net/phy/aquantia/aquantia_main.c
+++ b/drivers/net/phy/aquantia/aquantia_main.c
@@ -91,61 +91,6 @@
 #define MDIO_C22EXT_STAT_SGMII_TX_FRAME_ALIGN_ERR	0xd31a
 #define MDIO_C22EXT_STAT_SGMII_TX_RUNT_FRAMES		0xd31b
 
-/* Vendor specific 1, MDIO_MMD_VEND1 */
-#define VEND1_GLOBAL_FW_ID			0x0020
-#define VEND1_GLOBAL_FW_ID_MAJOR		GENMASK(15, 8)
-#define VEND1_GLOBAL_FW_ID_MINOR		GENMASK(7, 0)
-
-#define VEND1_GLOBAL_GEN_STAT2			0xc831
-#define VEND1_GLOBAL_GEN_STAT2_OP_IN_PROG	BIT(15)
-
-/* The following registers all have similar layouts; first the registers... */
-#define VEND1_GLOBAL_CFG_10M			0x0310
-#define VEND1_GLOBAL_CFG_100M			0x031b
-#define VEND1_GLOBAL_CFG_1G			0x031c
-#define VEND1_GLOBAL_CFG_2_5G			0x031d
-#define VEND1_GLOBAL_CFG_5G			0x031e
-#define VEND1_GLOBAL_CFG_10G			0x031f
-/* ...and now the fields */
-#define VEND1_GLOBAL_CFG_RATE_ADAPT		GENMASK(8, 7)
-#define VEND1_GLOBAL_CFG_RATE_ADAPT_NONE	0
-#define VEND1_GLOBAL_CFG_RATE_ADAPT_USX		1
-#define VEND1_GLOBAL_CFG_RATE_ADAPT_PAUSE	2
-
-#define VEND1_GLOBAL_RSVD_STAT1			0xc885
-#define VEND1_GLOBAL_RSVD_STAT1_FW_BUILD_ID	GENMASK(7, 4)
-#define VEND1_GLOBAL_RSVD_STAT1_PROV_ID		GENMASK(3, 0)
-
-#define VEND1_GLOBAL_RSVD_STAT9			0xc88d
-#define VEND1_GLOBAL_RSVD_STAT9_MODE		GENMASK(7, 0)
-#define VEND1_GLOBAL_RSVD_STAT9_1000BT2		0x23
-
-#define VEND1_GLOBAL_INT_STD_STATUS		0xfc00
-#define VEND1_GLOBAL_INT_VEND_STATUS		0xfc01
-
-#define VEND1_GLOBAL_INT_STD_MASK		0xff00
-#define VEND1_GLOBAL_INT_STD_MASK_PMA1		BIT(15)
-#define VEND1_GLOBAL_INT_STD_MASK_PMA2		BIT(14)
-#define VEND1_GLOBAL_INT_STD_MASK_PCS1		BIT(13)
-#define VEND1_GLOBAL_INT_STD_MASK_PCS2		BIT(12)
-#define VEND1_GLOBAL_INT_STD_MASK_PCS3		BIT(11)
-#define VEND1_GLOBAL_INT_STD_MASK_PHY_XS1	BIT(10)
-#define VEND1_GLOBAL_INT_STD_MASK_PHY_XS2	BIT(9)
-#define VEND1_GLOBAL_INT_STD_MASK_AN1		BIT(8)
-#define VEND1_GLOBAL_INT_STD_MASK_AN2		BIT(7)
-#define VEND1_GLOBAL_INT_STD_MASK_GBE		BIT(6)
-#define VEND1_GLOBAL_INT_STD_MASK_ALL		BIT(0)
-
-#define VEND1_GLOBAL_INT_VEND_MASK		0xff01
-#define VEND1_GLOBAL_INT_VEND_MASK_PMA		BIT(15)
-#define VEND1_GLOBAL_INT_VEND_MASK_PCS		BIT(14)
-#define VEND1_GLOBAL_INT_VEND_MASK_PHY_XS	BIT(13)
-#define VEND1_GLOBAL_INT_VEND_MASK_AN		BIT(12)
-#define VEND1_GLOBAL_INT_VEND_MASK_GBE		BIT(11)
-#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL1	BIT(2)
-#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL2	BIT(1)
-#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL3	BIT(0)
-
 /* Sleep and timeout for checking if the Processor-Intensive
  * MDIO operation is finished
  */
-- 
2.40.1


  reply	other threads:[~2023-11-06 16:54 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-06 16:54 [net-next RFC PATCH v5 1/4] net: phy: aquantia: move to separate directory Christian Marangi
2023-11-06 16:54 ` Christian Marangi [this message]
2023-11-06 16:54 ` [net-next RFC PATCH v5 3/4] net: phy: aquantia: add firmware load support Christian Marangi
2023-11-06 16:54 ` [net-next RFC PATCH v5 4/4] dt-bindings: Document bindings for Marvell Aquantia PHY Christian Marangi
2023-11-06 17:33   ` Conor Dooley
2023-11-07 19:22   ` Rob Herring
2023-11-09 10:38     ` Christian Marangi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231106165433.2746-2-ansuelsmth@gmail.com \
    --to=ansuelsmth@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=conor+dt@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=hkallweit1@gmail.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=robh+dt@kernel.org \
    --cc=robimarko@gmail.com \
    --cc=vladimir.oltean@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.