All of lore.kernel.org
 help / color / mirror / Atom feed
From: Luiz Angelo Daros de Luca <luizluca@gmail.com>
To: netdev@vger.kernel.org
Cc: linus.walleij@linaro.org, alsi@bang-olufsen.dk, andrew@lunn.ch,
	vivien.didelot@gmail.com, f.fainelli@gmail.com,
	olteanv@gmail.com, davem@davemloft.net, kuba@kernel.org,
	pabeni@redhat.com, robh+dt@kernel.org, krzk+dt@kernel.org,
	arinc.unal@arinc9.com,
	Luiz Angelo Daros de Luca <luizluca@gmail.com>
Subject: [RFC net-next 3/5] net: dsa: realtek: create realtek-common
Date: Sat, 11 Nov 2023 18:51:06 -0300	[thread overview]
Message-ID: <20231111215647.4966-4-luizluca@gmail.com> (raw)
In-Reply-To: <20231111215647.4966-1-luizluca@gmail.com>

Some code can be shared between both interface modules (MDIO and SMI)
and amongst variants. For now, these interface functions are shared:

- realtek_common_lock
- realtek_common_unlock
- realtek_common_probe
- realtek_common_remove

The reset during probe was moved to the last moment before a variant
detects the switch. This way, we avoid a reset if anything else fails.

The symbols from variants used in of_match_table are now in a single
match table in realtek-common, used by both interfaces.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
---
 drivers/net/dsa/realtek/Makefile         |   1 +
 drivers/net/dsa/realtek/realtek-common.c | 139 +++++++++++++++++++++++
 drivers/net/dsa/realtek/realtek-common.h |  16 +++
 drivers/net/dsa/realtek/realtek-mdio.c   | 116 +++----------------
 drivers/net/dsa/realtek/realtek-smi.c    | 127 +++------------------
 drivers/net/dsa/realtek/realtek.h        |   2 +
 6 files changed, 184 insertions(+), 217 deletions(-)
 create mode 100644 drivers/net/dsa/realtek/realtek-common.c
 create mode 100644 drivers/net/dsa/realtek/realtek-common.h

diff --git a/drivers/net/dsa/realtek/Makefile b/drivers/net/dsa/realtek/Makefile
index 0aab57252a7c..5e0c1ef200a3 100644
--- a/drivers/net/dsa/realtek/Makefile
+++ b/drivers/net/dsa/realtek/Makefile
@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_NET_DSA_REALTEK)		+= realtek-common.o
 obj-$(CONFIG_NET_DSA_REALTEK_MDIO) 	+= realtek-mdio.o
 obj-$(CONFIG_NET_DSA_REALTEK_SMI) 	+= realtek-smi.o
 obj-$(CONFIG_NET_DSA_REALTEK_RTL8366RB) += rtl8366.o
diff --git a/drivers/net/dsa/realtek/realtek-common.c b/drivers/net/dsa/realtek/realtek-common.c
new file mode 100644
index 000000000000..36f8b60771be
--- /dev/null
+++ b/drivers/net/dsa/realtek/realtek-common.c
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/module.h>
+
+#include "realtek.h"
+#include "realtek-common.h"
+
+void realtek_common_lock(void *ctx)
+{
+	struct realtek_priv *priv = ctx;
+
+	mutex_lock(&priv->map_lock);
+}
+EXPORT_SYMBOL_GPL(realtek_common_lock);
+
+void realtek_common_unlock(void *ctx)
+{
+	struct realtek_priv *priv = ctx;
+
+	mutex_unlock(&priv->map_lock);
+}
+EXPORT_SYMBOL_GPL(realtek_common_unlock);
+
+struct realtek_priv *realtek_common_probe(struct device *dev,
+		struct regmap_config rc, struct regmap_config rc_nolock)
+{
+	const struct realtek_variant *var;
+	struct realtek_priv *priv;
+	struct device_node *np;
+	int ret;
+
+	var = of_device_get_match_data(dev);
+	if (!var)
+		return ERR_PTR(-EINVAL);
+
+	priv = devm_kzalloc(dev, size_add(sizeof(*priv), var->chip_data_sz),
+			    GFP_KERNEL);
+	if (!priv)
+		return ERR_PTR(-ENOMEM);
+
+	mutex_init(&priv->map_lock);
+
+	rc.lock_arg = priv;
+	priv->map = devm_regmap_init(dev, NULL, priv, &rc);
+	if (IS_ERR(priv->map)) {
+		ret = PTR_ERR(priv->map);
+		dev_err(dev, "regmap init failed: %d\n", ret);
+		return ERR_PTR(ret);
+	}
+
+	priv->map_nolock = devm_regmap_init(dev, NULL, priv, &rc_nolock);
+	if (IS_ERR(priv->map_nolock)) {
+		ret = PTR_ERR(priv->map_nolock);
+		dev_err(dev, "regmap init failed: %d\n", ret);
+		return ERR_PTR(ret);
+	}
+
+	/* Link forward and backward */
+	priv->dev = dev;
+	priv->clk_delay = var->clk_delay;
+	priv->cmd_read = var->cmd_read;
+	priv->cmd_write = var->cmd_write;
+	priv->variant = var;
+	priv->ops = var->ops;
+	priv->chip_data = (void *)priv + sizeof(*priv);
+
+	dev_set_drvdata(dev, priv);
+	spin_lock_init(&priv->lock);
+
+	/* Fetch MDIO pins */
+	priv->mdc = devm_gpiod_get_optional(dev, "mdc", GPIOD_OUT_LOW);
+	if (IS_ERR(priv->mdc))
+		return ERR_CAST(priv->mdc);
+
+	priv->mdio = devm_gpiod_get_optional(dev, "mdio", GPIOD_OUT_LOW);
+	if (IS_ERR(priv->mdio))
+		return ERR_CAST(priv->mdio);
+
+	np = dev->of_node;
+
+	priv->leds_disabled = of_property_read_bool(np, "realtek,disable-leds");
+
+	/* TODO: if power is software controlled, set up any regulators here */
+
+	priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(priv->reset)) {
+		dev_err(dev, "failed to get RESET GPIO\n");
+		return ERR_CAST(priv->reset);
+	}
+	if (priv->reset) {
+		gpiod_set_value(priv->reset, 1);
+		dev_dbg(dev, "asserted RESET\n");
+		msleep(REALTEK_HW_STOP_DELAY);
+		gpiod_set_value(priv->reset, 0);
+		msleep(REALTEK_HW_START_DELAY);
+		dev_dbg(dev, "deasserted RESET\n");
+	}
+
+	priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL);
+	if (!priv->ds)
+		return ERR_PTR(-ENOMEM);
+
+	priv->ds->dev = dev;
+	priv->ds->priv = priv;
+
+	return priv;
+}
+EXPORT_SYMBOL(realtek_common_probe);
+
+void realtek_common_remove(struct realtek_priv *priv)
+{
+	if (!priv)
+		return;
+
+	dsa_unregister_switch(priv->ds);
+	if (priv->user_mii_bus)
+		of_node_put(priv->user_mii_bus->dev.of_node);
+
+	/* leave the device reset asserted */
+	if (priv->reset)
+		gpiod_set_value(priv->reset, 1);
+}
+EXPORT_SYMBOL(realtek_common_remove);
+
+const struct of_device_id realtek_common_of_match[] = {
+#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8366RB)
+	{ .compatible = "realtek,rtl8366rb", .data = &rtl8366rb_variant, },
+#endif
+#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8365MB)
+	{ .compatible = "realtek,rtl8365mb", .data = &rtl8366rb_variant, },
+#endif
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, realtek_common_of_match);
+EXPORT_SYMBOL_GPL(realtek_common_of_match);
+
+MODULE_AUTHOR("Luiz Angelo Daros de Luca <luizluca@gmail.com>");
+MODULE_DESCRIPTION("Realtek DSA switches common module");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/dsa/realtek/realtek-common.h b/drivers/net/dsa/realtek/realtek-common.h
new file mode 100644
index 000000000000..90a949386518
--- /dev/null
+++ b/drivers/net/dsa/realtek/realtek-common.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef _REALTEK_INTERFACE_H
+#define _REALTEK_INTERFACE_H
+
+#include <linux/regmap.h>
+
+extern const struct of_device_id realtek_common_of_match[];
+
+void realtek_common_lock(void *ctx);
+void realtek_common_unlock(void *ctx);
+struct realtek_priv *realtek_common_probe(struct device *dev,
+		struct regmap_config rc, struct regmap_config rc_nolock);
+void realtek_common_remove(struct realtek_priv *priv);
+
+#endif
diff --git a/drivers/net/dsa/realtek/realtek-mdio.c b/drivers/net/dsa/realtek/realtek-mdio.c
index 292e6d087e8b..6f610386c977 100644
--- a/drivers/net/dsa/realtek/realtek-mdio.c
+++ b/drivers/net/dsa/realtek/realtek-mdio.c
@@ -25,6 +25,7 @@
 #include <linux/regmap.h>
 
 #include "realtek.h"
+#include "realtek-common.h"
 
 /* Read/write via mdiobus */
 #define REALTEK_MDIO_CTRL0_REG		31
@@ -99,20 +100,6 @@ static int realtek_mdio_read(void *ctx, u32 reg, u32 *val)
 	return ret;
 }
 
-static void realtek_mdio_lock(void *ctx)
-{
-	struct realtek_priv *priv = ctx;
-
-	mutex_lock(&priv->map_lock);
-}
-
-static void realtek_mdio_unlock(void *ctx)
-{
-	struct realtek_priv *priv = ctx;
-
-	mutex_unlock(&priv->map_lock);
-}
-
 static const struct regmap_config realtek_mdio_regmap_config = {
 	.reg_bits = 10, /* A4..A0 R4..R0 */
 	.val_bits = 16,
@@ -123,8 +110,8 @@ static const struct regmap_config realtek_mdio_regmap_config = {
 	.reg_read = realtek_mdio_read,
 	.reg_write = realtek_mdio_write,
 	.cache_type = REGCACHE_NONE,
-	.lock = realtek_mdio_lock,
-	.unlock = realtek_mdio_unlock,
+	.lock = realtek_common_lock,
+	.unlock = realtek_common_unlock,
 };
 
 static const struct regmap_config realtek_mdio_nolock_regmap_config = {
@@ -142,75 +129,19 @@ static const struct regmap_config realtek_mdio_nolock_regmap_config = {
 
 static int realtek_mdio_probe(struct mdio_device *mdiodev)
 {
-	struct realtek_priv *priv;
 	struct device *dev = &mdiodev->dev;
-	const struct realtek_variant *var;
-	struct regmap_config rc;
-	struct device_node *np;
+	struct realtek_priv *priv;
 	int ret;
 
-	var = of_device_get_match_data(dev);
-	if (!var)
-		return -EINVAL;
-
-	priv = devm_kzalloc(&mdiodev->dev,
-			    size_add(sizeof(*priv), var->chip_data_sz),
-			    GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-
-	mutex_init(&priv->map_lock);
-
-	rc = realtek_mdio_regmap_config;
-	rc.lock_arg = priv;
-	priv->map = devm_regmap_init(dev, NULL, priv, &rc);
-	if (IS_ERR(priv->map)) {
-		ret = PTR_ERR(priv->map);
-		dev_err(dev, "regmap init failed: %d\n", ret);
-		return ret;
-	}
-
-	rc = realtek_mdio_nolock_regmap_config;
-	priv->map_nolock = devm_regmap_init(dev, NULL, priv, &rc);
-	if (IS_ERR(priv->map_nolock)) {
-		ret = PTR_ERR(priv->map_nolock);
-		dev_err(dev, "regmap init failed: %d\n", ret);
-		return ret;
-	}
+	priv = realtek_common_probe(dev, realtek_mdio_regmap_config,
+				    realtek_mdio_nolock_regmap_config);
+	if (IS_ERR(priv))
+		return PTR_ERR(priv);
 
 	priv->mdio_addr = mdiodev->addr;
 	priv->bus = mdiodev->bus;
-	priv->dev = &mdiodev->dev;
-	priv->chip_data = (void *)priv + sizeof(*priv);
-
-	priv->clk_delay = var->clk_delay;
-	priv->cmd_read = var->cmd_read;
-	priv->cmd_write = var->cmd_write;
-	priv->ops = var->ops;
-
 	priv->write_reg_noack = realtek_mdio_write;
-
-	np = dev->of_node;
-
-	dev_set_drvdata(dev, priv);
-
-	/* TODO: if power is software controlled, set up any regulators here */
-	priv->leds_disabled = of_property_read_bool(np, "realtek,disable-leds");
-
-	priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
-	if (IS_ERR(priv->reset)) {
-		dev_err(dev, "failed to get RESET GPIO\n");
-		return PTR_ERR(priv->reset);
-	}
-
-	if (priv->reset) {
-		gpiod_set_value(priv->reset, 1);
-		dev_dbg(dev, "asserted RESET\n");
-		msleep(REALTEK_HW_STOP_DELAY);
-		gpiod_set_value(priv->reset, 0);
-		msleep(REALTEK_HW_START_DELAY);
-		dev_dbg(dev, "deasserted RESET\n");
-	}
+	priv->ds->ops = priv->variant->ds_ops_mdio;
 
 	ret = priv->ops->detect(priv);
 	if (ret) {
@@ -218,18 +149,12 @@ static int realtek_mdio_probe(struct mdio_device *mdiodev)
 		return ret;
 	}
 
-	priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL);
-	if (!priv->ds)
-		return -ENOMEM;
-
-	priv->ds->dev = dev;
 	priv->ds->num_ports = priv->num_ports;
-	priv->ds->priv = priv;
-	priv->ds->ops = var->ds_ops_mdio;
 
 	ret = dsa_register_switch(priv->ds);
 	if (ret) {
-		dev_err(priv->dev, "unable to register switch ret = %d\n", ret);
+		dev_err_probe(dev, ret, "unable to register switch ret = %pe\n",
+			      ERR_PTR(ret));
 		return ret;
 	}
 
@@ -243,11 +168,7 @@ static void realtek_mdio_remove(struct mdio_device *mdiodev)
 	if (!priv)
 		return;
 
-	dsa_unregister_switch(priv->ds);
-
-	/* leave the device reset asserted */
-	if (priv->reset)
-		gpiod_set_value(priv->reset, 1);
+	realtek_common_remove(priv);
 }
 
 static void realtek_mdio_shutdown(struct mdio_device *mdiodev)
@@ -262,21 +183,10 @@ static void realtek_mdio_shutdown(struct mdio_device *mdiodev)
 	dev_set_drvdata(&mdiodev->dev, NULL);
 }
 
-static const struct of_device_id realtek_mdio_of_match[] = {
-#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8366RB)
-	{ .compatible = "realtek,rtl8366rb", .data = &rtl8366rb_variant, },
-#endif
-#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8365MB)
-	{ .compatible = "realtek,rtl8365mb", .data = &rtl8365mb_variant, },
-#endif
-	{ /* sentinel */ },
-};
-MODULE_DEVICE_TABLE(of, realtek_mdio_of_match);
-
 static struct mdio_driver realtek_mdio_driver = {
 	.mdiodrv.driver = {
 		.name = "realtek-mdio",
-		.of_match_table = realtek_mdio_of_match,
+		.of_match_table = realtek_common_of_match,
 	},
 	.probe  = realtek_mdio_probe,
 	.remove = realtek_mdio_remove,
diff --git a/drivers/net/dsa/realtek/realtek-smi.c b/drivers/net/dsa/realtek/realtek-smi.c
index 755546ed8db6..0cf89f9db99e 100644
--- a/drivers/net/dsa/realtek/realtek-smi.c
+++ b/drivers/net/dsa/realtek/realtek-smi.c
@@ -40,6 +40,7 @@
 #include <linux/if_bridge.h>
 
 #include "realtek.h"
+#include "realtek-common.h"
 
 #define REALTEK_SMI_ACK_RETRY_COUNT		5
 
@@ -310,20 +311,6 @@ static int realtek_smi_read(void *ctx, u32 reg, u32 *val)
 	return realtek_smi_read_reg(priv, reg, val);
 }
 
-static void realtek_smi_lock(void *ctx)
-{
-	struct realtek_priv *priv = ctx;
-
-	mutex_lock(&priv->map_lock);
-}
-
-static void realtek_smi_unlock(void *ctx)
-{
-	struct realtek_priv *priv = ctx;
-
-	mutex_unlock(&priv->map_lock);
-}
-
 static const struct regmap_config realtek_smi_regmap_config = {
 	.reg_bits = 10, /* A4..A0 R4..R0 */
 	.val_bits = 16,
@@ -334,8 +321,8 @@ static const struct regmap_config realtek_smi_regmap_config = {
 	.reg_read = realtek_smi_read,
 	.reg_write = realtek_smi_write,
 	.cache_type = REGCACHE_NONE,
-	.lock = realtek_smi_lock,
-	.unlock = realtek_smi_unlock,
+	.lock = realtek_common_lock,
+	.unlock = realtek_common_unlock,
 };
 
 static const struct regmap_config realtek_smi_nolock_regmap_config = {
@@ -410,78 +397,18 @@ static int realtek_smi_setup_mdio(struct dsa_switch *ds)
 
 static int realtek_smi_probe(struct platform_device *pdev)
 {
-	const struct realtek_variant *var;
 	struct device *dev = &pdev->dev;
 	struct realtek_priv *priv;
-	struct regmap_config rc;
-	struct device_node *np;
 	int ret;
 
-	var = of_device_get_match_data(dev);
-	np = dev->of_node;
-
-	priv = devm_kzalloc(dev, sizeof(*priv) + var->chip_data_sz, GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-	priv->chip_data = (void *)priv + sizeof(*priv);
-
-	mutex_init(&priv->map_lock);
-
-	rc = realtek_smi_regmap_config;
-	rc.lock_arg = priv;
-	priv->map = devm_regmap_init(dev, NULL, priv, &rc);
-	if (IS_ERR(priv->map)) {
-		ret = PTR_ERR(priv->map);
-		dev_err(dev, "regmap init failed: %d\n", ret);
-		return ret;
-	}
-
-	rc = realtek_smi_nolock_regmap_config;
-	priv->map_nolock = devm_regmap_init(dev, NULL, priv, &rc);
-	if (IS_ERR(priv->map_nolock)) {
-		ret = PTR_ERR(priv->map_nolock);
-		dev_err(dev, "regmap init failed: %d\n", ret);
-		return ret;
-	}
-
-	/* Link forward and backward */
-	priv->dev = dev;
-	priv->clk_delay = var->clk_delay;
-	priv->cmd_read = var->cmd_read;
-	priv->cmd_write = var->cmd_write;
-	priv->ops = var->ops;
+	priv = realtek_common_probe(dev, realtek_smi_regmap_config,
+				    realtek_smi_nolock_regmap_config);
+	if (IS_ERR(priv))
+		return PTR_ERR(priv);
 
 	priv->setup_interface = realtek_smi_setup_mdio;
 	priv->write_reg_noack = realtek_smi_write_reg_noack;
-
-	dev_set_drvdata(dev, priv);
-	spin_lock_init(&priv->lock);
-
-	/* TODO: if power is software controlled, set up any regulators here */
-
-	priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
-	if (IS_ERR(priv->reset)) {
-		dev_err(dev, "failed to get RESET GPIO\n");
-		return PTR_ERR(priv->reset);
-	}
-	if (priv->reset) {
-		gpiod_set_value(priv->reset, 1);
-		dev_dbg(dev, "asserted RESET\n");
-		msleep(REALTEK_HW_STOP_DELAY);
-		gpiod_set_value(priv->reset, 0);
-		msleep(REALTEK_HW_START_DELAY);
-		dev_dbg(dev, "deasserted RESET\n");
-	}
-
-	/* Fetch MDIO pins */
-	priv->mdc = devm_gpiod_get_optional(dev, "mdc", GPIOD_OUT_LOW);
-	if (IS_ERR(priv->mdc))
-		return PTR_ERR(priv->mdc);
-	priv->mdio = devm_gpiod_get_optional(dev, "mdio", GPIOD_OUT_LOW);
-	if (IS_ERR(priv->mdio))
-		return PTR_ERR(priv->mdio);
-
-	priv->leds_disabled = of_property_read_bool(np, "realtek,disable-leds");
+	priv->ds->ops = priv->variant->ds_ops_smi;
 
 	ret = priv->ops->detect(priv);
 	if (ret) {
@@ -489,20 +416,15 @@ static int realtek_smi_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL);
-	if (!priv->ds)
-		return -ENOMEM;
-
-	priv->ds->dev = dev;
 	priv->ds->num_ports = priv->num_ports;
-	priv->ds->priv = priv;
 
-	priv->ds->ops = var->ds_ops_smi;
 	ret = dsa_register_switch(priv->ds);
 	if (ret) {
-		dev_err_probe(dev, ret, "unable to register switch\n");
+		dev_err_probe(dev, ret, "unable to register switch ret = %pe\n",
+			      ERR_PTR(ret));
 		return ret;
 	}
+
 	return 0;
 }
 
@@ -513,13 +435,7 @@ static void realtek_smi_remove(struct platform_device *pdev)
 	if (!priv)
 		return;
 
-	dsa_unregister_switch(priv->ds);
-	if (priv->user_mii_bus)
-		of_node_put(priv->user_mii_bus->dev.of_node);
-
-	/* leave the device reset asserted */
-	if (priv->reset)
-		gpiod_set_value(priv->reset, 1);
+	realtek_common_remove(priv);
 }
 
 static void realtek_smi_shutdown(struct platform_device *pdev)
@@ -534,27 +450,10 @@ static void realtek_smi_shutdown(struct platform_device *pdev)
 	platform_set_drvdata(pdev, NULL);
 }
 
-static const struct of_device_id realtek_smi_of_match[] = {
-#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8366RB)
-	{
-		.compatible = "realtek,rtl8366rb",
-		.data = &rtl8366rb_variant,
-	},
-#endif
-#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8365MB)
-	{
-		.compatible = "realtek,rtl8365mb",
-		.data = &rtl8365mb_variant,
-	},
-#endif
-	{ /* sentinel */ },
-};
-MODULE_DEVICE_TABLE(of, realtek_smi_of_match);
-
 static struct platform_driver realtek_smi_driver = {
 	.driver = {
 		.name = "realtek-smi",
-		.of_match_table = realtek_smi_of_match,
+		.of_match_table = realtek_common_of_match,
 	},
 	.probe  = realtek_smi_probe,
 	.remove_new = realtek_smi_remove,
diff --git a/drivers/net/dsa/realtek/realtek.h b/drivers/net/dsa/realtek/realtek.h
index 790488e9c667..8d9d546bf5f5 100644
--- a/drivers/net/dsa/realtek/realtek.h
+++ b/drivers/net/dsa/realtek/realtek.h
@@ -79,6 +79,8 @@ struct realtek_priv {
 	int			vlan_enabled;
 	int			vlan4k_enabled;
 
+	const struct realtek_variant *variant;
+
 	char			buf[4096];
 	void			*chip_data; /* Per-chip extra variant data */
 };
-- 
2.42.1


  parent reply	other threads:[~2023-11-11 21:57 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-11 21:51 [RFC net-next 0/5] refactor realtek switches and add reset controller Luiz Angelo Daros de Luca
2023-11-11 21:51 ` [RFC net-next 1/5] dt-bindings: net: dsa: realtek: reset-gpios is not required Luiz Angelo Daros de Luca
2023-11-12  7:37   ` Krzysztof Kozlowski
2023-11-13 20:30     ` Luiz Angelo Daros de Luca
2023-11-13  8:31   ` Linus Walleij
2023-11-14 12:23   ` Alvin Šipraga
2023-11-11 21:51 ` [RFC net-next 2/5] dt-bindings: net: dsa: realtek: add reset controller Luiz Angelo Daros de Luca
2023-11-13  8:31   ` Linus Walleij
2023-11-14 12:23   ` Alvin Šipraga
2023-11-16 16:25   ` Rob Herring
2023-11-11 21:51 ` Luiz Angelo Daros de Luca [this message]
2023-11-12  7:39   ` [RFC net-next 3/5] net: dsa: realtek: create realtek-common Krzysztof Kozlowski
2023-11-13  8:35   ` Linus Walleij
2023-11-13 20:41     ` Luiz Angelo Daros de Luca
2023-11-13 22:01       ` Alvin Šipraga
2023-11-14 11:43   ` Alvin Šipraga
2023-11-17 23:04     ` Luiz Angelo Daros de Luca
2023-11-11 21:51 ` [RFC net-next 4/5] net: dsa: realtek: load switch variants on demand Luiz Angelo Daros de Luca
2023-11-12  3:54   ` kernel test robot
2023-11-14 12:17   ` Alvin Šipraga
2023-11-17 21:14     ` Luiz Angelo Daros de Luca
2023-11-11 21:51 ` [RFC net-next 5/5] net: dsa: realtek: support reset controller Luiz Angelo Daros de Luca

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231111215647.4966-4-luizluca@gmail.com \
    --to=luizluca@gmail.com \
    --cc=alsi@bang-olufsen.dk \
    --cc=andrew@lunn.ch \
    --cc=arinc.unal@arinc9.com \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=krzk+dt@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=pabeni@redhat.com \
    --cc=robh+dt@kernel.org \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.