From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org, konishi.ryusuke@gmail.com,
willy@infradead.org, akpm@linux-foundation.org
Subject: + nilfs2-convert-nilfs_abort_logs-to-use-folios.patch added to mm-nonmm-unstable branch
Date: Tue, 14 Nov 2023 15:22:51 -0800 [thread overview]
Message-ID: <20231114232252.2B015C433CA@smtp.kernel.org> (raw)
The patch titled
Subject: nilfs2: convert nilfs_abort_logs to use folios
has been added to the -mm mm-nonmm-unstable branch. Its filename is
nilfs2-convert-nilfs_abort_logs-to-use-folios.patch
This patch will shortly appear at
https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patches/nilfs2-convert-nilfs_abort_logs-to-use-folios.patch
This patch will later appear in the mm-nonmm-unstable branch at
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/process/submit-checklist.rst when testing your code ***
The -mm tree is included into linux-next via the mm-everything
branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
and is updated there every 2-3 working days
------------------------------------------------------
From: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Subject: nilfs2: convert nilfs_abort_logs to use folios
Date: Tue, 14 Nov 2023 17:44:18 +0900
Use the new folio APIs, saving five hidden calls to compound_head().
Link: https://lkml.kernel.org/r/20231114084436.2755-3-konishi.ryusuke@gmail.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
fs/nilfs2/segment.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
--- a/fs/nilfs2/segment.c~nilfs2-convert-nilfs_abort_logs-to-use-folios
+++ a/fs/nilfs2/segment.c
@@ -1788,7 +1788,7 @@ static void nilfs_end_page_io(struct pag
static void nilfs_abort_logs(struct list_head *logs, int err)
{
struct nilfs_segment_buffer *segbuf;
- struct page *bd_page = NULL, *fs_page = NULL;
+ struct folio *bd_folio = NULL, *fs_folio = NULL;
struct buffer_head *bh;
if (list_empty(logs))
@@ -1798,10 +1798,10 @@ static void nilfs_abort_logs(struct list
list_for_each_entry(bh, &segbuf->sb_segsum_buffers,
b_assoc_buffers) {
clear_buffer_uptodate(bh);
- if (bh->b_page != bd_page) {
- if (bd_page)
- end_page_writeback(bd_page);
- bd_page = bh->b_page;
+ if (bh->b_folio != bd_folio) {
+ if (bd_folio)
+ folio_end_writeback(bd_folio);
+ bd_folio = bh->b_folio;
}
}
@@ -1810,22 +1810,22 @@ static void nilfs_abort_logs(struct list
clear_buffer_async_write(bh);
if (bh == segbuf->sb_super_root) {
clear_buffer_uptodate(bh);
- if (bh->b_page != bd_page) {
- end_page_writeback(bd_page);
- bd_page = bh->b_page;
+ if (bh->b_folio != bd_folio) {
+ folio_end_writeback(bd_folio);
+ bd_folio = bh->b_folio;
}
break;
}
- if (bh->b_page != fs_page) {
- nilfs_end_page_io(fs_page, err);
- fs_page = bh->b_page;
+ if (bh->b_folio != fs_folio) {
+ nilfs_end_folio_io(fs_folio, err);
+ fs_folio = bh->b_folio;
}
}
}
- if (bd_page)
- end_page_writeback(bd_page);
+ if (bd_folio)
+ folio_end_writeback(bd_folio);
- nilfs_end_page_io(fs_page, err);
+ nilfs_end_folio_io(fs_folio, err);
}
static void nilfs_segctor_abort_construction(struct nilfs_sc_info *sci,
_
Patches currently in -mm which might be from willy@infradead.org are
mm-add-folio_zero_tail-and-use-it-in-ext4.patch
mm-add-folio_fill_tail-and-use-it-in-iomap.patch
gfs2-convert-stuffed_readpage-to-stuffed_read_folio.patch
mm-remove-test_set_page_writeback.patch
afs-do-not-test-the-return-value-of-folio_start_writeback.patch
smb-do-not-test-the-return-value-of-folio_start_writeback.patch
mm-return-void-from-folio_start_writeback-and-related-functions.patch
mm-make-mapping_evict_folio-the-preferred-way-to-evict-clean-folios.patch
mm-convert-__do_fault-to-use-a-folio.patch
mm-use-mapping_evict_folio-in-truncate_error_page.patch
mm-convert-soft_offline_in_use_page-to-use-a-folio.patch
mm-convert-isolate_page-to-mf_isolate_folio.patch
mm-remove-invalidate_inode_page.patch
buffer-return-bool-from-grow_dev_folio.patch
buffer-calculate-block-number-inside-folio_init_buffers.patch
buffer-fix-grow_buffers-for-block-size-page_size.patch
buffer-cast-block-to-loff_t-before-shifting-it.patch
buffer-fix-various-functions-for-block-size-page_size.patch
buffer-handle-large-folios-in-__block_write_begin_int.patch
buffer-fix-more-functions-for-block-size-page_size.patch
gfp-include-__gfp_nowarn-in-gfp_nowait.patch
nilfs2-add-nilfs_end_folio_io.patch
nilfs2-convert-nilfs_abort_logs-to-use-folios.patch
nilfs2-convert-nilfs_segctor_complete_write-to-use-folios.patch
nilfs2-convert-nilfs_forget_buffer-to-use-a-folio.patch
nilfs2-convert-to-nilfs_folio_buffers_clean.patch
nilfs2-convert-nilfs_writepage-to-use-a-folio.patch
nilfs2-convert-nilfs_mdt_write_page-to-use-a-folio.patch
nilfs2-convert-to-nilfs_clear_folio_dirty.patch
nilfs2-convert-to-__nilfs_clear_folio_dirty.patch
nilfs2-convert-nilfs_segctor_prepare_write-to-use-folios.patch
nilfs2-convert-nilfs_page_mkwrite-to-use-a-folio.patch
nilfs2-convert-nilfs_mdt_create_block-to-use-a-folio.patch
nilfs2-convert-nilfs_mdt_submit_block-to-use-a-folio.patch
nilfs2-convert-nilfs_gccache_submit_read_data-to-use-a-folio.patch
nilfs2-convert-nilfs_btnode_create_block-to-use-a-folio.patch
nilfs2-convert-nilfs_btnode_submit_block-to-use-a-folio.patch
nilfs2-convert-nilfs_btnode_delete-to-use-a-folio.patch
nilfs2-convert-nilfs_btnode_prepare_change_key-to-use-a-folio.patch
nilfs2-convert-nilfs_btnode_commit_change_key-to-use-a-folio.patch
nilfs2-convert-nilfs_btnode_abort_change_key-to-use-a-folio.patch
reply other threads:[~2023-11-14 23:22 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231114232252.2B015C433CA@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=konishi.ryusuke@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mm-commits@vger.kernel.org \
--cc=willy@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.