From: <gregkh@linuxfoundation.org>
To: hamza.mahfooz@amd.com, alexander.deucher@amd.com,
harry.wentland@amd.com, jerry.zuo@amd.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] Revert "drm/amd/display: Remove v_startup workaround for" failed to apply to 6.1-stable tree
Date: Wed, 15 Nov 2023 13:59:47 -0500 [thread overview]
Message-ID: <2023111547-retouch-screen-0cd8@gregkh> (raw)
The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 63461ea3fb403be0d040be3c88e621b55672e26a
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2023111547-retouch-screen-0cd8@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
63461ea3fb40 ("Revert "drm/amd/display: Remove v_startup workaround for dcn3+"")
3a31e8b89b72 ("drm/amd/display: Remove v_startup workaround for dcn3+")
e95afc1cf7c6 ("drm/amd/display: Enable AdaptiveSync in DC interface")
d5a43956b73b ("drm/amd/display: move dp capability related logic to link_dp_capability")
94dfeaa46925 ("drm/amd/display: move dp phy related logic to link_dp_phy")
630168a97314 ("drm/amd/display: move dp link training logic to link_dp_training")
238debcaebe4 ("drm/amd/display: Use DML for MALL SS and Subvp allocation calculations")
d144b40a4833 ("drm/amd/display: move dc_link_dpia logic to link_dp_dpia")
a28d0bac0956 ("drm/amd/display: move dpcd logic from dc_link_dpcd to link_dpcd")
a98cdd8c4856 ("drm/amd/display: refactor ddc logic from dc_link_ddc to link_ddc")
4370f72e3845 ("drm/amd/display: refactor hpd logic from dc_link to link_hpd")
0e8cf83a2b47 ("drm/amd/display: allow hpo and dio encoder switching during dp retrain test")
7462475e3a06 ("drm/amd/display: move dccg programming from link hwss hpo dp to hwss")
e85d59885409 ("drm/amd/display: use encoder type independent hwss instead of accessing enc directly")
ebf13b72020a ("drm/amd/display: Revert Scaler HCBlank issue workaround")
639f6ad6df7f ("drm/amd/display: Revert Reduce delay when sink device not able to ACK 00340h write")
d5bec4030fd7 ("drm/amd/display: Use DCC meta pitch for MALL allocation requirements")
359bcc904e23 ("drm/amd/display: Fix arithmetic error in MALL size calculations for subvp")
719b59a3fac1 ("drm/amd/display: MALL SS calculations should iterate over all pipes for cursor")
e3aa827e2ab3 ("drm/amd/display: Avoid setting pixel rate divider to N/A")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 63461ea3fb403be0d040be3c88e621b55672e26a Mon Sep 17 00:00:00 2001
From: Hamza Mahfooz <hamza.mahfooz@amd.com>
Date: Thu, 31 Aug 2023 15:17:14 -0400
Subject: [PATCH] Revert "drm/amd/display: Remove v_startup workaround for
dcn3+"
This reverts commit 3a31e8b89b7240d9a17ace8a1ed050bdcb560f9e.
We still need to call dcn20_adjust_freesync_v_startup() for older DCN3+
ASICs. Otherwise, it can cause DP to HDMI 2.1 PCONs to fail to light up.
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2809
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn20/dcn20_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn20/dcn20_fpu.c
index 0989a0152ae8..1bfdf0271fdf 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn20/dcn20_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn20/dcn20_fpu.c
@@ -1099,6 +1099,10 @@ void dcn20_calculate_dlg_params(struct dc *dc,
context->res_ctx.pipe_ctx[i].plane_res.bw.dppclk_khz =
pipes[pipe_idx].clks_cfg.dppclk_mhz * 1000;
context->res_ctx.pipe_ctx[i].pipe_dlg_param = pipes[pipe_idx].pipe.dest;
+ if (context->res_ctx.pipe_ctx[i].stream->adaptive_sync_infopacket.valid)
+ dcn20_adjust_freesync_v_startup(
+ &context->res_ctx.pipe_ctx[i].stream->timing,
+ &context->res_ctx.pipe_ctx[i].pipe_dlg_param.vstartup_start);
pipe_idx++;
}
@@ -1927,7 +1931,6 @@ static bool dcn20_validate_bandwidth_internal(struct dc *dc, struct dc_state *co
int vlevel = 0;
int pipe_split_from[MAX_PIPES];
int pipe_cnt = 0;
- int i = 0;
display_e2e_pipe_params_st *pipes = kzalloc(dc->res_pool->pipe_count * sizeof(display_e2e_pipe_params_st), GFP_ATOMIC);
DC_LOGGER_INIT(dc->ctx->logger);
@@ -1951,15 +1954,6 @@ static bool dcn20_validate_bandwidth_internal(struct dc *dc, struct dc_state *co
dcn20_calculate_wm(dc, context, pipes, &pipe_cnt, pipe_split_from, vlevel, fast_validate);
dcn20_calculate_dlg_params(dc, context, pipes, pipe_cnt, vlevel);
- for (i = 0; i < dc->res_pool->pipe_count; i++) {
- if (!context->res_ctx.pipe_ctx[i].stream)
- continue;
- if (context->res_ctx.pipe_ctx[i].stream->adaptive_sync_infopacket.valid)
- dcn20_adjust_freesync_v_startup(
- &context->res_ctx.pipe_ctx[i].stream->timing,
- &context->res_ctx.pipe_ctx[i].pipe_dlg_param.vstartup_start);
- }
-
BW_VAL_TRACE_END_WATERMARKS();
goto validate_out;
@@ -2232,7 +2226,6 @@ bool dcn21_validate_bandwidth_fp(struct dc *dc,
int vlevel = 0;
int pipe_split_from[MAX_PIPES];
int pipe_cnt = 0;
- int i = 0;
display_e2e_pipe_params_st *pipes = kzalloc(dc->res_pool->pipe_count * sizeof(display_e2e_pipe_params_st), GFP_ATOMIC);
DC_LOGGER_INIT(dc->ctx->logger);
@@ -2261,15 +2254,6 @@ bool dcn21_validate_bandwidth_fp(struct dc *dc,
dcn21_calculate_wm(dc, context, pipes, &pipe_cnt, pipe_split_from, vlevel, fast_validate);
dcn20_calculate_dlg_params(dc, context, pipes, pipe_cnt, vlevel);
- for (i = 0; i < dc->res_pool->pipe_count; i++) {
- if (!context->res_ctx.pipe_ctx[i].stream)
- continue;
- if (context->res_ctx.pipe_ctx[i].stream->adaptive_sync_infopacket.valid)
- dcn20_adjust_freesync_v_startup(
- &context->res_ctx.pipe_ctx[i].stream->timing,
- &context->res_ctx.pipe_ctx[i].pipe_dlg_param.vstartup_start);
- }
-
BW_VAL_TRACE_END_WATERMARKS();
goto validate_out;
reply other threads:[~2023-11-15 18:59 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2023111547-retouch-screen-0cd8@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=alexander.deucher@amd.com \
--cc=hamza.mahfooz@amd.com \
--cc=harry.wentland@amd.com \
--cc=jerry.zuo@amd.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.