From: "Yann E. MORIN" <yann.morin.1998@free.fr>
To: Hanyuan Zhao <hanyuan-z@qq.com>
Cc: Samuel Martin <s.martin49@gmail.com>, buildroot@buildroot.org
Subject: Re: [Buildroot] [PATCH 1/1 RESEND] package/wiringX: add GPIO library wiringX
Date: Sat, 18 Nov 2023 16:11:27 +0100 [thread overview]
Message-ID: <20231118151127.GF996011@scaer> (raw)
In-Reply-To: <tencent_757F73E3FFB48495C31F20C1B8F0CBDBD205@qq.com>
Hanyuan, All,
On 2023-11-18 22:53 +0800, Hanyuan Zhao via buildroot spake thusly:
> wiringX is a cross-platform GPIO interface that allows
> developers to control the GPIO of various platforms with
> generic and uniform functions. By using wiringX, the same
> code will run on all platforms supported by wiringX.
>
> https://github.com/wiringX/wiringX
>
> Signed-off-by: Hanyuan Zhao <hanyuan-z@qq.com>
There is no need to resend, as the patch is still pending for review on
our patchowrk:
https://patchwork.ozlabs.org/project/buildroot/list/
https://patchwork.ozlabs.org/project/buildroot/patch/tencent_0D8E30000E63F8AF28CBDFCD8FFFBE122007@qq.com/
However, if this new iteration has changes from the previous, then;
- it should be marked v2, not RESEND
- the changes fromn the previous iteration should be (briefly) listed
after the three-dash line [0]
> ---
[0] here.
As far as I could see, there was no change between the two iterations,
so I marked this one as not-applicable, and left the initial one open.
Regards,
Yann E. MORIN.
> package/Config.in | 1 +
> ...ed-time-type-error-when-compiling-by.patch | 47 +++++++++++++++++++
> package/wiringx/Config.in | 18 +++++++
> package/wiringx/wiringx.hash | 3 ++
> package/wiringx/wiringx.mk | 12 +++++
> 5 files changed, 81 insertions(+)
> create mode 100644 package/wiringx/0001-Fix-the-undeclared-time-type-error-when-compiling-by.patch
> create mode 100644 package/wiringx/Config.in
> create mode 100644 package/wiringx/wiringx.hash
> create mode 100644 package/wiringx/wiringx.mk
>
> diff --git a/package/Config.in b/package/Config.in
> index 9c037f2ef4..b46bb4654e 100644
> --- a/package/Config.in
> +++ b/package/Config.in
> @@ -654,6 +654,7 @@ endmenu
> source "package/wf111/Config.in"
> source "package/wilc-driver/Config.in"
> source "package/wipe/Config.in"
> + source "package/wiringx/Config.in"
> source "package/xorriso/Config.in"
> source "package/xr819-xradio/Config.in"
> endmenu
> diff --git a/package/wiringx/0001-Fix-the-undeclared-time-type-error-when-compiling-by.patch b/package/wiringx/0001-Fix-the-undeclared-time-type-error-when-compiling-by.patch
> new file mode 100644
> index 0000000000..fe0fd56f82
> --- /dev/null
> +++ b/package/wiringx/0001-Fix-the-undeclared-time-type-error-when-compiling-by.patch
> @@ -0,0 +1,47 @@
> +From 3185311331f8fb90ce5dd9376e8b35bff4bb083f Mon Sep 17 00:00:00 2001
> +From: Hanyuan Zhao <hanyuan-z@qq.com>
> +Date: Sat, 14 Oct 2023 14:46:15 +0800
> +Subject: [PATCH] Fix the undeclared time type error when compiling by
> + buildroot
> +
> +Signed-off-by: Hanyuan Zhao <hanyuan-z@qq.com>
> +---
> + src/wiringx.c | 8 ++++----
> + 1 file changed, 4 insertions(+), 4 deletions(-)
> +
> +diff --git a/src/wiringx.c b/src/wiringx.c
> +index e831caa..b424c5b 100644
> +--- a/src/wiringx.c
> ++++ b/src/wiringx.c
> +@@ -119,8 +119,8 @@ static void delayMicrosecondsHard(unsigned int howLong) {
> + tLong.tv_sec = howLong / 1000000;
> + tLong.tv_usec = howLong % 1000000;
> + #else
> +- tLong.tv_sec = (__time_t)howLong / 1000000;
> +- tLong.tv_usec = (__suseconds_t)howLong % 1000000;
> ++ tLong.tv_sec = (time_t)howLong / 1000000;
> ++ tLong.tv_usec = (suseconds_t)howLong % 1000000;
> + #endif
> + timeradd(&tNow, &tLong, &tEnd);
> +
> +@@ -135,7 +135,7 @@ EXPORT void delayMicroseconds(unsigned int howLong) {
> + long int uSecs = howLong % 1000000;
> + unsigned int wSecs = howLong / 1000000;
> + #else
> +- long int uSecs = (__time_t)howLong % 1000000;
> ++ long int uSecs = (time_t)howLong % 1000000;
> + unsigned int wSecs = howLong / 1000000;
> + #endif
> +
> +@@ -147,7 +147,7 @@ EXPORT void delayMicroseconds(unsigned int howLong) {
> + #ifdef _WIN32
> + sleeper.tv_sec = wSecs;
> + #else
> +- sleeper.tv_sec = (__time_t)wSecs;
> ++ sleeper.tv_sec = (time_t)wSecs;
> + #endif
> + sleeper.tv_nsec = (long)(uSecs * 1000L);
> + nanosleep(&sleeper, NULL);
> +--
> +2.34.1
> +
> diff --git a/package/wiringx/Config.in b/package/wiringx/Config.in
> new file mode 100644
> index 0000000000..04b944b217
> --- /dev/null
> +++ b/package/wiringx/Config.in
> @@ -0,0 +1,18 @@
> +config BR2_PACKAGE_WIRINGX
> + bool "wiringX"
> + help
> + wiringX is a cross-platform GPIO interface that allows
> + developers to control the GPIO of various platforms with
> + generic and uniform functions. By using wiringX, the same
> + code will run on all platforms supported by wiringX.
> +
> + Supported vendors:
> +
> + allwinner = <a10, a31s, h3, h5>
> + amlogic = <s805, s905>
> + broadcom = <bcm2711, bcm2835, bcm2836>
> + nXP = <imx6dqrm, imx6sdlrm>
> + rockchip = <rk3399>
> + samsung = <exynos5422>
> +
> + https://wiringx.org/
> diff --git a/package/wiringx/wiringx.hash b/package/wiringx/wiringx.hash
> new file mode 100644
> index 0000000000..b98e707326
> --- /dev/null
> +++ b/package/wiringx/wiringx.hash
> @@ -0,0 +1,3 @@
> +# Locally computed:
> +sha256 62a0bae8f749ad934f1309cdb9df1dbc79a6ce2abc8c6da11040673564c8fb0b wiringx-54030cd9b68ef895439e1444f418524e16cbb4c1.tar.gz
> +sha256 fab3dd6bdab226f1c08630b1dd917e11fcb4ec5e1e020e2c16f83a0a13863e85 LICENSE
> diff --git a/package/wiringx/wiringx.mk b/package/wiringx/wiringx.mk
> new file mode 100644
> index 0000000000..b72046ab60
> --- /dev/null
> +++ b/package/wiringx/wiringx.mk
> @@ -0,0 +1,12 @@
> +################################################################################
> +#
> +# wiringX
> +#
> +################################################################################
> +
> +WIRINGX_VERSION = 54030cd9b68ef895439e1444f418524e16cbb4c1
> +WIRINGX_SITE = $(call github,wiringX,wiringX,$(WIRINGX_VERSION))
> +WIRINGX_LICENSE = MPL-2.0
> +WIRINGX_LICENSE_FILES = LICENSE
> +
> +$(eval $(cmake-package))
> --
> 2.39.3 (Apple Git-145)
>
> _______________________________________________
> buildroot mailing list
> buildroot@buildroot.org
> https://lists.buildroot.org/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
next prev parent reply other threads:[~2023-11-18 15:11 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-18 14:53 [Buildroot] [PATCH 1/1 RESEND] package/wiringX: add GPIO library wiringX Hanyuan Zhao via buildroot
2023-11-18 15:11 ` Yann E. MORIN [this message]
2023-11-18 15:29 ` hanyuan via buildroot
-- strict thread matches above, loose matches on Subject: below --
2023-11-18 15:31 hanyuan-z via buildroot
2023-11-18 16:20 ` Yann E. MORIN
2023-11-18 16:27 ` hanyuan-z via buildroot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231118151127.GF996011@scaer \
--to=yann.morin.1998@free.fr \
--cc=buildroot@buildroot.org \
--cc=hanyuan-z@qq.com \
--cc=s.martin49@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.