[PATCH 02/11] arm64: dts: qcom: sa8775p: fix USB wakeup interrupt types

[Johan Hovold <johan+linaro@kernel.org>]

The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.

Note that only triggering on rising edges can be used to detect resume
events but not disconnect events.

Fixes: de1001525c1a ("arm64: dts: qcom: sa8775p: add USB nodes")
Cc: Shazad Hussain <quic_shazhuss@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 arch/arm64/boot/dts/qcom/sa8775p.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index b6a93b11cbbd..4b42a329460c 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -1610,8 +1610,8 @@ usb_0: usb@a6f8800 {
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 14 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 15 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 12 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pwr_event",
 					  "dp_hs_phy_irq",
@@ -1697,8 +1697,8 @@ usb_1: usb@a8f8800 {
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 8 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 7 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 7 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 13 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pwr_event",
 					  "dp_hs_phy_irq",
@@ -1760,8 +1760,8 @@ usb_2: usb@a4f8800 {
 			assigned-clock-rates = <19200000>, <200000000>;
 
 			interrupts-extended = <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 10 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 9 IRQ_TYPE_EDGE_RISING>;
+					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "pwr_event",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq";
-- 
2.41.0