From: Saeed Mahameed <saeed@kernel.org>
To: "David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Eric Dumazet <edumazet@google.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>,
netdev@vger.kernel.org, Tariq Toukan <tariqt@nvidia.com>,
Leon Romanovsky <leonro@nvidia.com>
Subject: [net 06/15] net/mlx5e: Tidy up IPsec NAT-T SA discovery
Date: Tue, 21 Nov 2023 17:47:55 -0800 [thread overview]
Message-ID: <20231122014804.27716-7-saeed@kernel.org> (raw)
In-Reply-To: <20231122014804.27716-1-saeed@kernel.org>
From: Leon Romanovsky <leonro@nvidia.com>
IPsec NAT-T packets are UDP encapsulated packets over ESP normal ones.
In case they arrive to RX, the SPI and ESP are located in inner header,
while the check was performed on outer header instead.
That wrong check caused to the situation where received rekeying request
was missed and caused to rekey timeout, which "compensated" this failure
by completing rekeying.
Fixes: d65954934937 ("net/mlx5e: Support IPsec NAT-T functionality")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
.../mellanox/mlx5/core/en_accel/ipsec_fs.c | 22 ++++++++++++++-----
include/linux/mlx5/mlx5_ifc.h | 2 +-
2 files changed, 17 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c
index aeb399d8dae5..7a789061c998 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c
@@ -1212,13 +1212,22 @@ static void setup_fte_esp(struct mlx5_flow_spec *spec)
MLX5_SET(fte_match_param, spec->match_value, outer_headers.ip_protocol, IPPROTO_ESP);
}
-static void setup_fte_spi(struct mlx5_flow_spec *spec, u32 spi)
+static void setup_fte_spi(struct mlx5_flow_spec *spec, u32 spi, bool encap)
{
/* SPI number */
spec->match_criteria_enable |= MLX5_MATCH_MISC_PARAMETERS;
- MLX5_SET_TO_ONES(fte_match_param, spec->match_criteria, misc_parameters.outer_esp_spi);
- MLX5_SET(fte_match_param, spec->match_value, misc_parameters.outer_esp_spi, spi);
+ if (encap) {
+ MLX5_SET_TO_ONES(fte_match_param, spec->match_criteria,
+ misc_parameters.inner_esp_spi);
+ MLX5_SET(fte_match_param, spec->match_value,
+ misc_parameters.inner_esp_spi, spi);
+ } else {
+ MLX5_SET_TO_ONES(fte_match_param, spec->match_criteria,
+ misc_parameters.outer_esp_spi);
+ MLX5_SET(fte_match_param, spec->match_value,
+ misc_parameters.outer_esp_spi, spi);
+ }
}
static void setup_fte_no_frags(struct mlx5_flow_spec *spec)
@@ -1596,8 +1605,9 @@ static int rx_add_rule(struct mlx5e_ipsec_sa_entry *sa_entry)
else
setup_fte_addr6(spec, attrs->saddr.a6, attrs->daddr.a6);
- setup_fte_spi(spec, attrs->spi);
- setup_fte_esp(spec);
+ setup_fte_spi(spec, attrs->spi, attrs->encap);
+ if (!attrs->encap)
+ setup_fte_esp(spec);
setup_fte_no_frags(spec);
setup_fte_upper_proto_match(spec, &attrs->upspec);
@@ -1719,7 +1729,7 @@ static int tx_add_rule(struct mlx5e_ipsec_sa_entry *sa_entry)
switch (attrs->type) {
case XFRM_DEV_OFFLOAD_CRYPTO:
- setup_fte_spi(spec, attrs->spi);
+ setup_fte_spi(spec, attrs->spi, false);
setup_fte_esp(spec);
setup_fte_reg_a(spec);
break;
diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index 90ca63f4bf63..3f7b664d625b 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -621,7 +621,7 @@ struct mlx5_ifc_fte_match_set_misc_bits {
u8 reserved_at_140[0x8];
u8 bth_dst_qp[0x18];
- u8 reserved_at_160[0x20];
+ u8 inner_esp_spi[0x20];
u8 outer_esp_spi[0x20];
u8 reserved_at_1a0[0x60];
};
--
2.42.0
next prev parent reply other threads:[~2023-11-22 1:48 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-22 1:47 [pull request][net 00/15] mlx5 fixes 2023-11-21 Saeed Mahameed
2023-11-22 1:47 ` [net 01/15] net/mlx5e: Honor user choice of IPsec replay window size Saeed Mahameed
2023-11-22 1:47 ` [net 02/15] net/mlx5e: Ensure that IPsec sequence packet number starts from 1 Saeed Mahameed
2023-11-22 1:47 ` [net 03/15] net/mlx5e: Unify esw and normal IPsec status table creation/destruction Saeed Mahameed
2023-11-22 1:47 ` [net 04/15] net/mlx5e: Remove exposure of IPsec RX flow steering struct Saeed Mahameed
2023-11-22 1:47 ` [net 05/15] net/mlx5e: Add IPsec and ASO syndromes check in HW Saeed Mahameed
2023-11-22 1:47 ` Saeed Mahameed [this message]
2023-11-22 1:47 ` [net 07/15] net/mlx5e: Reduce eswitch mode_lock protection context Saeed Mahameed
2023-11-22 1:47 ` [net 08/15] net/mlx5e: Check the number of elements before walk TC rhashtable Saeed Mahameed
2023-11-22 1:47 ` [net 09/15] net/mlx5e: Forbid devlink reload if IPSec rules are offloaded Saeed Mahameed
2023-11-22 9:13 ` Jiri Pirko
2023-11-22 9:35 ` Leon Romanovsky
2023-11-22 9:50 ` Jiri Pirko
2023-11-22 11:28 ` Leon Romanovsky
2023-11-22 12:25 ` Jiri Pirko
2023-11-23 3:53 ` Jakub Kicinski
2023-11-23 6:12 ` Saeed Mahameed
2023-11-23 18:33 ` Leon Romanovsky
2023-11-28 12:02 ` Jiri Pirko
2023-11-28 16:08 ` Leon Romanovsky
2023-11-29 14:51 ` Jiri Pirko
2023-12-04 17:05 ` Leon Romanovsky
2023-12-05 9:30 ` Jiri Pirko
2023-11-22 1:47 ` [net 10/15] net/mlx5e: Disable IPsec offload support if not FW steering Saeed Mahameed
2023-11-22 1:48 ` [net 11/15] net/mlx5e: Fix possible deadlock on mlx5e_tx_timeout_work Saeed Mahameed
2023-11-22 1:48 ` [net 12/15] net/mlx5e: TC, Don't offload post action rule if not supported Saeed Mahameed
2023-11-22 1:48 ` [net 13/15] net/mlx5: Nack sync reset request when HotPlug is enabled Saeed Mahameed
2023-11-22 1:48 ` [net 14/15] net/mlx5e: Check netdev pointer before checking its net ns Saeed Mahameed
2023-11-22 1:48 ` [net 15/15] net/mlx5: Fix a NULL vs IS_ERR() check Saeed Mahameed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231122014804.27716-7-saeed@kernel.org \
--to=saeed@kernel.org \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=leonro@nvidia.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=saeedm@nvidia.com \
--cc=tariqt@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.