From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from ws5-mx01.kavi.com (ws5-mx01.kavi.com [34.193.7.191]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id D1CFAC61D9B for ; Wed, 22 Nov 2023 14:51:36 +0000 (UTC) Received: from lists.oasis-open.org (oasis.ws5.connectedcommunity.org [10.110.1.242]) by ws5-mx01.kavi.com (Postfix) with ESMTP id 278BA22375 for ; Wed, 22 Nov 2023 14:51:36 +0000 (UTC) Received: from lists.oasis-open.org (oasis-open.org [10.110.1.242]) by lists.oasis-open.org (Postfix) with ESMTP id 04AE09868A4 for ; Wed, 22 Nov 2023 14:51:36 +0000 (UTC) Received: from host09.ws5.connectedcommunity.org (host09.ws5.connectedcommunity.org [10.110.1.97]) by lists.oasis-open.org (Postfix) with QMQP id E2C50986898; Wed, 22 Nov 2023 14:51:35 +0000 (UTC) Mailing-List: contact virtio-comment-help@lists.oasis-open.org; run by ezmlm List-ID: Sender: Precedence: bulk List-Post: List-Help: List-Unsubscribe: List-Subscribe: Received: from lists.oasis-open.org (oasis-open.org [10.110.1.242]) by lists.oasis-open.org (Postfix) with ESMTP id D2A51986899 for ; Wed, 22 Nov 2023 14:51:35 +0000 (UTC) X-Virus-Scanned: amavisd-new at kavi.com X-MC-Unique: 6wCPG21DPx6oZK76jgM3Hg-1 X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1700664689; x=1701269489; h=in-reply-to:content-disposition:mime-version:references:message-id :subject:cc:to:from:date:x-gm-message-state:from:to:cc:subject:date :message-id:reply-to; bh=pMPtp3nZeQ1xICyhn4HBo8kj906aGBcHMbmMAA2g/Vk=; b=R78EKeA3vJUjX/T9ro7eX976EuS0zR+lRvCsR5sG1epXWVHnmBfE1sshGCTzY57lL0 92BbiOnzxaGFzFn9QhNTbE/qh1PWyK5OWsHmwnVpbS2adkViGz2wxns+a3PACOy1INdn orQizvM81B6J41hQgWUtzX15HWlwBBjVHhTDicg9b0M9EVAN+sg+tVh8NVy2vj+QdbAD x+xVtVRV+uTnyhuzT59lkeElchc+GzRCWyqon6wSS5jTr2D7e7rqcaZTF+coHc54qdka EJqboet/YqQFtOqL4Dv9rpJV/OSh35VLOlCTZt9iTnv/QJnWw2io2sWYQMib7QdztB6+ V0Vg== X-Gm-Message-State: AOJu0YwGs8Y2K6lLfJAcKzUN4xR6LUg39yzL0W+zGL3VxmK9j+J/45ed K6GgmSgWFgLQLrxMoLC10R6ZthK2r+XmzarlILXnSQXB0VTLp6nJ2/y+MLiWLQPGLGU/QxSM1dJ N1XTh07iam04y0imfvXkl9g52UZxiNtRYPw== X-Received: by 2002:ac2:5159:0:b0:502:f7a4:c31f with SMTP id q25-20020ac25159000000b00502f7a4c31fmr1960196lfd.45.1700664689214; Wed, 22 Nov 2023 06:51:29 -0800 (PST) X-Google-Smtp-Source: AGHT+IEcbS1PN85wguoY8cTpfJme8JEMvhAe2QYn2ydC5icZPuNBBuBgsgV9DWlJqtCI4kUXKqZZjw== X-Received: by 2002:ac2:5159:0:b0:502:f7a4:c31f with SMTP id q25-20020ac25159000000b00502f7a4c31fmr1960172lfd.45.1700664688611; Wed, 22 Nov 2023 06:51:28 -0800 (PST) Date: Wed, 22 Nov 2023 09:51:22 -0500 From: "Michael S. Tsirkin" To: Parav Pandit Cc: "virtio-comment@lists.oasis-open.org" , "cohuck@redhat.com" , "sburla@marvell.com" , Shahaf Shuler , "si-wei.liu@oracle.com" , "xuanzhuo@linux.alibaba.com" , Heng Qi Message-ID: <20231122094431-mutt-send-email-mst@kernel.org> References: <20231110123853.2093309-1-parav@nvidia.com> <20231110123853.2093309-3-parav@nvidia.com> <20231122084105-mutt-send-email-mst@kernel.org> MIME-Version: 1.0 In-Reply-To: X-Mimecast-Spam-Score: 0 X-Mimecast-Originator: redhat.com Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Subject: [virtio-comment] Re: [PATCH v6 2/5] virtio-net: Add flow filter capabilities read commands On Wed, Nov 22, 2023 at 02:10:29PM +0000, Parav Pandit wrote: > > > From: Michael S. Tsirkin > > Sent: Wednesday, November 22, 2023 7:32 PM > > > > On Fri, Nov 10, 2023 at 02:38:50PM +0200, Parav Pandit wrote: > > > The device responds flow filter capabilities using two commands. > > > One command indicates generic flow filter device limits such as number > > > of flow filters, number of flow filter groups, support or multiple > > > transports etc. > > > > > > The second command indicates supported match types, and fields of the > > > packet. > > > > > > Fixes: https://github.com/oasis-tcs/virtio-spec/issues/179 > > > Signed-off-by: Heng Qi > > > Signed-off-by: Parav Pandit > > > > > > --- > > > changelog: > > > v2->v3: > > > - rebased on virtio-1.4 branch > > > - removed reference for flow filter virtqueue > > > v1->v2: > > > - addressed comments from Satananda > > > - added vlan type match field > > > - kept space for types between l2, l3, l4 header match types > > > - renamed mask to mask_supported with shorter width > > > - made more fields reserved for furture > > > - addressed comments from Heng > > > - grammar correction > > > - added field to indicate supported number of actions per flow > > > filter match entry > > > - added missing documentation for max_flow_priorities_per_group > > > v0->v1: > > > - added mask field in the type to indicate supported mask by device > > > and also in later patch to use it to indicate mask on adding > > > flow filter. As a result removed the mask_supported capability > > > field > > > --- > > > device-types/net/description.tex | 208 > > > ++++++++++++++++++++++++++++++- > > > 1 file changed, 206 insertions(+), 2 deletions(-) > > > > > > diff --git a/device-types/net/description.tex > > > b/device-types/net/description.tex > > > index 30220b5..eccd8d6 100644 > > > --- a/device-types/net/description.tex > > > +++ b/device-types/net/description.tex > > > @@ -1173,7 +1173,11 @@ \subsubsection{Flow Filter}\label{sec:Device > > > Types / Network Device / Device Ope > > > > > > The device indicates the flow filter capabilities to the driver. > > > These capabilities include various maximum device limits and > > > -supported packet match fields. > > > +supported packet match fields. These control virtqueue commands are: > > > +\ref{sec:Device Types / Network Device / Device Operation / Control > > > +Virtqueue / Flow Filter / Flow Filter Capabilities Get} and > > > +\ref{sec:Device Types / Network Device / Device Operation / Control > > Virtqueue / Flow Filter / Flow Filter Match Capabilities Get}. > > > > > > The flow filters are grouped using a flow filter group. Each flow > > > filter group has a priority. The device first applies the flow > > > filters of the highest @@ -1224,7 +1228,136 @@ \subsubsection{Flow > > Filter}\label{sec:Device Types / Network Device / Device Ope > > > the flow filters in group_C, the flow filters of next level group_B are > > applied. > > > \end{itemize} > > > > > > -\label{sec:Device Types / Network Device / Device Operation / Control > > > Virtqueue / Setting Promiscuous Mode}%old label for latexdiff > > > +\paragraph{Match Types and Fields}\label{sec:Device Types / Network > > > +Device / Device Operation / Flow Filter / Match Types and Fields} > > > + > > > +\begin{lstlisting} > > > +struct virtio_net_ff_match_type_cap { > > > + le16 type; > > > + u8 mask_supported; > > > + u8 reserved[5]; > > > + le64 fields_bmap; > > > +}; > > > +\end{lstlisting} > > > + > > > +The \field{type} corresponds to following table: > > > + > > > +\begin{tabular}{|l|l|l|} > > > +\hline > > > +Type & Name & Description \\ > > > +\hline \hline > > > +0 & VIRTIO_NET_FF_ETH_HDR & Ethernet header of the packet \\ > > > +\hline > > > +0x1 & VIRTIO_NET_FF_VLAN_TAG_HDR & VLAN tag of the packet \\ > > > +\hline > > > +0x200 & VIRTIO_NET_FF_IPV4_HDR & IPv4 header of the packet \\ > > > +\hline > > > +0x300 & VIRTIO_NET_FF_IPV6_HDR & IPv6 header of the packet \\ > > > +\hline > > > +0x400 & VIRTIO_NET_FF_TCP_HDR & TCP header of the packet \\ > > > +\hline > > > +0x500 & VIRTIO_NET_FF_UDP_HDR & UDP header of the packet \\ > > > +\hline > > > +other & - & reserved \\ > > > +\hline > > > +\end{tabular} > > > + > > > +When the \field{mask_supported} is set, for the specific > > > +\field{type}, the device can perform masking packet fields with the > > > +mask supplied in the flow filter match entry. > > > + > > > +For each \field{type} the \field{fields_bmap} indicates supported > > > +fields of the packet header which can be matched. > > > + > > > +For the \field{type} of VIRTIO_NET_FF_ETH_HDR, header fields are > > > +represented by a bitmap in \field{fields_bmap} are following: > > > + > > > +\begin{tabular}{|l|l|l|} > > > +\hline > > > +Bit & Name & Description \\ > > > +\hline \hline > > > +0 & VIRTIO_NET_FF_DST_MAC & Destination MAC address in the packet \\ > > > +\hline > > > +1 & VIRTIO_NET_FF_SRC_MAC & Source MAC address in the packet \\ > > > +\hline > > > +2 & VIRTIO_NET_FF_ETHER_TYPE & Ether type in the packet \\ > > > +\hline > > > +other & - & reserved \\ > > > +\hline > > > +\end{tabular} > > > + > > > +For the \field{type} of VIRTIO_NET_FF_VLAN_TAG_HDR, VLAN tag fields > > > +are represented by a bitmap in \field{fields_bmap} are following: > > > + > > > +\begin{tabular}{|l|l|l|} > > > +\hline > > > +Bit & Name & Description \\ > > > +\hline \hline > > > +0 & VIRTIO_NET_FF_VLAN_TAG_TCI & Vlan tag TCI 16-bit field \\ > > > +\hline > > > +other & - & reserved \\ > > > +\hline > > > +\end{tabular} > > > + > > > +For the \field{type} of VIRTIO_NET_FF_IPV4_HDR, header fields are > > > +represented by a bitmap in \field{fields_bmap} are following: > > > + > > > +\begin{tabular}{|l|l|l|} > > > +\hline > > > +Bit & Name & Description \\ > > > +\hline \hline > > > +0 & VIRTIO_NET_FF_SRC_IPV4 & Source IPV4 address in the packet \\ > > > +\hline > > > +1 & VIRTIO_NET_FF_DST_IPV4 & Destination IPV4 address in the packet \\ > > > +\hline > > > +other & - & reserved \\ > > > +\hline > > > +\end{tabular} > > > + > > > +For the \field{type} of VIRTIO_NET_FF_IPV6_HDR, header fields are > > > +represented by a bitmap in \field{fields_bmap} are following: > > > + > > > +\begin{tabular}{|l|l|l|} > > > +\hline > > > +Bit & Name & Description \\ > > > +\hline \hline > > > +0 & VIRTIO_NET_FF_SRC_IPV6 & Source IPV6 address in the packet \\ > > > +\hline > > > +1 & VIRTIO_NET_FF_DST_IPV6 & Destination IPV6 address in the packet \\ > > > +\hline > > > +other & - & reserved \\ > > > +\hline > > > +\end{tabular} > > > + > > > +For the \field{type} of VIRTIO_NET_FF_TCP_HDR, header fields are > > > +represented by a bitmap in \field{fields_bmap} are following: > > > + > > > +\begin{tabular}{|l|l|l|} > > > +\hline > > > +Bit & Name & Description \\ > > > +\hline \hline > > > +0 & VIRTIO_NET_FF_SRC_TCP_PORT & Source TCP port in the packet \\ > > > +\hline > > > +1 & VIRTIO_NET_FF_DST_TCP_PORT & Destination TCP port in the packet > > \\ > > > +\hline > > > +other & - & reserved \\ > > > +\hline > > > +\end{tabular} > > > + > > > +For the \field{type} of VIRTIO_NET_FF_UDP_HDR, header fields are > > > +represented by a bitmap in \field{fields_bmap} are following: > > > + > > > +\begin{tabular}{|l|l|l|} > > > +\hline > > > +Bit & Name & Description \\ > > > +\hline \hline > > > +0 & VIRTIO_NET_FF_SRC_UDP_PORT & Source UDP port in the packet \\ > > > +\hline > > > +1 & VIRTIO_NET_FF_DST_UDP_PORT & Destination UDP port in the packet > > \\ > > > +\hline > > > +other & - & reserved \\ > > > +\hline > > > +\end{tabular} > > > + > > > > This is such an elaborate structure to report just 12 read only bits. > > Please let's just follow the example of le32 supported_tunnel_types and add > > l32 supported_flow_control. > > > supported_tunnel_types was let go because cvq is efficient. > None of these fields are needed for init time configuration of the driver before DRIVER_OK. I really basically disagree. Whether control flow is supported can easily influence how many VQs are needed. > > It is a very narrow view of 12 bits. It is going to grow and many. > This is far more structured for each type done here. > > > > > After you were trying to add kilobytes to megabytes of memory - I see little > > reason to save 12 RO bits that can be shared by any number of VFs. > > > Completely wrong reason and very late review and also does not align with every other command we did. which other command? hash and rss are like this: capability in config space config through cvq. For the same reason. > > However, I do think we should create an option to access config space over > > DMA (preferably admin commands). Let's add this quickly and then we don't > > need to worry about legacy guests accessing flow filter through MMIO. > > CVQ is already there as single interface forget and set for rss, rss context, vq moderation, statistics, flow filter caps and more. > No reason to bifurcate. The reason is so that we have a single consistent view where e.g. you want to provision a device with a specific capability you just specify how its config space looks. If you start shuffling capabilities off to VQs that will be much much harder. > I won't be able to absorb this comment of DMA interface. > If I discuss further, I will repeat the whole document [1] and I will avoid that now. > > [1] https://docs.google.com/document/d/1Iyn-l3Nm0yls3pZaul4lZiVj8x1s73Ed6rOsmn6LfXc/edit#heading=h.qexbtyc2jpwr I really worry about how provisioning will work. And I do not at all cherish replicating all of these query capability commands for provisioning. Instead, I propose commands for config space access to solve everything in one go, for all device types. -- MST This publicly archived list offers a means to provide input to the OASIS Virtual I/O Device (VIRTIO) TC. In order to verify user consent to the Feedback License terms and to minimize spam in the list archive, subscription is required before posting. Subscribe: virtio-comment-subscribe@lists.oasis-open.org Unsubscribe: virtio-comment-unsubscribe@lists.oasis-open.org List help: virtio-comment-help@lists.oasis-open.org List archive: https://lists.oasis-open.org/archives/virtio-comment/ Feedback License: https://www.oasis-open.org/who/ipr/feedback_license.pdf List Guidelines: https://www.oasis-open.org/policies-guidelines/mailing-lists Committee: https://www.oasis-open.org/committees/virtio/ Join OASIS: https://www.oasis-open.org/join/