Hi Marek,

> Driver does not currently initialize the smi_addr field, but instead
> keeps the default value. This leads to issues on systems with
> different hardware configuration. We can fix this problem by reading
> the SMI address from device tree.
> 
> Signed-off-by: Marek Mojík <marek.mojik@nic.cz>
> ---
>  drivers/net/mv88e6xxx.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/net/mv88e6xxx.c b/drivers/net/mv88e6xxx.c
> index c073f81e72..4636dbf156 100644
> --- a/drivers/net/mv88e6xxx.c
> +++ b/drivers/net/mv88e6xxx.c
> @@ -753,6 +753,12 @@ static int mv88e6xxx_probe(struct udevice *dev)
>  		return -ENODEV;
>  	}
>  
> +	priv->smi_addr = dev_read_addr(dev);
> +	if (priv->smi_addr == FDT_ADDR_T_NONE) {
> +		dev_err(dev, "Invalid or missing SMI address\n");
> +		return -EINVAL;
> +	}
> +
>  	/* probe internal mdio bus */
>  	ret = mv88e6xxx_probe_mdio(dev);
>  	if (ret)

I've posted some time ago patches for this driver:

https://patchwork.ozlabs.org/project/uboot/cover/20230601100005.2216345-1-lukma@denx.de/

Unfortunately, those were not pulled...

Maybe you would find fix for your issue, or prepare new version of it?


Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de