From: Lee Jones <lee@kernel.org>
To: Dmitry Rokosov <ddrokosov@salutedevices.com>
Cc: pavel@ucw.cz, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
andy.shevchenko@gmail.com, kernel@sberdevices.ru,
rockosov@gmail.com, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-leds@vger.kernel.org
Subject: Re: [PATCH v4 02/11] leds: aw200xx: support HWEN hardware control
Date: Thu, 23 Nov 2023 15:57:44 +0000 [thread overview]
Message-ID: <20231123155744.GE1354538@google.com> (raw)
In-Reply-To: <20231121202835.28152-3-ddrokosov@salutedevices.com>
On Tue, 21 Nov 2023, Dmitry Rokosov wrote:
> HWEN is hardware control, which is used for enable/disable aw200xx chip.
> It's high active, internally pulled down to GND.
>
> After HWEN pin set high the chip begins to load the OTP information,
> which takes 200us to complete. About 200us wait time is needed for
> internal oscillator startup and display SRAM initialization. After
> display SRAM initialization, the registers in page 1 to page 5 can be
> configured via i2c interface.
>
> Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> ---
> drivers/leds/leds-aw200xx.c | 33 +++++++++++++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
>
> diff --git a/drivers/leds/leds-aw200xx.c b/drivers/leds/leds-aw200xx.c
> index 842a22087b16..7762b3a132ac 100644
> --- a/drivers/leds/leds-aw200xx.c
> +++ b/drivers/leds/leds-aw200xx.c
> @@ -10,6 +10,7 @@
> #include <linux/bitfield.h>
> #include <linux/bits.h>
> #include <linux/container_of.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/i2c.h>
> #include <linux/leds.h>
> #include <linux/mod_devicetable.h>
> @@ -116,6 +117,7 @@ struct aw200xx {
> struct mutex mutex;
> u32 num_leds;
> u32 display_rows;
> + struct gpio_desc *hwen;
> struct aw200xx_led leds[] __counted_by(num_leds);
> };
>
> @@ -358,6 +360,25 @@ static int aw200xx_chip_check(const struct aw200xx *const chip)
> return 0;
> }
>
> +static void aw200xx_enable(const struct aw200xx *const chip)
> +{
> + gpiod_set_value_cansleep(chip->hwen, 1);
> +
> + /*
> + * After HWEN pin set high the chip begins to load the OTP information,
> + * which takes 200us to complete. About 200us wait time is needed for
> + * internal oscillator startup and display SRAM initialization. After
> + * display SRAM initialization, the registers in page1 to page5 can be
> + * configured via i2c interface.
> + */
> + fsleep(400);
> +}
> +
> +static void aw200xx_disable(const struct aw200xx *const chip)
> +{
> + return gpiod_set_value_cansleep(chip->hwen, 0);
> +}
> +
> static int aw200xx_probe_fw(struct device *dev, struct aw200xx *chip)
> {
> struct fwnode_handle *child;
> @@ -517,6 +538,14 @@ static int aw200xx_probe(struct i2c_client *client)
> if (IS_ERR(chip->regmap))
> return PTR_ERR(chip->regmap);
>
> + chip->hwen = devm_gpiod_get_optional(&client->dev, "enable",
> + GPIOD_OUT_HIGH);
> + if (IS_ERR(chip->hwen))
> + return dev_err_probe(&client->dev, PTR_ERR(chip->hwen),
> + "Cannot get enable gpio");
Nit: "GPIO"
> +
> + aw200xx_enable(chip);
> +
> ret = aw200xx_chip_check(chip);
> if (ret)
> return ret;
> @@ -537,6 +566,9 @@ static int aw200xx_probe(struct i2c_client *client)
> ret = aw200xx_chip_init(chip);
>
> out_unlock:
> + if (ret)
> + aw200xx_disable(chip);
> +
> mutex_unlock(&chip->mutex);
> return ret;
> }
> @@ -546,6 +578,7 @@ static void aw200xx_remove(struct i2c_client *client)
> struct aw200xx *chip = i2c_get_clientdata(client);
>
> aw200xx_chip_reset(chip);
> + aw200xx_disable(chip);
> mutex_destroy(&chip->mutex);
> }
>
> --
> 2.36.0
>
--
Lee Jones [李琼斯]
next prev parent reply other threads:[~2023-11-23 15:57 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-21 20:28 [PATCH v4 00/11] leds: aw200xx: several driver updates Dmitry Rokosov
2023-11-21 20:28 ` [PATCH v4 01/11] leds: aw200xx: fix write to DIM parameter Dmitry Rokosov
2023-11-21 20:28 ` [PATCH v4 02/11] leds: aw200xx: support HWEN hardware control Dmitry Rokosov
2023-11-23 15:57 ` Lee Jones [this message]
2023-11-21 20:28 ` [PATCH v4 03/11] dt-bindings: leds: aw200xx: introduce optional enable-gpios property Dmitry Rokosov
2023-11-21 20:28 ` [PATCH v4 04/11] leds: aw200xx: calculate dts property display_rows in the driver Dmitry Rokosov
2023-11-23 16:32 ` Lee Jones
2023-11-24 9:41 ` Dmitry Rokosov
2023-11-27 8:57 ` Lee Jones
2023-11-27 11:41 ` Dmitry Rokosov
2023-11-21 20:28 ` [PATCH v4 05/11] dt-bindings: leds: aw200xx: remove property "awinic,display-rows" Dmitry Rokosov
2023-11-21 20:28 ` [PATCH v4 06/11] leds: aw200xx: add delay after software reset Dmitry Rokosov
2023-11-23 16:38 ` Lee Jones
2023-11-24 9:37 ` Dmitry Rokosov
2023-11-27 9:14 ` Lee Jones
2023-11-21 20:28 ` [PATCH v4 07/11] leds: aw200xx: enable disable_locking flag in regmap config Dmitry Rokosov
2023-11-21 20:28 ` [PATCH v4 08/11] leds: aw200xx: improve autodim calculation method Dmitry Rokosov
2023-11-21 20:28 ` [PATCH v4 09/11] leds: aw200xx: add support for aw20108 device Dmitry Rokosov
2023-11-23 16:44 ` Lee Jones
2023-11-21 20:28 ` [PATCH v4 10/11] dt-bindings: leds: awinic,aw200xx: add AW20108 device Dmitry Rokosov
2023-11-21 20:28 ` [PATCH v4 11/11] dt-bindings: leds: aw200xx: fix led pattern and add reg constraints Dmitry Rokosov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231123155744.GE1354538@google.com \
--to=lee@kernel.org \
--cc=andy.shevchenko@gmail.com \
--cc=conor+dt@kernel.org \
--cc=ddrokosov@salutedevices.com \
--cc=devicetree@vger.kernel.org \
--cc=kernel@sberdevices.ru \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=robh+dt@kernel.org \
--cc=rockosov@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.