Re: [PATCH 2/2] media: dt-bindings: Use bus-types definitions from video-interfaces.h

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Fabio,

Thank you for the patch.

On Sun, Nov 26, 2023 at 09:53:20AM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <festevam@denx.de>
> 
> To improve readability, replace hardcoding numerical constants with the
> corresponding definitions from video-interfaces.h.
> 
> Based on commit c4cfd47eb4ac ("media: dt-bindings: Use new video interface
> bus type macros in examples").
> 
> Signed-off-by: Fabio Estevam <festevam@denx.de>
> ---
>  .../devicetree/bindings/display/bridge/analogix,anx7625.yaml  | 3 ++-
>  .../devicetree/bindings/media/i2c/toshiba,tc358746.yaml       | 3 ++-
>  Documentation/devicetree/bindings/media/microchip,csi2dc.yaml | 4 +++-
>  .../devicetree/bindings/media/starfive,jh7110-camss.yaml      | 4 +++-
>  .../devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml       | 3 ++-
>  5 files changed, 12 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> index a1ed1004651b..e18cc0e8a520 100644
> --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> @@ -132,6 +132,7 @@ additionalProperties: false
>  examples:
>    - |
>      #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/media/video-interfaces.h>
>  
>      i2c {
>          #address-cells = <1>;
> @@ -157,7 +158,7 @@ examples:
>                      reg = <0>;
>                      anx7625_in: endpoint {
>                          remote-endpoint = <&mipi_dsi>;
> -                        bus-type = <7>;

7 seems to have been a mistake, as this is a DSI endpoint, not a DPI
endpoint.

> +                        bus-type = <MEDIA_BUS_TYPE_DPI>;
>                          data-lanes = <0 1 2 3>;
>                      };
>                  };
> diff --git a/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml b/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml
> index 1c476b635b69..9e1874946017 100644
> --- a/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml
> @@ -129,6 +129,7 @@ additionalProperties: false
>  examples:
>    - |
>      #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/media/video-interfaces.h>
>  
>      i2c {
>        #address-cells = <1>;
> @@ -161,7 +162,7 @@ examples:
>                remote-endpoint = <&sensor_out>;
>                hsync-active = <0>;
>                vsync-active = <0>;
> -              bus-type = <5>;
> +              bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
>              };
>            };
>  
> diff --git a/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml b/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml
> index b3a345fc6464..2e694479d82d 100644
> --- a/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml
> +++ b/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml
> @@ -142,6 +142,8 @@ examples:
>    # Example for connecting to a parallel sensor controller block (video pipe)
>    # and the input is received from Synopsys IDI interface
>    - |
> +    #include <dt-bindings/media/video-interfaces.h>
> +
>      csi2dc@e1404000 {
>          compatible = "microchip,sama7g5-csi2dc";
>          reg = <0xe1404000 0x500>;
> @@ -154,7 +156,7 @@ examples:
>                 port@0 {
>                         reg = <0>; /* must be 0, first child port */
>                         csi2dc_in: endpoint { /* input from IDI interface */
> -                               bus-type = <4>; /* MIPI CSI2 D-PHY */
> +                               bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
>                                 remote-endpoint = <&csi2host_out>;
>                         };
>                 };
> diff --git a/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml b/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
> index c66586d90fa2..4964e59c3ae3 100644
> --- a/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
> +++ b/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
> @@ -120,6 +120,8 @@ additionalProperties: false
>  
>  examples:
>    - |
> +    #include <dt-bindings/media/video-interfaces.h>
> +
>      isp@19840000 {
>          compatible = "starfive,jh7110-camss";
>          reg = <0x19840000 0x10000>,
> @@ -161,7 +163,7 @@ examples:
>                  reg = <0>;
>                  vin_from_sc2235: endpoint {
>                      remote-endpoint = <&sc2235_to_vin>;
> -                    bus-type = <5>;
> +                    bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
>                      bus-width = <8>;
>                      data-shift = <2>;
>                      hsync-active = <1>;
> diff --git a/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml b/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml
> index f762fdc05e4d..5fdb9ae758e3 100644
> --- a/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml
> +++ b/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml
> @@ -58,6 +58,7 @@ additionalProperties: false
>  
>  examples:
>    - |
> +    #include <dt-bindings/media/video-interfaces.h>
>      #include <dt-bindings/soc/ti,sci_pm_domain.h>
>  
>      ti_csi2rx0: ticsi2rx@4500000 {
> @@ -90,7 +91,7 @@ examples:
>  
>                      csi2rx0_in_sensor: endpoint {
>                          remote-endpoint = <&csi2_cam0>;
> -                        bus-type = <4>; /* CSI2 DPHY. */
> +                        bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
>                          clock-lanes = <0>;
>                          data-lanes = <1 2>;
>                      };

-- 
Regards,

Laurent Pinchart