All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jisheng Zhang <jszhang@kernel.org>
To: Conor Dooley <conor@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Emil Renner Berthing <kernel@esmil.dk>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>
Cc: linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org
Subject: [PATCH v2 0/3] riscv: dts: starfive: add Milkv Mars board device tree
Date: Sat,  2 Dec 2023 23:33:50 +0800	[thread overview]
Message-ID: <20231202153353.635-1-jszhang@kernel.org> (raw)

The Milkv Mars is a development board based on the Starfive JH7110 SoC.
The board features:

- JH7110 SoC
- 1/2/4/8 GiB LPDDR4 DRAM
- AXP15060 PMIC
- 40 pin GPIO header
- 3x USB 3.0 host port
- 1x USB 2.0 host port
- 1x M.2 E-Key
- 1x eMMC slot
- 1x MicroSD slot
- 1x QSPI Flash
- 1x 1Gbps Ethernet port
- 1x HDMI port
- 1x 2-lane DSI and 1x 4-lane DSI
- 1x 2-lane CSI

patch1 adds 'cpus' label
patch2 adds "milkv,mars" board dt-binding
patch3 adds the devicetree file describing the currently supported
features:
Namely PMIC, UART, I2C, GPIO, SD card, QSPI Flash, eMMC and Ethernet.

Since v1:
 - add two new patches which add "cpus" label and board dt-binding
 - adopt Krzysztof's suggestions, thanks

Hi Conor,

I see you have sent a patch which moves the timebase-frequency property
to soc dtsi, but this series doesn't rebase on that. I can update it
once your patch is merged.

Thanks

Jisheng Zhang (3):
  riscv: dts: starfive: add 'cpus' label to jh7110 and jh7100 soc dtsi
  dt-bindings: riscv: starfive: add Milkv Mars board
  riscv: dts: starfive: add Milkv Mars board device tree

 .../devicetree/bindings/riscv/starfive.yaml   |   1 +
 arch/riscv/boot/dts/starfive/Makefile         |   1 +
 arch/riscv/boot/dts/starfive/jh7100.dtsi      |   2 +-
 .../boot/dts/starfive/jh7110-milkv-mars.dts   | 637 ++++++++++++++++++
 arch/riscv/boot/dts/starfive/jh7110.dtsi      |   2 +-
 5 files changed, 641 insertions(+), 2 deletions(-)
 create mode 100644 arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts

-- 
2.42.0


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

WARNING: multiple messages have this Message-ID (diff)
From: Jisheng Zhang <jszhang@kernel.org>
To: Conor Dooley <conor@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Emil Renner Berthing <kernel@esmil.dk>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>
Cc: linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org
Subject: [PATCH v2 0/3] riscv: dts: starfive: add Milkv Mars board device tree
Date: Sat,  2 Dec 2023 23:33:50 +0800	[thread overview]
Message-ID: <20231202153353.635-1-jszhang@kernel.org> (raw)

The Milkv Mars is a development board based on the Starfive JH7110 SoC.
The board features:

- JH7110 SoC
- 1/2/4/8 GiB LPDDR4 DRAM
- AXP15060 PMIC
- 40 pin GPIO header
- 3x USB 3.0 host port
- 1x USB 2.0 host port
- 1x M.2 E-Key
- 1x eMMC slot
- 1x MicroSD slot
- 1x QSPI Flash
- 1x 1Gbps Ethernet port
- 1x HDMI port
- 1x 2-lane DSI and 1x 4-lane DSI
- 1x 2-lane CSI

patch1 adds 'cpus' label
patch2 adds "milkv,mars" board dt-binding
patch3 adds the devicetree file describing the currently supported
features:
Namely PMIC, UART, I2C, GPIO, SD card, QSPI Flash, eMMC and Ethernet.

Since v1:
 - add two new patches which add "cpus" label and board dt-binding
 - adopt Krzysztof's suggestions, thanks

Hi Conor,

I see you have sent a patch which moves the timebase-frequency property
to soc dtsi, but this series doesn't rebase on that. I can update it
once your patch is merged.

Thanks

Jisheng Zhang (3):
  riscv: dts: starfive: add 'cpus' label to jh7110 and jh7100 soc dtsi
  dt-bindings: riscv: starfive: add Milkv Mars board
  riscv: dts: starfive: add Milkv Mars board device tree

 .../devicetree/bindings/riscv/starfive.yaml   |   1 +
 arch/riscv/boot/dts/starfive/Makefile         |   1 +
 arch/riscv/boot/dts/starfive/jh7100.dtsi      |   2 +-
 .../boot/dts/starfive/jh7110-milkv-mars.dts   | 637 ++++++++++++++++++
 arch/riscv/boot/dts/starfive/jh7110.dtsi      |   2 +-
 5 files changed, 641 insertions(+), 2 deletions(-)
 create mode 100644 arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts

-- 
2.42.0


             reply	other threads:[~2023-12-02 15:46 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-12-02 15:33 Jisheng Zhang [this message]
2023-12-02 15:33 ` [PATCH v2 0/3] riscv: dts: starfive: add Milkv Mars board device tree Jisheng Zhang
2023-12-02 15:33 ` [PATCH v2 1/3] riscv: dts: starfive: add 'cpus' label to jh7110 and jh7100 soc dtsi Jisheng Zhang
2023-12-02 15:33   ` Jisheng Zhang
2023-12-02 15:33 ` [PATCH v2 2/3] dt-bindings: riscv: starfive: add Milkv Mars board Jisheng Zhang
2023-12-02 15:33   ` Jisheng Zhang
2023-12-03 16:36   ` Krzysztof Kozlowski
2023-12-03 16:36     ` Krzysztof Kozlowski
2023-12-02 15:33 ` [PATCH v2 3/3] riscv: dts: starfive: add Milkv Mars board device tree Jisheng Zhang
2023-12-02 15:33   ` Jisheng Zhang
2023-12-02 22:07 ` [PATCH v2 0/3] " Emil Renner Berthing
2023-12-02 22:07   ` Emil Renner Berthing
2024-01-10 13:53   ` Conor Dooley
2024-01-10 13:53     ` Conor Dooley
2024-01-10 13:57     ` Jisheng Zhang
2024-01-10 13:57       ` Jisheng Zhang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231202153353.635-1-jszhang@kernel.org \
    --to=jszhang@kernel.org \
    --cc=aou@eecs.berkeley.edu \
    --cc=conor@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@esmil.dk \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.