All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: syed.hassan@amd.com,Roman.Li@amd.com,alexander.deucher@amd.com,daniel.wheeler@amd.com,hamza.mahfooz@amd.com,nicholas.kazlauskas@amd.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] drm/amd/display: Fix some HostVM parameters in DML" failed to apply to 6.1-stable tree
Date: Sun, 03 Dec 2023 14:22:05 +0100	[thread overview]
Message-ID: <2023120305-fervor-specks-e81f@gregkh> (raw)


The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x a2ab248d94f5af2c609c8c3329875f92324782c5
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2023120305-fervor-specks-e81f@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..

Possible dependencies:

a2ab248d94f5 ("drm/amd/display: Fix some HostVM parameters in DML")
cab667a87133 ("drm/amd/display: Feed SR and Z8 watermarks into DML2 for DCN35")
7966f319c66d ("drm/amd/display: Introduce DML2")
6e2c4941ce0c ("drm/amd/display: Move dml code under CONFIG_DRM_AMD_DC_FP guard")
c51d87202d1f ("drm/amd/display: do not attempt ODM power optimization if minimal transition doesn't exist")
88ca2f8a962e ("drm/amd/display: clean up one inconsistent indenting")
1cb87e048975 ("drm/amd/display: Add DCN35 blocks to Makefile")
69cc1864c99a ("drm/amd/display: Add DCN35 DML")
39d39a019657 ("drm/amd/display: switch to new ODM policy for windowed MPO ODM support")
0b9dc439f404 ("drm/amd/display: Write flip addr to scratch reg for subvp")
96182df99dad ("drm/amd/display: Enable runtime register offset init for DCN32 DMUB")
ca030d83f53b ("drm/amd/display: always acquire MPO pipe for every blending tree")
71ba6b577a35 ("drm/amd/display: Add interface to enable DPIA trace")
75bd42fd2e8e ("drm/amd/display: Prevent invalid pipe connections")
da915efaa213 ("drm/amd/display: ABM pause toggle")
c35b6ea8f2ec ("drm/amd/display: Set minimum requirement for using PSR-SU on Rembrandt")
bbe4418f22b9 ("drm/amd/display: Include CSC updates in new fast update path")
33e82119cfb2 ("drm/amd/display: Only use ODM2:1 policy for high pixel rate displays")
0baae6246307 ("drm/amd/display: Refactor fast update to use new HWSS build sequence")
24e461e84f1c ("drm/amd/display: add ODM case when looking for first split pipe")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From a2ab248d94f5af2c609c8c3329875f92324782c5 Mon Sep 17 00:00:00 2001
From: Taimur Hassan <syed.hassan@amd.com>
Date: Fri, 10 Nov 2023 10:24:20 -0500
Subject: [PATCH] drm/amd/display: Fix some HostVM parameters in DML

[Why]
A number of DML parameters related to HostVM were either missing or
being set incorrectly, which may cause inaccuracies in calculating
margins and determining BW limitations.

[How]
Correct these values where needed and populate the missing values.

Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c
index 21c17d3296a3..39cf1ae3a3e1 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c
@@ -330,6 +330,39 @@ void dcn35_update_bw_bounding_box_fpu(struct dc *dc,
 	dml_init_instance(&dc->dml, &dcn3_5_soc, &dcn3_5_ip,
 				DML_PROJECT_DCN31);
 
+	/*copy to dml2, before dml2_create*/
+	if (clk_table->num_entries > 2) {
+
+		for (i = 0; i < clk_table->num_entries; i++) {
+			dc->dml2_options.bbox_overrides.clks_table.num_states =
+				clk_table->num_entries;
+			dc->dml2_options.bbox_overrides.clks_table.clk_entries[i].dcfclk_mhz =
+				clock_limits[i].dcfclk_mhz;
+			dc->dml2_options.bbox_overrides.clks_table.clk_entries[i].fclk_mhz =
+				clock_limits[i].fabricclk_mhz;
+			dc->dml2_options.bbox_overrides.clks_table.clk_entries[i].dispclk_mhz =
+				clock_limits[i].dispclk_mhz;
+			dc->dml2_options.bbox_overrides.clks_table.clk_entries[i].dppclk_mhz =
+				clock_limits[i].dppclk_mhz;
+			dc->dml2_options.bbox_overrides.clks_table.clk_entries[i].socclk_mhz =
+				clock_limits[i].socclk_mhz;
+			dc->dml2_options.bbox_overrides.clks_table.clk_entries[i].memclk_mhz =
+				clk_table->entries[i].memclk_mhz * clk_table->entries[i].wck_ratio;
+			dc->dml2_options.bbox_overrides.clks_table.num_entries_per_clk.num_dcfclk_levels =
+				clk_table->num_entries;
+			dc->dml2_options.bbox_overrides.clks_table.num_entries_per_clk.num_fclk_levels =
+				clk_table->num_entries;
+			dc->dml2_options.bbox_overrides.clks_table.num_entries_per_clk.num_dispclk_levels =
+				clk_table->num_entries;
+			dc->dml2_options.bbox_overrides.clks_table.num_entries_per_clk.num_dppclk_levels =
+				clk_table->num_entries;
+			dc->dml2_options.bbox_overrides.clks_table.num_entries_per_clk.num_socclk_levels =
+				clk_table->num_entries;
+			dc->dml2_options.bbox_overrides.clks_table.num_entries_per_clk.num_memclk_levels =
+				clk_table->num_entries;
+		}
+	}
+
 	/* Update latency values */
 	dc->dml2_options.bbox_overrides.dram_clock_change_latency_us = dcn3_5_soc.dram_clock_change_latency_us;
 
diff --git a/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c b/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c
index 48caa34a5ce7..fa8fe5bf7e57 100644
--- a/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c
+++ b/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c
@@ -1057,9 +1057,12 @@ void map_dc_state_into_dml_display_cfg(struct dml2_context *dml2, struct dc_stat
 	}
 
 	//Generally these are set by referencing our latest BB/IP params in dcn32_resource.c file
-	dml_dispcfg->plane.GPUVMEnable = true;
-	dml_dispcfg->plane.GPUVMMaxPageTableLevels = 4;
-	dml_dispcfg->plane.HostVMEnable = false;
+	dml_dispcfg->plane.GPUVMEnable = dml2->v20.dml_core_ctx.ip.gpuvm_enable;
+	dml_dispcfg->plane.GPUVMMaxPageTableLevels = dml2->v20.dml_core_ctx.ip.gpuvm_max_page_table_levels;
+	dml_dispcfg->plane.HostVMEnable = dml2->v20.dml_core_ctx.ip.hostvm_enable;
+	dml_dispcfg->plane.HostVMMaxPageTableLevels = dml2->v20.dml_core_ctx.ip.hostvm_max_page_table_levels;
+	if (dml2->v20.dml_core_ctx.ip.hostvm_enable)
+		dml2->v20.dml_core_ctx.policy.AllowForPStateChangeOrStutterInVBlankFinal = dml_prefetch_support_uclk_fclk_and_stutter;
 
 	dml2_populate_pipe_to_plane_index_mapping(dml2, context);
 


             reply	other threads:[~2023-12-03 13:22 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-12-03 13:22 gregkh [this message]
  -- strict thread matches above, loose matches on Subject: below --
2024-01-27 23:11 FAILED: patch "[PATCH] drm/amd/display: Fix some HostVM parameters in DML" failed to apply to 6.1-stable tree gregkh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2023120305-fervor-specks-e81f@gregkh \
    --to=gregkh@linuxfoundation.org \
    --cc=Roman.Li@amd.com \
    --cc=alexander.deucher@amd.com \
    --cc=daniel.wheeler@amd.com \
    --cc=hamza.mahfooz@amd.com \
    --cc=nicholas.kazlauskas@amd.com \
    --cc=stable@vger.kernel.org \
    --cc=syed.hassan@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.