All of lore.kernel.org
 help / color / mirror / Atom feed
From: Oded Gabbay <ogabbay@kernel.org>
To: dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Cc: Tomer Tayar <ttayar@habana.ai>
Subject: [PATCH 5/5] accel/habanalabs/gaudi2: avoid overriding existing undefined opcode data
Date: Thu,  7 Dec 2023 14:24:44 +0200	[thread overview]
Message-ID: <20231207122444.50512-5-ogabbay@kernel.org> (raw)
In-Reply-To: <20231207122444.50512-1-ogabbay@kernel.org>

From: Tomer Tayar <ttayar@habana.ai>

Part of the undefined opcode data is updated in
gaudi2_handle_qman_err_generic() and some in
handle_lower_qman_data_on_err().
However, the 'write_enable' flag is checked only in
gaudi2_handle_qman_err_generic(), and information of more than a single
error can be mixed there.

Moreover, handle_lower_qman_data_on_err() is called only for the lower
QMAN, so for an error in the upper QMAN there is only a partial info.

Move all the data update to be done in a single place, protected by the
'write_enable' flag.
As mainly the lower QMAN's info is interesting, avoid saving the partial
info for the upper QMAN.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
---
 drivers/accel/habanalabs/gaudi2/gaudi2.c | 40 +++++++++++-------------
 1 file changed, 19 insertions(+), 21 deletions(-)

diff --git a/drivers/accel/habanalabs/gaudi2/gaudi2.c b/drivers/accel/habanalabs/gaudi2/gaudi2.c
index f81b57649b00..e0e5615ef9b0 100644
--- a/drivers/accel/habanalabs/gaudi2/gaudi2.c
+++ b/drivers/accel/habanalabs/gaudi2/gaudi2.c
@@ -7858,10 +7858,11 @@ static bool gaudi2_handle_ecc_event(struct hl_device *hdev, u16 event_type,
 	return !!ecc_data->is_critical;
 }
 
-static void handle_lower_qman_data_on_err(struct hl_device *hdev, u64 qman_base, u64 event_mask)
+static void handle_lower_qman_data_on_err(struct hl_device *hdev, u64 qman_base, u32 engine_id)
 {
-	u32 lo, hi, cq_ptr_size, cp_sts;
+	struct undefined_opcode_info *undef_opcode = &hdev->captured_err_info.undef_opcode;
 	u64 cq_ptr, cp_current_inst;
+	u32 lo, hi, cq_size, cp_sts;
 	bool is_arc_cq;
 
 	cp_sts = RREG32(qman_base + QM_CP_STS_4_OFFSET);
@@ -7871,12 +7872,12 @@ static void handle_lower_qman_data_on_err(struct hl_device *hdev, u64 qman_base,
 		lo = RREG32(qman_base + QM_ARC_CQ_PTR_LO_STS_OFFSET);
 		hi = RREG32(qman_base + QM_ARC_CQ_PTR_HI_STS_OFFSET);
 		cq_ptr = ((u64) hi) << 32 | lo;
-		cq_ptr_size = RREG32(qman_base + QM_ARC_CQ_TSIZE_STS_OFFSET);
+		cq_size = RREG32(qman_base + QM_ARC_CQ_TSIZE_STS_OFFSET);
 	} else {
 		lo = RREG32(qman_base + QM_CQ_PTR_LO_STS_4_OFFSET);
 		hi = RREG32(qman_base + QM_CQ_PTR_HI_STS_4_OFFSET);
 		cq_ptr = ((u64) hi) << 32 | lo;
-		cq_ptr_size = RREG32(qman_base + QM_CQ_TSIZE_STS_4_OFFSET);
+		cq_size = RREG32(qman_base + QM_CQ_TSIZE_STS_4_OFFSET);
 	}
 
 	lo = RREG32(qman_base + QM_CP_CURRENT_INST_LO_4_OFFSET);
@@ -7885,12 +7886,16 @@ static void handle_lower_qman_data_on_err(struct hl_device *hdev, u64 qman_base,
 
 	dev_info(hdev->dev,
 		"LowerQM. %sCQ: {ptr %#llx, size %u}, CP: {instruction %#018llx}\n",
-		is_arc_cq ? "ARC_" : "", cq_ptr, cq_ptr_size, cp_current_inst);
+		is_arc_cq ? "ARC_" : "", cq_ptr, cq_size, cp_current_inst);
 
-	if (event_mask & HL_NOTIFIER_EVENT_UNDEFINED_OPCODE) {
-		hdev->captured_err_info.undef_opcode.cq_addr = cq_ptr;
-		hdev->captured_err_info.undef_opcode.cq_size = cq_ptr_size;
-		hdev->captured_err_info.undef_opcode.stream_id = QMAN_STREAMS;
+	if (undef_opcode->write_enable) {
+		memset(undef_opcode, 0, sizeof(*undef_opcode));
+		undef_opcode->timestamp = ktime_get();
+		undef_opcode->cq_addr = cq_ptr;
+		undef_opcode->cq_size = cq_size;
+		undef_opcode->engine_id = engine_id;
+		undef_opcode->stream_id = QMAN_STREAMS;
+		undef_opcode->write_enable = 0;
 	}
 }
 
@@ -7929,19 +7934,12 @@ static int gaudi2_handle_qman_err_generic(struct hl_device *hdev, u16 event_type
 				error_count++;
 			}
 
-		/* check for undefined opcode */
-		if (glbl_sts_val & PDMA0_QM_GLBL_ERR_STS_CP_UNDEF_CMD_ERR_MASK) {
+		/* Check for undefined opcode error in lower QM */
+		if ((i == QMAN_STREAMS) &&
+				(glbl_sts_val & PDMA0_QM_GLBL_ERR_STS_CP_UNDEF_CMD_ERR_MASK)) {
+			handle_lower_qman_data_on_err(hdev, qman_base,
+							gaudi2_queue_id_to_engine_id[qid_base]);
 			*event_mask |= HL_NOTIFIER_EVENT_UNDEFINED_OPCODE;
-			if (hdev->captured_err_info.undef_opcode.write_enable) {
-				memset(&hdev->captured_err_info.undef_opcode, 0,
-						sizeof(hdev->captured_err_info.undef_opcode));
-				hdev->captured_err_info.undef_opcode.timestamp = ktime_get();
-				hdev->captured_err_info.undef_opcode.engine_id =
-							gaudi2_queue_id_to_engine_id[qid_base];
-			}
-
-			if (i == QMAN_STREAMS)
-				handle_lower_qman_data_on_err(hdev, qman_base, *event_mask);
 		}
 	}
 
-- 
2.34.1


      parent reply	other threads:[~2023-12-07 12:25 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-12-07 12:24 [PATCH 1/5] accel/habanalabs: report 3 instances of Infineon second stage Oded Gabbay
2023-12-07 12:24 ` [PATCH 2/5] accel/habanalabs/gaudi2: add zero padding when printing QM CP instruction Oded Gabbay
2023-12-07 12:24 ` [PATCH 3/5] accel/habanalabs: update debugfs-driver-habanalabs with the device-name directory Oded Gabbay
2023-12-07 12:24 ` [PATCH 4/5] accel/habanalabs: add parent_device sysfs attribute Oded Gabbay
2023-12-07 12:24 ` Oded Gabbay [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231207122444.50512-5-ogabbay@kernel.org \
    --to=ogabbay@kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ttayar@habana.ai \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.