From: Stephen Hemminger <stephen@networkplumber.org>
To: dev@dpdk.org
Cc: Stephen Hemminger <stephen@networkplumber.org>,
Martin Spinler <spinler@cesnet.cz>,
Rastislav Cernay <cernay@netcope.com>
Subject: [PATCH 3/3] net/nfb: use dynamic logtype
Date: Thu, 7 Dec 2023 10:56:31 -0800 [thread overview]
Message-ID: <20231207185720.19913-4-stephen@networkplumber.org> (raw)
In-Reply-To: <20231207185720.19913-1-stephen@networkplumber.org>
All drivers should be using dynamic logtype.
Fixes: 6435f9a0ac22 ("net/nfb: add new netcope driver")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
drivers/net/nfb/nfb.h | 6 +++++-
drivers/net/nfb/nfb_ethdev.c | 22 +++++++++-------------
drivers/net/nfb/nfb_rx.c | 9 ++++-----
drivers/net/nfb/nfb_rx.h | 2 +-
drivers/net/nfb/nfb_tx.c | 9 ++++-----
drivers/net/nfb/nfb_tx.h | 2 +-
6 files changed, 24 insertions(+), 26 deletions(-)
diff --git a/drivers/net/nfb/nfb.h b/drivers/net/nfb/nfb.h
index 2707f3db6240..3a27457d6e33 100644
--- a/drivers/net/nfb/nfb.h
+++ b/drivers/net/nfb/nfb.h
@@ -12,6 +12,11 @@
#include <netcope/rxmac.h>
#include <netcope/txmac.h>
+extern int nfb_logtype;
+#define NFB_LOG(level, fmt, args...) \
+ rte_log(RTE_LOG_ ## level, nfb_logtype, "%s(): " fmt "\n", \
+ __func__, ## args)
+
#include "nfb_rx.h"
#include "nfb_tx.h"
@@ -36,7 +41,6 @@
#define RTE_NFB_DRIVER_NAME net_nfb
-
struct pmd_internals {
uint16_t max_rxmac;
uint16_t max_txmac;
diff --git a/drivers/net/nfb/nfb_ethdev.c b/drivers/net/nfb/nfb_ethdev.c
index 892abe81f3d6..fc510db7390c 100644
--- a/drivers/net/nfb/nfb_ethdev.c
+++ b/drivers/net/nfb/nfb_ethdev.c
@@ -12,11 +12,9 @@
#include <ethdev_pci.h>
#include <rte_kvargs.h>
+#include "nfb.h"
#include "nfb_stats.h"
-#include "nfb_rx.h"
-#include "nfb_tx.h"
#include "nfb_rxmode.h"
-#include "nfb.h"
/**
* Default MAC addr
@@ -192,8 +190,7 @@ nfb_eth_dev_configure(struct rte_eth_dev *dev __rte_unused)
(&nfb_timestamp_dynfield_offset,
&nfb_timestamp_rx_dynflag);
if (ret != 0) {
- RTE_LOG(ERR, PMD, "Cannot register Rx timestamp"
- " field/flag %d\n", ret);
+ NFB_LOG(ERR, "Cannot register Rx timestamp field/flag %d", ret);
nfb_close(internals->nfb);
return -rte_errno;
}
@@ -520,7 +517,7 @@ nfb_eth_dev_init(struct rte_eth_dev *dev)
struct rte_ether_addr eth_addr_init;
char nfb_dev[PATH_MAX];
- RTE_LOG(INFO, PMD, "Initializing NFB device (" PCI_PRI_FMT ")\n",
+ NFB_LOG(INFO, "Initializing NFB device (" PCI_PRI_FMT ")",
pci_addr->domain, pci_addr->bus, pci_addr->devid,
pci_addr->function);
@@ -536,13 +533,13 @@ nfb_eth_dev_init(struct rte_eth_dev *dev)
*/
internals->nfb = nfb_open(nfb_dev);
if (internals->nfb == NULL) {
- RTE_LOG(ERR, PMD, "nfb_open(): failed to open %s", nfb_dev);
+ NFB_LOG(ERR, "nfb_open(): failed to open %s", nfb_dev);
return -EINVAL;
}
data->nb_rx_queues = ndp_get_rx_queue_available_count(internals->nfb);
data->nb_tx_queues = ndp_get_tx_queue_available_count(internals->nfb);
- RTE_LOG(INFO, PMD, "Available NDP queues RX: %u TX: %u\n",
+ NFB_LOG(INFO, "Available NDP queues RX: %u TX: %u\n",
data->nb_rx_queues, data->nb_tx_queues);
nfb_nc_rxmac_init(internals->nfb,
@@ -567,7 +564,7 @@ nfb_eth_dev_init(struct rte_eth_dev *dev)
data->mac_addrs = rte_zmalloc(data->name,
sizeof(struct rte_ether_addr) * mac_count, RTE_CACHE_LINE_SIZE);
if (data->mac_addrs == NULL) {
- RTE_LOG(ERR, PMD, "Could not alloc space for MAC address!\n");
+ NFB_LOG(ERR, "Could not alloc space for MAC address");
nfb_close(internals->nfb);
return -EINVAL;
}
@@ -585,8 +582,7 @@ nfb_eth_dev_init(struct rte_eth_dev *dev)
dev->data->dev_flags |= RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS;
- RTE_LOG(INFO, PMD, "NFB device ("
- PCI_PRI_FMT ") successfully initialized\n",
+ NFB_LOG(INFO, "NFB device (" PCI_PRI_FMT ") successfully initialized",
pci_addr->domain, pci_addr->bus, pci_addr->devid,
pci_addr->function);
@@ -610,8 +606,7 @@ nfb_eth_dev_uninit(struct rte_eth_dev *dev)
nfb_eth_dev_close(dev);
- RTE_LOG(INFO, PMD, "NFB device ("
- PCI_PRI_FMT ") successfully uninitialized\n",
+ NFB_LOG(INFO, "NFB device (" PCI_PRI_FMT ") successfully uninitialized",
pci_addr->domain, pci_addr->bus, pci_addr->devid,
pci_addr->function);
@@ -674,3 +669,4 @@ static struct rte_pci_driver nfb_eth_driver = {
RTE_PMD_REGISTER_PCI(RTE_NFB_DRIVER_NAME, nfb_eth_driver);
RTE_PMD_REGISTER_PCI_TABLE(RTE_NFB_DRIVER_NAME, nfb_pci_id_table);
RTE_PMD_REGISTER_KMOD_DEP(RTE_NFB_DRIVER_NAME, "* nfb");
+RTE_LOG_REGISTER_DEFAULT(nfb_logtype, NOTICE);
diff --git a/drivers/net/nfb/nfb_rx.c b/drivers/net/nfb/nfb_rx.c
index 8a9b232305f2..a20f7b9b4b41 100644
--- a/drivers/net/nfb/nfb_rx.c
+++ b/drivers/net/nfb/nfb_rx.c
@@ -6,7 +6,6 @@
#include <rte_kvargs.h>
-#include "nfb_rx.h"
#include "nfb.h"
uint64_t nfb_timestamp_rx_dynflag;
@@ -19,7 +18,7 @@ nfb_eth_rx_queue_start(struct rte_eth_dev *dev, uint16_t rxq_id)
int ret;
if (rxq->queue == NULL) {
- RTE_LOG(ERR, PMD, "RX NDP queue is NULL!\n");
+ NFB_LOG(ERR, "RX NDP queue is NULL");
return -EINVAL;
}
@@ -40,7 +39,7 @@ nfb_eth_rx_queue_stop(struct rte_eth_dev *dev, uint16_t rxq_id)
int ret;
if (rxq->queue == NULL) {
- RTE_LOG(ERR, PMD, "RX NDP queue is NULL!\n");
+ NFB_LOG(ERR, "RX NDP queue is NULL");
return -EINVAL;
}
@@ -70,8 +69,8 @@ nfb_eth_rx_queue_setup(struct rte_eth_dev *dev,
RTE_CACHE_LINE_SIZE, socket_id);
if (rxq == NULL) {
- RTE_LOG(ERR, PMD, "rte_zmalloc_socket() failed for rx queue id "
- "%" PRIu16 "!\n", rx_queue_id);
+ NFB_LOG(ERR, "rte_zmalloc_socket() failed for rx queue id %" PRIu16,
+ rx_queue_id);
return -ENOMEM;
}
diff --git a/drivers/net/nfb/nfb_rx.h b/drivers/net/nfb/nfb_rx.h
index b618682e1393..2802f17091a0 100644
--- a/drivers/net/nfb/nfb_rx.h
+++ b/drivers/net/nfb/nfb_rx.h
@@ -156,7 +156,7 @@ nfb_eth_ndp_rx(void *queue,
struct rte_mbuf *mbufs[nb_pkts];
if (unlikely(ndp->queue == NULL || nb_pkts == 0)) {
- RTE_LOG(ERR, PMD, "RX invalid arguments!\n");
+ NFB_LOG(ERR, "RX invalid arguments");
return 0;
}
diff --git a/drivers/net/nfb/nfb_tx.c b/drivers/net/nfb/nfb_tx.c
index d49fc324e76b..0cc2f596301a 100644
--- a/drivers/net/nfb/nfb_tx.c
+++ b/drivers/net/nfb/nfb_tx.c
@@ -4,7 +4,6 @@
* All rights reserved.
*/
-#include "nfb_tx.h"
#include "nfb.h"
int
@@ -14,7 +13,7 @@ nfb_eth_tx_queue_start(struct rte_eth_dev *dev, uint16_t txq_id)
int ret;
if (txq->queue == NULL) {
- RTE_LOG(ERR, PMD, "RX NDP queue is NULL!\n");
+ NFB_LOG(ERR, "RX NDP queue is NULL");
return -EINVAL;
}
@@ -35,7 +34,7 @@ nfb_eth_tx_queue_stop(struct rte_eth_dev *dev, uint16_t txq_id)
int ret;
if (txq->queue == NULL) {
- RTE_LOG(ERR, PMD, "TX NDP queue is NULL!\n");
+ NFB_LOG(ERR, "TX NDP queue is NULL");
return -EINVAL;
}
@@ -62,8 +61,8 @@ nfb_eth_tx_queue_setup(struct rte_eth_dev *dev,
RTE_CACHE_LINE_SIZE, socket_id);
if (txq == NULL) {
- RTE_LOG(ERR, PMD, "rte_zmalloc_socket() failed for tx queue id "
- "%" PRIu16 "!\n", tx_queue_id);
+ NFB_LOG(ERR, "rte_zmalloc_socket() failed for tx queue id %" PRIu16,
+ tx_queue_id);
return -ENOMEM;
}
diff --git a/drivers/net/nfb/nfb_tx.h b/drivers/net/nfb/nfb_tx.h
index 910020e9e96f..f107cf914bbd 100644
--- a/drivers/net/nfb/nfb_tx.h
+++ b/drivers/net/nfb/nfb_tx.h
@@ -140,7 +140,7 @@ nfb_eth_ndp_tx(void *queue,
return 0;
if (unlikely(ndp->queue == NULL)) {
- RTE_LOG(ERR, PMD, "TX invalid arguments!\n");
+ NFB_LOG(ERR, "TX invalid arguments");
return 0;
}
--
2.42.0
next prev parent reply other threads:[~2023-12-07 18:57 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-06 17:51 [RFT] net/nfb: use dynamic logtype Stephen Hemminger
2023-12-07 10:37 ` Martin Spinler
2023-12-07 17:32 ` Stephen Hemminger
2023-12-07 18:56 ` [PATCH 0/3] net/nfb: driver cleanups Stephen Hemminger
2023-12-07 18:56 ` [PATCH 1/3] net/nfb: remove unused device args Stephen Hemminger
2023-12-07 18:56 ` [PATCH 2/3] net/nfb: make device path local to init function Stephen Hemminger
2023-12-07 18:56 ` Stephen Hemminger [this message]
2023-12-12 8:49 ` [PATCH 3/3] net/nfb: use dynamic logtype Martin Spinler
2024-01-12 12:16 ` [PATCH 0/3] net/nfb: driver cleanups Ferruh Yigit
2024-01-12 13:50 ` Martin Spinler
2024-02-08 1:02 ` Ferruh Yigit
2024-02-08 12:01 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231207185720.19913-4-stephen@networkplumber.org \
--to=stephen@networkplumber.org \
--cc=cernay@netcope.com \
--cc=dev@dpdk.org \
--cc=spinler@cesnet.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.