From: <gregkh@linuxfoundation.org>
To: mazziesaccount@gmail.com,Jonathan.Cameron@huawei.com,Stable@vger.kernel.org,jagathjog1996@gmail.com
Subject: patch "iio: kx022a: Fix acceleration value scaling" added to char-misc-linus
Date: Tue, 12 Dec 2023 09:43:39 +0100 [thread overview]
Message-ID: <2023121238-helpful-overpass-213a@gregkh> (raw)
This is a note to let you know that I've just added the patch titled
iio: kx022a: Fix acceleration value scaling
to my char-misc git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
in the char-misc-linus branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.
If you have any questions about this process, please let me know.
From 92bfa4ab1b79be95c4f52d13f5386390f0a513c2 Mon Sep 17 00:00:00 2001
From: Matti Vaittinen <mazziesaccount@gmail.com>
Date: Thu, 19 Oct 2023 16:23:56 +0300
Subject: iio: kx022a: Fix acceleration value scaling
The IIO ABI mandates acceleration values from accelerometer to be
emitted in m/s^2. The KX022A was emitting values in micro m/s^2.
Fix driver to report the correct scale values.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reported-by: Jagath Jog J <jagathjog1996@gmail.com>
Fixes: 7c1d1677b322 ("iio: accel: Support Kionix/ROHM KX022A accelerometer")
Tested-by: Jagath Jog J <jagathjog1996@gmail.com>
Link: https://lore.kernel.org/r/ZTEt7NqfDHPOkm8j@dc78bmyyyyyyyyyyyyydt-3.rev.dnainternet.fi
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
drivers/iio/accel/kionix-kx022a.c | 37 ++++++++++++++++++++++---------
1 file changed, 26 insertions(+), 11 deletions(-)
diff --git a/drivers/iio/accel/kionix-kx022a.c b/drivers/iio/accel/kionix-kx022a.c
index 60864be3a667..53d59a04ae15 100644
--- a/drivers/iio/accel/kionix-kx022a.c
+++ b/drivers/iio/accel/kionix-kx022a.c
@@ -393,17 +393,17 @@ static const unsigned int kx022a_odrs[] = {
* (range / 2^bits) * g = (range / 2^bits) * 9.80665 m/s^2
* => KX022A uses 16 bit (HiRes mode - assume the low 8 bits are zeroed
* in low-power mode(?) )
- * => +/-2G => 4 / 2^16 * 9,80665 * 10^6 (to scale to micro)
- * => +/-2G - 598.550415
- * +/-4G - 1197.10083
- * +/-8G - 2394.20166
- * +/-16G - 4788.40332
+ * => +/-2G => 4 / 2^16 * 9,80665
+ * => +/-2G - 0.000598550415
+ * +/-4G - 0.00119710083
+ * +/-8G - 0.00239420166
+ * +/-16G - 0.00478840332
*/
static const int kx022a_scale_table[][2] = {
- { 598, 550415 },
- { 1197, 100830 },
- { 2394, 201660 },
- { 4788, 403320 },
+ { 0, 598550 },
+ { 0, 1197101 },
+ { 0, 2394202 },
+ { 0, 4788403 },
};
static int kx022a_read_avail(struct iio_dev *indio_dev,
@@ -422,7 +422,7 @@ static int kx022a_read_avail(struct iio_dev *indio_dev,
*vals = (const int *)kx022a_scale_table;
*length = ARRAY_SIZE(kx022a_scale_table) *
ARRAY_SIZE(kx022a_scale_table[0]);
- *type = IIO_VAL_INT_PLUS_MICRO;
+ *type = IIO_VAL_INT_PLUS_NANO;
return IIO_AVAIL_LIST;
default:
return -EINVAL;
@@ -485,6 +485,20 @@ static int kx022a_turn_on_unlock(struct kx022a_data *data)
return ret;
}
+static int kx022a_write_raw_get_fmt(struct iio_dev *idev,
+ struct iio_chan_spec const *chan,
+ long mask)
+{
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ return IIO_VAL_INT_PLUS_NANO;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+}
+
static int kx022a_write_raw(struct iio_dev *idev,
struct iio_chan_spec const *chan,
int val, int val2, long mask)
@@ -629,7 +643,7 @@ static int kx022a_read_raw(struct iio_dev *idev,
kx022a_reg2scale(regval, val, val2);
- return IIO_VAL_INT_PLUS_MICRO;
+ return IIO_VAL_INT_PLUS_NANO;
}
return -EINVAL;
@@ -856,6 +870,7 @@ static int kx022a_fifo_flush(struct iio_dev *idev, unsigned int samples)
static const struct iio_info kx022a_info = {
.read_raw = &kx022a_read_raw,
.write_raw = &kx022a_write_raw,
+ .write_raw_get_fmt = &kx022a_write_raw_get_fmt,
.read_avail = &kx022a_read_avail,
.validate_trigger = iio_validate_own_trigger,
--
2.43.0
reply other threads:[~2023-12-12 8:43 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2023121238-helpful-overpass-213a@gregkh \
--to=gregkh@linuxfoundation.org \
--cc=Jonathan.Cameron@huawei.com \
--cc=Stable@vger.kernel.org \
--cc=jagathjog1996@gmail.com \
--cc=mazziesaccount@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.