From: David Howells <dhowells@redhat.com>
To: Marc Dionne <marc.dionne@auristor.com>
Cc: David Howells <dhowells@redhat.com>,
linux-afs@lists.infradead.org, linux-fsdevel@vger.kernel.org,
linux-kernel@vger.kernel.org, Oleg Nesterov <oleg@redhat.com>
Subject: [PATCH v2 03/40] afs: use read_seqbegin() in afs_check_validity() and afs_getattr()
Date: Wed, 13 Dec 2023 13:49:25 +0000 [thread overview]
Message-ID: <20231213135003.367397-4-dhowells@redhat.com> (raw)
In-Reply-To: <20231213135003.367397-1-dhowells@redhat.com>
From: Oleg Nesterov <oleg@redhat.com>
David Howells says:
(3) afs_check_validity().
(4) afs_getattr().
These are both pretty short, so your solution is probably good for them.
That said, afs_vnode_commit_status() can spend a long time under the
write lock - and pretty much every file RPC op returns a status update.
Change these functions to use read_seqbegin(). This simplifies the code
and doesn't change the current behaviour, the "seq" counter is always even
so read_seqbegin_or_lock() can never take the lock.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20231130115617.GA21584@redhat.com/
---
fs/afs/inode.c | 15 ++++++---------
1 file changed, 6 insertions(+), 9 deletions(-)
diff --git a/fs/afs/inode.c b/fs/afs/inode.c
index 78efc9719349..a6ae74d5b698 100644
--- a/fs/afs/inode.c
+++ b/fs/afs/inode.c
@@ -629,10 +629,10 @@ bool afs_check_validity(struct afs_vnode *vnode)
enum afs_cb_break_reason need_clear = afs_cb_break_no_break;
time64_t now = ktime_get_real_seconds();
unsigned int cb_break;
- int seq = 0;
+ int seq;
do {
- read_seqbegin_or_lock(&vnode->cb_lock, &seq);
+ seq = read_seqbegin(&vnode->cb_lock);
cb_break = vnode->cb_break;
if (test_bit(AFS_VNODE_CB_PROMISED, &vnode->flags)) {
@@ -650,9 +650,7 @@ bool afs_check_validity(struct afs_vnode *vnode)
need_clear = afs_cb_break_no_promise;
}
- } while (need_seqretry(&vnode->cb_lock, seq));
-
- done_seqretry(&vnode->cb_lock, seq);
+ } while (read_seqretry(&vnode->cb_lock, seq));
if (need_clear == afs_cb_break_no_break)
return true;
@@ -755,7 +753,7 @@ int afs_getattr(struct mnt_idmap *idmap, const struct path *path,
struct inode *inode = d_inode(path->dentry);
struct afs_vnode *vnode = AFS_FS_I(inode);
struct key *key;
- int ret, seq = 0;
+ int ret, seq;
_enter("{ ino=%lu v=%u }", inode->i_ino, inode->i_generation);
@@ -772,7 +770,7 @@ int afs_getattr(struct mnt_idmap *idmap, const struct path *path,
}
do {
- read_seqbegin_or_lock(&vnode->cb_lock, &seq);
+ seq = read_seqbegin(&vnode->cb_lock);
generic_fillattr(&nop_mnt_idmap, request_mask, inode, stat);
if (test_bit(AFS_VNODE_SILLY_DELETED, &vnode->flags) &&
stat->nlink > 0)
@@ -784,9 +782,8 @@ int afs_getattr(struct mnt_idmap *idmap, const struct path *path,
*/
if (S_ISDIR(inode->i_mode))
stat->size = vnode->netfs.remote_i_size;
- } while (need_seqretry(&vnode->cb_lock, seq));
+ } while (read_seqretry(&vnode->cb_lock, seq));
- done_seqretry(&vnode->cb_lock, seq);
return 0;
}
next prev parent reply other threads:[~2023-12-13 13:50 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-13 13:49 [PATCH v2 00/40] afs: Fix probe handling, server rotation and RO volume callback handling David Howells
2023-12-13 13:49 ` [PATCH v2 01/40] afs: fix the usage of read_seqbegin_or_lock() in afs_lookup_volume_rcu() David Howells
2023-12-13 13:49 ` [PATCH v2 02/40] afs: fix the usage of read_seqbegin_or_lock() in afs_find_server*() David Howells
2023-12-13 13:49 ` David Howells [this message]
2023-12-13 13:49 ` [PATCH v2 04/40] rxrpc_find_service_conn_rcu: fix the usage of read_seqbegin_or_lock() David Howells
2023-12-13 13:49 ` [PATCH v2 05/40] afs: Remove whitespace before most ')' from the trace header David Howells
2023-12-13 13:49 ` [PATCH v2 06/40] afs: Automatically generate trace tag enums David Howells
2023-12-13 13:49 ` [PATCH v2 07/40] afs: Add comments on abort handling David Howells
2023-12-13 13:49 ` [PATCH v2 08/40] afs: Turn the afs_addr_list address array into an array of structs David Howells
2023-12-13 13:49 ` [PATCH v2 09/40] rxrpc, afs: Allow afs to pin rxrpc_peer objects David Howells
2023-12-13 13:49 ` [PATCH v2 10/40] afs: Don't skip server addresses for which we didn't get an RTT reading David Howells
2023-12-13 13:49 ` [PATCH v2 11/40] afs: Rename addr_list::failed to probe_failed David Howells
2023-12-13 13:49 ` [PATCH v2 12/40] afs: Handle the VIO and UAEIO aborts explicitly David Howells
2023-12-13 13:49 ` [PATCH v2 13/40] afs: Use op->nr_iterations=-1 to indicate to begin fileserver iteration David Howells
2023-12-13 13:49 ` [PATCH v2 14/40] afs: Wrap most op->error accesses with inline funcs David Howells
2023-12-13 13:49 ` [PATCH v2 15/40] afs: Don't put afs_call in afs_wait_for_call_to_complete() David Howells
2023-12-13 13:49 ` [PATCH v2 16/40] afs: Simplify error handling David Howells
2023-12-13 13:49 ` [PATCH v2 17/40] afs: Add a tracepoint for struct afs_addr_list David Howells
2023-12-13 13:49 ` [PATCH v2 18/40] afs: Rename some fields David Howells
2023-12-13 13:49 ` [PATCH v2 19/40] afs: Use peer + service_id as call address David Howells
2023-12-13 13:49 ` [PATCH v2 20/40] afs: Fold the afs_addr_cursor struct in David Howells
2023-12-13 13:49 ` [PATCH v2 21/40] rxrpc: Create a procfile to display outstanding client conn bundles David Howells
2023-12-13 13:49 ` [PATCH v2 22/40] afs: Add some more info to /proc/net/afs/servers David Howells
2023-12-13 13:49 ` [PATCH v2 23/40] afs: Remove the unimplemented afs_cmp_addr_list() David Howells
2023-12-13 13:49 ` [PATCH v2 24/40] afs: Provide a way to configure address priorities David Howells
2023-12-13 13:49 ` [PATCH v2 25/40] afs: Mark address lists with configured priorities David Howells
2023-12-13 13:49 ` [PATCH v2 26/40] afs: Dispatch fileserver probes in priority order David Howells
2023-12-13 13:49 ` [PATCH v2 27/40] afs: Dispatch vlserver " David Howells
2023-12-13 13:49 ` [PATCH v2 28/40] afs: Keep a record of the current fileserver endpoint state David Howells
2023-12-13 13:49 ` [PATCH v2 29/40] afs: Combine the endpoint state bools into a bitmask David Howells
2023-12-13 13:49 ` [PATCH v2 30/40] afs: Make it possible to find the volumes that are using a server David Howells
2023-12-13 13:49 ` [PATCH v2 31/40] afs: Defer volume record destruction to a workqueue David Howells
2023-12-13 13:49 ` [PATCH v2 32/40] afs: Move the vnode/volume validity checking code into its own file David Howells
2023-12-13 13:49 ` [PATCH v2 33/40] afs: Apply server breaks to mmap'd files in the call processor David Howells
2023-12-13 13:49 ` [PATCH v2 34/40] afs: Fix comment in afs_do_lookup() David Howells
2023-12-13 13:49 ` [PATCH v2 35/40] afs: Don't leave DONTUSE/NEWREPSITE servers out of server list David Howells
2023-12-13 13:49 ` [PATCH v2 36/40] afs: Parse the VolSync record in the reply of a number of RPC ops David Howells
2023-12-13 13:49 ` [PATCH v2 37/40] afs: Overhaul invalidation handling to better support RO volumes David Howells
2023-12-13 13:50 ` [PATCH v2 38/40] afs: Fix fileserver rotation David Howells
2023-12-13 13:50 ` [PATCH v2 39/40] afs: Fix offline and busy message emission David Howells
2023-12-13 13:50 ` [PATCH v2 40/40] afs: trace: Log afs_make_call(), including server address David Howells
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231213135003.367397-4-dhowells@redhat.com \
--to=dhowells@redhat.com \
--cc=linux-afs@lists.infradead.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.dionne@auristor.com \
--cc=oleg@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.