[PATCH 21/26] arm: dts: k3-am654: remove duplicate vtt pinmux

[Bryan Brattlof <bb@ti.com>]

With the Linux and U-Boot board dtb files unified, we now have a
duplicate vtt_pinmux node. Remove it

Signed-off-by: Bryan Brattlof <bb@ti.com>
---
 arch/arm/dts/k3-am654-base-board-u-boot.dtsi |  2 +-
 arch/arm/dts/k3-am654-r5-base-board.dts      | 10 ----------
 2 files changed, 1 insertion(+), 11 deletions(-)

diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
index 104cb2e559f2f..a9b2d0d2a3036 100644
--- a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
@@ -101,7 +101,7 @@
 	bootph-pre-ram;
 };
 
-&wkup_vtt_pins_default {
+&ddr_vtt_pins_default {
 	bootph-pre-ram;
 };
 
diff --git a/arch/arm/dts/k3-am654-r5-base-board.dts b/arch/arm/dts/k3-am654-r5-base-board.dts
index 1b99517e51678..b4aa904e9bb4d 100644
--- a/arch/arm/dts/k3-am654-r5-base-board.dts
+++ b/arch/arm/dts/k3-am654-r5-base-board.dts
@@ -101,18 +101,8 @@
 	vdd-supply-4 = <&vdd_mpu>;
 };
 
-&wkup_pmx0 {
-	wkup_vtt_pins_default: wkup_vtt_pins_default {
-		pinctrl-single,pins = <
-			AM65X_WKUP_IOPAD(0x0040, PIN_OUTPUT_PULLUP, 7)	/* WKUP_GPIO0_28 */
-		>;
-	};
-};
-
 &memorycontroller {
 	vtt-supply = <&vtt_supply>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&wkup_vtt_pins_default>;
 };
 
 /* MMC is probed to pull in firmware, so any clock
-- 
2.43.0