[PATCH 5/5] arm: dts: marvell: clearfog-gtr-l8: align port numbers with enclosure

[Josua Mayer <josua@solid-run.com>]

Clearfog GTR has an official enclosure with labels for all interfaces.
The "lan" ports on the 8-port switch in device-tree were numbered  in
reverse wrt. enclosure.

Update all device-tree labels to match.

Signed-off-by: Josua Mayer <josua@solid-run.com>
---
 .../dts/marvell/armada-385-clearfog-gtr-l8.dts   | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
index bb2142907023..44303e79c489 100644
--- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
@@ -31,49 +31,49 @@ ports {
 
 			port@1 {
 				reg = <1>;
-				label = "lan8";
+				label = "lan1";
 				phy-handle = <&switch0phy0>;
 			};
 
 			port@2 {
 				reg = <2>;
-				label = "lan7";
+				label = "lan2";
 				phy-handle = <&switch0phy1>;
 			};
 
 			port@3 {
 				reg = <3>;
-				label = "lan6";
+				label = "lan3";
 				phy-handle = <&switch0phy2>;
 			};
 
 			port@4 {
 				reg = <4>;
-				label = "lan5";
+				label = "lan4";
 				phy-handle = <&switch0phy3>;
 			};
 
 			port@5 {
 				reg = <5>;
-				label = "lan4";
+				label = "lan5";
 				phy-handle = <&switch0phy4>;
 			};
 
 			port@6 {
 				reg = <6>;
-				label = "lan3";
+				label = "lan6";
 				phy-handle = <&switch0phy5>;
 			};
 
 			port@7 {
 				reg = <7>;
-				label = "lan2";
+				label = "lan7";
 				phy-handle = <&switch0phy6>;
 			};
 
 			port@8 {
 				reg = <8>;
-				label = "lan1";
+				label = "lan8";
 				phy-handle = <&switch0phy7>;
 			};
 
-- 
2.35.3


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel