Re: [PATCH 2/3] arm64: dts: qcom: sc8280xp: Correct USB PHY power domains

[Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>]

On Fri, Dec 29, 2023 at 02:01:06PM +0100, Johan Hovold wrote:
> On Wed, Dec 27, 2023 at 11:28:27PM +0100, Konrad Dybcio wrote:
> > The USB GDSCs are only related to the controllers.
> 
> Are you sure?
> 

Yes, that's what I was told by UFS and PCIe teams and some of the internal
documentation also confirms the same.

> > The PHYs on the other
> > hand, are powered by VDD_MX and their specific VDDA_PHY/PLL regulators.
> > 
> > Fix the power-domains assignment to stop potentially toggling the GDSC
> > unnecessarily.
> 
> Again, there's no additional toggling being done here, but yes, this may
> keep the domains enabled during suspend depending on how the driver is
> implemented.
> 
> If that's the concern, then please spell that out too.
> 
> > Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
> 
> May not be needed either.
> 

Fixes tag is indeed needed on this platform and all other platforms too.

- Mani

> > @@ -2597,7 +2597,7 @@ usb_2_qmpphy0: phy@88ef000 {
> >  				 <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>;
> >  			reset-names = "phy", "phy_phy";
> >  
> > -			power-domains = <&gcc USB30_MP_GDSC>;
> > +			power-domains = <&rpmhpd SC8280XP_MX>;
> 
> Johan
> 

-- 
மணிவண்ணன் சதாசிவம்