[PATCH v2 08/26] arm: dts: k3-am654: remove duplicate wkup_uart0

[Bryan Brattlof <bb@ti.com>]

With the Linux and U-Boot board files unified, we now have a duplicate
wkup_uart0 node. Remove it

Tested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
---
 arch/arm/dts/k3-am654-r5-base-board.dts | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/arch/arm/dts/k3-am654-r5-base-board.dts b/arch/arm/dts/k3-am654-r5-base-board.dts
index 50e6be6118294..fb13a17b1dc64 100644
--- a/arch/arm/dts/k3-am654-r5-base-board.dts
+++ b/arch/arm/dts/k3-am654-r5-base-board.dts
@@ -18,7 +18,6 @@
 		ethernet0 = &cpsw_port1;
 		remoteproc0 = &sysctrler;
 		remoteproc1 = &a53_0;
-		serial0 = &wkup_uart0;
 		serial1 = &mcu_uart0;
 		serial2 = &main_uart0;
 		spi0 = &ospi0;
@@ -117,8 +116,6 @@
 };
 
 &wkup_uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&wkup_uart0_pins_default>;
 	status = "okay";
 	bootph-pre-ram;
 };
@@ -146,15 +143,6 @@
 };
 
 &wkup_pmx0 {
-	wkup_uart0_pins_default: wkup_uart0_pins_default {
-		pinctrl-single,pins = <
-			AM65X_WKUP_IOPAD(0x00a0, PIN_INPUT, 0)	/* (AB1) WKUP_UART0_RXD */
-			AM65X_WKUP_IOPAD(0x00a4, PIN_OUTPUT, 0)	/* (AB5) WKUP_UART0_TXD */
-			AM65X_WKUP_IOPAD(0x00c8, PIN_INPUT, 1)	/* (AC2) WKUP_GPIO0_6.WKUP_UART0_CTSn */
-			AM65X_WKUP_IOPAD(0x00cc, PIN_OUTPUT, 1)	/* (AC1) WKUP_GPIO0_7.WKUP_UART0_RTSn */
-		>;
-	};
-
 	wkup_vtt_pins_default: wkup_vtt_pins_default {
 		pinctrl-single,pins = <
 			AM65X_WKUP_IOPAD(0x0040, PIN_OUTPUT_PULLUP, 7)	/* WKUP_GPIO0_28 */
-- 
2.43.0