[PATCH] media: uvcvideo: extend the bandwdith quirk to USB 3.x

[Michal Pecio <michal.pecio@gmail.com>]

The bandwidth fixup quirk which is needed to run certain buggy cameras
doesn't know that SuperSpeed exists and has the same 8 service intervals
per millisecond as High Speed; hence its calculations are badly wrong.

Assume that all speeds from HS up use 8 intervals per millisecond.

No further changes are required. Updated code has been confirmed to work
properly with a SuperSpeed camera, as well as some High Speed ones.

Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
---
 drivers/media/usb/uvc/uvc_video.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
index 28dde08ec6c5..4b86bef06a52 100644
--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -214,13 +214,13 @@ static void uvc_fixup_video_ctrl(struct uvc_streaming *stream,
 		 * Compute a bandwidth estimation by multiplying the frame
 		 * size by the number of video frames per second, divide the
 		 * result by the number of USB frames (or micro-frames for
-		 * high-speed devices) per second and add the UVC header size
-		 * (assumed to be 12 bytes long).
+		 * high- and super-speed devices) per second and add the UVC
+		 * header size (assumed to be 12 bytes long).
 		 */
 		bandwidth = frame->wWidth * frame->wHeight / 8 * format->bpp;
 		bandwidth *= 10000000 / interval + 1;
 		bandwidth /= 1000;
-		if (stream->dev->udev->speed == USB_SPEED_HIGH)
+		if (stream->dev->udev->speed >= USB_SPEED_HIGH)
 			bandwidth /= 8;
 		bandwidth += 12;
 
-- 
2.43.0