[PATCH 1/3] usb: ucsi: Add missing ppm_lock

["Christian A. Ehrhardt" <lk@c--e.de>]

Calling ->sync_write must be done while holding the PPM lock as the
mailbox logic does not support concurrent commands.

Thus protect the only call to ucsi_acknowledge_connector_change
with the PPM lock as it calls ->sync_write. All other calls to
->sync_write already happen under the PPM lock.

Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
---
NOTE: This is not a theoretical issue. I've seen problems resulting
from the missing lock on real hardware.

 drivers/usb/typec/ucsi/ucsi.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index 61b64558f96c..8f9dff993b3d 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -935,7 +935,9 @@ static void ucsi_handle_connector_change(struct work_struct *work)
 
 	clear_bit(EVENT_PENDING, &con->ucsi->flags);
 
+	mutex_lock(&ucsi->ppm_lock);
 	ret = ucsi_acknowledge_connector_change(ucsi);
+	mutex_unlock(&ucsi->ppm_lock);
 	if (ret)
 		dev_err(ucsi->dev, "%s: ACK failed (%d)", __func__, ret);
 
-- 
2.40.1