From: Jagan Teki <jagan@amarulasolutions.com>
To: Anatolij Gustschin <agust@denx.de>,
Neil Armstrong <neil.armstrong@linaro.org>,
Andre Przywara <andre.przywara@arm.com>,
Kever Yang <kever.yang@rock-chips.com>,
Simon Glass <sjg@chromium.org>, Heiko Stuebner <heiko@sntech.de>,
Andy Yan <andyshrk@163.com>, Robin Murphy <robin.murphy@arm.com>
Cc: Da Xue <da.xue@libretech.co>,
u-boot@lists.denx.de, Jagan Teki <jagan@amarulasolutions.com>
Subject: [PATCH v3 17/17] configs: Enable HDMI Out for ROC-RK3328-CC
Date: Wed, 17 Jan 2024 13:21:54 +0530 [thread overview]
Message-ID: <20240117075154.58747-18-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20240117075154.58747-1-jagan@amarulasolutions.com>
U-Boot 2024.01-00901-g75d07e0e6e-dirty (Jan 17 2024 - 12:50:56 +0530)
Model: Firefly roc-rk3328-cc
DRAM: 4 GiB
PMIC: RK8050 (on=0x40, off=0x00)
Core: 236 devices, 26 uclasses, devicetree: separate
MMC: mmc@ff500000: 1, mmc@ff520000: 0
Loading Environment from MMC... *** Warning - bad CRC, using default environment
In: serial,usbkbd
Out: serial,vidconsole
Err: serial,vidconsole
Model: Firefly roc-rk3328-cc
Net: eth0: ethernet@ff540000
Hit any key to stop autoboot: 0
=> dm tree
Class Index Probed Driver Name
-----------------------------------------------------------
root 0 [ + ] root_driver root_driver
firmware 0 [ ] psci |-- psci
clk 0 [ + ] fixed_clock |-- xin24m
syscon 0 [ + ] rockchip_rk3328_grf |-- syscon@ff100000
serial 0 [ + ] ns16550_serial |-- serial@ff130000
i2c 0 [ + ] rockchip_rk3066_i2c |-- i2c@ff160000
pmic 0 [ + ] rockchip_rk805 | `-- pmic@18
sysreset 0 [ ] rk8xx_sysreset | |-- rk8xx_sysreset
regulator 0 [ + ] rk8xx_buck | |-- DCDC_REG1
regulator 1 [ + ] rk8xx_buck | |-- DCDC_REG2
regulator 2 [ + ] rk8xx_buck | |-- DCDC_REG3
regulator 3 [ + ] rk8xx_buck | |-- DCDC_REG4
regulator 4 [ + ] rk8xx_ldo | |-- LDO_REG1
regulator 5 [ + ] rk8xx_ldo | |-- LDO_REG2
regulator 6 [ + ] rk8xx_ldo | `-- LDO_REG3
video 0 [ + ] rk3328_vop |-- vop@ff370000
vidconsole 0 [ + ] vidconsole0 | `-- vop@ff370000.vidconsole0
display 0 [ + ] rk3328_hdmi_rockchip |-- hdmi@ff3c0000
phy 0 [ + ] inno_hdmi_phy |-- phy@ff430000
clk 1 [ + ] rockchip_rk3328_cru |-- clock-controller@ff440000
sysreset 1 [ ] rockchip_sysreset | |-- sysreset
reset 0 [ + ] rockchip_reset | `-- reset
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v3, v2:
- none
configs/roc-cc-rk3328_defconfig | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/configs/roc-cc-rk3328_defconfig b/configs/roc-cc-rk3328_defconfig
index 4ac3c9403b..4eef9016dc 100644
--- a/configs/roc-cc-rk3328_defconfig
+++ b/configs/roc-cc-rk3328_defconfig
@@ -79,6 +79,7 @@ CONFIG_PHY_REALTEK=y
CONFIG_PHY_GIGE=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PHY_ROCKCHIP_INNO_HDMI=y
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
@@ -114,6 +115,10 @@ CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GENERIC=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_VIDEO=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_ROCKCHIP=y
+CONFIG_DISPLAY_ROCKCHIP_HDMI=y
CONFIG_SPL_TINY_MEMSET=y
CONFIG_TPL_TINY_MEMSET=y
CONFIG_ERRNO_STR=y
--
2.25.1
next prev parent reply other threads:[~2024-01-17 7:55 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-17 7:51 [PATCH v3 00/17] video: dw_hdmi: Support Vendor PHY Jagan Teki
2024-01-17 7:51 ` [PATCH v3 01/17] video: rockchip: hdmi: Detect hpd after controller init Jagan Teki
2024-01-17 7:51 ` [PATCH v3 02/17] video: dw_hdmi: Add Vendor PHY handling Jagan Teki
2024-01-17 8:58 ` Neil Armstrong
2024-01-17 7:51 ` [PATCH v3 03/17] video: dw_hdmi: Extend the HPD detection Jagan Teki
2024-01-17 8:59 ` Neil Armstrong
2024-01-17 7:51 ` [PATCH v3 04/17] video: dw_hdmi: Add read_hpd hook Jagan Teki
2024-01-17 8:59 ` Neil Armstrong
2024-01-17 7:51 ` [PATCH v3 05/17] video: dw_hdmi: Add setup_hpd hook Jagan Teki
2024-01-17 8:59 ` Neil Armstrong
2024-01-17 7:51 ` [PATCH v3 06/17] video: rockchip: vop: Simplify rkvop_enable Jagan Teki
2024-01-17 7:51 ` [PATCH v3 07/17] video: rockchip: vop: Add win offset support Jagan Teki
2024-01-17 7:51 ` [PATCH v3 08/17] video: rockchip: vop: Add dsp " Jagan Teki
2024-01-17 7:51 ` [PATCH v3 09/17] clk: rockchip: rk3328: Add VOP clk support Jagan Teki
2024-01-17 7:51 ` [PATCH v3 10/17] clk: rk3328: Add get hdmiphy clock Jagan Teki
2024-01-17 7:51 ` [PATCH v3 11/17] phy: rockchip: Add Rockchip INNO HDMI PHY driver Jagan Teki
2024-01-17 7:51 ` [PATCH v3 12/17] video: rockchip: Add rk3328 hdmi support Jagan Teki
2024-01-17 7:51 ` [PATCH v3 13/17] video: rockchip: Add rk3328 vop support Jagan Teki
2024-01-17 7:51 ` [PATCH v3 14/17] ARM: dts: rk3328: Enable VOP for bootph-all Jagan Teki
2024-02-19 17:21 ` Jonas Karlman
2024-02-19 18:32 ` Jagan Teki
2024-01-17 7:51 ` [PATCH v3 15/17] rockchip: Enable preconsole for rk3328 Jagan Teki
2024-01-17 7:51 ` [PATCH v3 16/17] configs: evb-rk3328: Enable vidconsole " Jagan Teki
2024-01-17 7:51 ` Jagan Teki [this message]
2024-02-19 11:49 ` [PATCH v3 00/17] video: dw_hdmi: Support Vendor PHY Jagan Teki
2024-03-14 9:25 ` Jagan Teki
2024-04-20 23:19 ` Anatolij Gustschin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240117075154.58747-18-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=agust@denx.de \
--cc=andre.przywara@arm.com \
--cc=andyshrk@163.com \
--cc=da.xue@libretech.co \
--cc=heiko@sntech.de \
--cc=kever.yang@rock-chips.com \
--cc=neil.armstrong@linaro.org \
--cc=robin.murphy@arm.com \
--cc=sjg@chromium.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.