From: William Bulley <web@umich.edu>
To: amd-gfx@lists.freedesktop.org
Subject: Have WX 3200 Radeon graphics card -- cannot get X11 session to work
Date: Fri, 26 Jan 2024 13:44:47 -0500 [thread overview]
Message-ID: <20240126184447.GC660@dell4> (raw)
I am running FreeBSD 14.0-STABLE from January 4th. I have read the
handbook and followed the instructions there. I have these drivers:
unix# ls -al /usr/local/lib/xorg/modules/drivers
total 476
drwxr-xr-x 2 root wheel 8 Jan 21 14:18 .
drwxr-xr-x 5 root wheel 13 Jan 21 14:18 ..
-rwxr-xr-x 1 root wheel 146216 Jan 6 11:41 amdgpu_drv.so
-rwxr-xr-x 1 root wheel 7344 Jan 11 13:18 ati_drv.so
-rwxr-xr-x 1 root wheel 112320 Jan 21 14:18 modesetting_drv.so
-rwxr-xr-x 1 root wheel 501696 Jan 11 13:18 radeon_drv.so
-rwxr-xr-x 1 root wheel 19800 Jan 6 11:41 scfb_drv.so
-rwxr-xr-x 1 root wheel 27392 Jan 6 11:41 vesa_drv.so
I have these modules:
unix# cd /boot/modules
unix# ls -al *amdgpu*
-r--r--r-- 1 root wheel 8581752 Jan 22 15:14 amdgpu.ko
<<plus hundreds of other amdgpu*.ko modules>>
unix# ls -al *kms*
-r--r--r-- 1 root wheel 3013512 Jan 22 15:14 i915kms.ko
-r--r--r-- 1 root wheel 2394600 Jan 22 15:14 radeonkms.ko
I have followed the instructions in the handbook Chapter 5.1
but have never gotten an x11 session to appear. Whenever I
run startx as a non-root user, the error message is always
"(EE) no screens found".
The WX 3200 (RS780?) is a newer card, so I put this line in
my /etc/rc,conf file:
kld_list+="amdgpu"
During the booting of the O/S these 90 lines appear in my
/var/log/messages file:
Jan 26 10:35:20 msi1 kernel: [drm] amdgpu kernel modesetting enabled.
Jan 26 10:35:20 msi1 kernel: drmn0: <drmn> on vgapci0
Jan 26 10:35:20 msi1 kernel: vgapci0: child drmn0 requested pci_enable_io
Jan 26 10:35:20 msi1 kernel: vgapci0: child drmn0 requested pci_enable_io
Jan 26 10:35:20 msi1 kernel: [drm] initializing kernel modesetting (POLARIS12 0x1002:0x6981 0x1002:0x0B0D 0x10).
Jan 26 10:35:20 msi1 kernel: drmn0: Trusted Memory Zone (TMZ) feature not supported
Jan 26 10:35:20 msi1 kernel: [drm] register mmio base: 0xFCC00000
Jan 26 10:35:20 msi1 kernel: [drm] register mmio size: 262144
Jan 26 10:35:20 msi1 kernel: [drm] add ip block number 0 <vi_common>
Jan 26 10:35:20 msi1 kernel: [drm] add ip block number 1 <gmc_v8_0>
Jan 26 10:35:20 msi1 kernel: [drm] add ip block number 2 <tonga_ih>
Jan 26 10:35:20 msi1 kernel: [drm] add ip block number 3 <gfx_v8_0>
Jan 26 10:35:20 msi1 kernel: [drm] add ip block number 4 <sdma_v3_0>
Jan 26 10:35:20 msi1 kernel: [drm] add ip block number 5 <powerplay>
Jan 26 10:35:20 msi1 kernel: [drm] add ip block number 6 <dm>
Jan 26 10:35:20 msi1 kernel: [drm] add ip block number 7 <uvd_v6_0>
Jan 26 10:35:20 msi1 kernel: [drm] add ip block number 8 <vce_v3_0>
Jan 26 10:35:20 msi1 kernel: drmn0: Fetched VBIOS from VFCT
Jan 26 10:35:20 msi1 kernel: amdgpu: ATOM BIOS: 113-D0155100-101
Jan 26 10:35:20 msi1 kernel: [drm] UVD is enabled in VM mode
Jan 26 10:35:20 msi1 kernel: [drm] UVD ENC is enabled in VM mode
Jan 26 10:35:20 msi1 kernel: [drm] VCE enabled in VM mode
Jan 26 10:35:20 msi1 kernel: [drm] vm size is 256 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
Jan 26 10:35:20 msi1 kernel: drmn0: successfully loaded firmware image 'amdgpu/polaris12_k_mc.bin'
Jan 26 10:35:20 msi1 kernel: drmn0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
Jan 26 10:35:20 msi1 kernel: drmn0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
Jan 26 10:35:20 msi1 kernel: [drm] Detected VRAM RAM=4096M, BAR=4096M
Jan 26 10:35:20 msi1 kernel: [drm] RAM width 128bits GDDR5
Jan 26 10:35:20 msi1 kernel: [drm] amdgpu: 4096M of VRAM memory ready
Jan 26 10:35:20 msi1 kernel: [drm] amdgpu: 4096M of GTT memory ready.
Jan 26 10:35:20 msi1 kernel: [drm] GART: num cpu pages 65536, num gpu pages 65536
Jan 26 10:35:20 msi1 kernel: [drm] PCIE GART of 256M enabled (table at 0x000000F400300000).
Jan 26 10:35:20 msi1 kernel: drmn0: successfully loaded firmware image 'amdgpu/polaris12_pfp_2.bin'
Jan 26 10:35:20 msi1 kernel: drmn0: successfully loaded firmware image 'amdgpu/polaris12_me_2.bin'
Jan 26 10:35:20 msi1 kernel: drmn0: successfully loaded firmware image 'amdgpu/polaris12_ce_2.bin'
Jan 26 10:35:20 msi1 kernel: [drm] Chained IB support enabled!
Jan 26 10:35:20 msi1 kernel: drmn0: successfully loaded firmware image 'amdgpu/polaris12_rlc.bin'
Jan 26 10:35:20 msi1 kernel: drmn0: successfully loaded firmware image 'amdgpu/polaris12_mec_2.bin'
Jan 26 10:35:20 msi1 kernel: drmn0: successfully loaded firmware image 'amdgpu/polaris12_mec2_2.bin'
Jan 26 10:35:20 msi1 kernel: drmn0: successfully loaded firmware image 'amdgpu/polaris12_sdma.bin'
Jan 26 10:35:20 msi1 kernel: drmn0: successfully loaded firmware image 'amdgpu/polaris12_sdma1.bin'
Jan 26 10:35:20 msi1 kernel: amdgpu: hwmgr_sw_init smu backed is polaris10_smu
Jan 26 10:35:20 msi1 kernel: drmn0: successfully loaded firmware image 'amdgpu/polaris12_uvd.bin'
Jan 26 10:35:20 msi1 kernel: [drm] Found UVD firmware Version: 1.130 Family ID: 16
Jan 26 10:35:20 msi1 kernel: drmn0: successfully loaded firmware image 'amdgpu/polaris12_vce.bin'
Jan 26 10:35:20 msi1 kernel: [drm] Found VCE firmware Version: 53.26 Binary ID: 3
Jan 26 10:35:20 msi1 kernel: drmn0: successfully loaded firmware image 'amdgpu/polaris12_k_smc.bin'
Jan 26 10:35:20 msi1 kernel: [drm] Display Core initialized with v3.2.149!
Jan 26 10:35:20 msi1 kernel: lkpi_iic0: <LinuxKPI I2C> on drmn0
Jan 26 10:35:20 msi1 kernel: iicbus0: <Philips I2C bus> on lkpi_iic0
Jan 26 10:35:20 msi1 kernel: iic0: <I2C generic I/O> on iicbus0
Jan 26 10:35:20 msi1 kernel: lkpi_iic1: <LinuxKPI I2C> on drmn0
Jan 26 10:35:20 msi1 kernel: iicbus1: <Philips I2C bus> on lkpi_iic1
Jan 26 10:35:20 msi1 kernel: iic1: <I2C generic I/O> on iicbus1
Jan 26 10:35:20 msi1 kernel: lkpi_iic2: <LinuxKPI I2C> on drmn0
Jan 26 10:35:20 msi1 kernel: iicbus2: <Philips I2C bus> on lkpi_iic2
Jan 26 10:35:20 msi1 kernel: iic2: <I2C generic I/O> on iicbus2
Jan 26 10:35:20 msi1 kernel: lkpi_iic3: <LinuxKPI I2C> on drmn0
Jan 26 10:35:20 msi1 kernel: iicbus3: <Philips I2C bus> on lkpi_iic3
Jan 26 10:35:20 msi1 kernel: iic3: <I2C generic I/O> on iicbus3
Jan 26 10:35:20 msi1 kernel: [drm] UVD and UVD ENC initialized successfully.
Jan 26 10:35:20 msi1 kernel: [drm] VCE initialized successfully.
Jan 26 10:35:20 msi1 kernel: drmn0: SE 2, SH per SE 1, CU per SH 5, active_cu_number 10
Jan 26 10:35:20 msi1 kernel: [drm] fb mappable at 0x7E00830000
Jan 26 10:35:20 msi1 kernel: [drm] vram apper at 0x7E00000000
Jan 26 10:35:20 msi1 kernel: [drm] size 19906560
Jan 26 10:35:20 msi1 kernel: [drm] fb depth is 24
Jan 26 10:35:20 msi1 kernel: [drm] pitch is 13824
Jan 26 10:35:20 msi1 kernel: VT: Replacing driver "efifb" with new "fb".
Jan 26 10:35:20 msi1 kernel: start FB_INFO:
Jan 26 10:35:20 msi1 kernel: type=11 height=1440 width=3440 depth=32
Jan 26 10:35:20 msi1 kernel: pbase=0x7e00830000 vbase=0xfffffe01ca830000
Jan 26 10:35:20 msi1 kernel: name=drmn0 flags=0x0 stride=13824 bpp=32
Jan 26 10:35:20 msi1 kernel: end FB_INFO
Jan 26 10:35:20 msi1 kernel: vgapci0: child drmn0 requested pci_get_powerstate
Jan 26 10:35:20 msi1 kernel: drmn0: Using BACO for runtime pm
Jan 26 10:35:20 msi1 kernel: sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
Jan 26 10:35:20 msi1 kernel: lkpi_iic4: <LinuxKPI I2C> on drm1
Jan 26 10:35:20 msi1 kernel: iicbus4: <Philips I2C bus> on lkpi_iic4
Jan 26 10:35:20 msi1 kernel: iic4: <I2C generic I/O> on iicbus4
Jan 26 10:35:20 msi1 kernel: lkpi_iic5: <LinuxKPI I2C> on drm2
Jan 26 10:35:20 msi1 kernel: iicbus5: <Philips I2C bus> on lkpi_iic5
Jan 26 10:35:20 msi1 kernel: iic5: <I2C generic I/O> on iicbus5
Jan 26 10:35:20 msi1 kernel: lkpi_iic6: <LinuxKPI I2C> on drm3
Jan 26 10:35:20 msi1 kernel: iicbus6: <Philips I2C bus> on lkpi_iic6
Jan 26 10:35:20 msi1 kernel: iic6: <I2C generic I/O> on iicbus6
Jan 26 10:35:20 msi1 kernel: lkpi_iic7: <LinuxKPI I2C> on drm4
Jan 26 10:35:20 msi1 kernel: iicbus7: <Philips I2C bus> on lkpi_iic7
Jan 26 10:35:20 msi1 kernel: iic7: <I2C generic I/O> on iicbus7
Jan 26 10:35:20 msi1 kernel: [drm] Initialized amdgpu 3.42.0 20150101 for drmn0 on minor 0
And finally the contents of my /var/log/Xorg.0.log file:
[ 37.721]
X.Org X Server 1.21.1.11
X Protocol Version 11, Revision 0
[ 37.721] Current Operating System: FreeBSD unix 14.0-STABLE FreeBSD 14.0-STABLE #0 stable/14-n266191-8247b328ef0e: Thu Jan 4 06:38:16 UTC 2024 root@releng1.nyi.freebsd.org:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
[ 37.721]
[ 37.721] Current version of pixman: 0.42.2
[ 37.722] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 37.722] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 37.722] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 26 12:16:25 2024
[ 37.722] (==) Using config directory: "/usr/local/etc/X11/xorg.conf.d"
[ 37.722] (==) No Layout section. Using the first Screen section.
[ 37.722] (**) |-->Screen "Screen0" (0)
[ 37.722] (**) | |-->Monitor "Monitor0"
[ 37.723] (**) | |-->Device "Device0"
[ 37.723] (==) Automatically adding devices
[ 37.723] (==) Automatically enabling devices
[ 37.723] (==) Automatically adding GPU devices
[ 37.723] (==) Automatically binding GPU devices
[ 37.723] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 37.725] (==) FontPath set to:
/usr/local/share/fonts/misc/,
/usr/local/share/fonts/TTF/,
/usr/local/share/fonts/OTF/,
/usr/local/share/fonts/Type1/,
/usr/local/share/fonts/100dpi/,
/usr/local/share/fonts/75dpi/,
catalogue:/usr/local/etc/X11/fontpath.d
[ 37.725] (==) ModulePath set to "/usr/local/lib/xorg/modules"
[ 37.725] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 37.725] (II) Module ABI versions:
[ 37.725] X.Org ANSI C Emulation: 0.4
[ 37.725] X.Org Video Driver: 25.2
[ 37.725] X.Org XInput driver : 24.4
[ 37.725] X.Org Server Extension : 10.0
[ 37.727] (--) PCI:*(41@0:0:0) 1002:6981:1002:0b0d rev 16, Mem @ 0x7e00000000/4294967296, 0x7f00000000/2097152, 0xfcc00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/65536
[ 37.727] (II) LoadModule: "glx"
[ 37.727] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[ 37.730] (II) Module glx: vendor="X.Org Foundation"
[ 37.730] compiled for 1.21.1.11, module version = 1.0.0
[ 37.730] ABI class: X.Org Server Extension, version 10.0
[ 37.730] (II) LoadModule: "amdgpu"
[ 37.730] (II) Loading /usr/local/lib/xorg/modules/drivers/amdgpu_drv.so
[ 37.732] (II) Module amdgpu: vendor="X.Org Foundation"
[ 37.732] compiled for 1.21.1.10, module version = 22.0.0
[ 37.732] Module class: X.Org Video Driver
[ 37.732] ABI class: X.Org Video Driver, version 25.2
[ 37.732] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 37.732] (--) Using syscons driver with X support (version 2.0)
[ 37.732] (--) using VT number 9
[ 37.732] (II) AMDGPU(0): [KMS] Kernel modesetting enabled.
[ 37.732] (EE) AMDGPU(0): [drm] Failed to open DRM device for pci:0000:29:00.0: No such file or directory
[ 37.732] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 37.732] (EE) Screen 0 deleted because of no matching config section.
[ 37.732] (II) UnloadModule: "amdgpu"
[ 37.732] (EE) Device(s) detected, but none match those in the config file.
[ 37.732] (EE)
Fatal server error:
[ 37.732] (EE) no screens found(EE)
[ 37.732] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 37.732] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 37.732] (EE)
[ 37.732] (EE) Server terminated with error (1). Closing log file.
I have nothing in my /etc/X11 directory, nor anything in my
/usr/local/etc/X11/xorg.conf.d directory. Can anyone help
explain what I am doing wrong, or what I need to do to get
a working x11 session on my 3440 x 1440 resolution monitor?
--
William Bulley
E-MAIL: web@umich.edu
<web@umich.edu>
next reply other threads:[~2024-01-26 18:45 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-26 18:44 William Bulley [this message]
2024-01-26 20:50 ` Have WX 3200 Radeon graphics card -- cannot get X11 session to work Deucher, Alexander
-- strict thread matches above, loose matches on Subject: below --
2024-01-26 21:19 William Bulley
2024-01-26 21:28 ` Deucher, Alexander
2024-01-26 22:18 William Bulley
2024-01-27 16:58 William Bulley
2024-01-28 19:37 William Bulley
2024-01-29 18:53 ` Deucher, Alexander
2024-01-29 19:00 William Bulley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240126184447.GC660@dell4 \
--to=web@umich.edu \
--cc=amd-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.