From: "David E. Box" <david.e.box@linux.intel.com>
To: mika.westerberg@linux.intel.com, david.e.box@linux.intel.com,
ilpo.jarvinen@linux.intel.com, bhelgaas@google.com,
rjw@rjwysocki.net
Cc: tasev.stefanoska@skynet.be, enriquezmark36@gmail.com,
kernel@witt.link, wse@tuxedocomputers.com, vidyas@nvidia.com,
kai.heng.feng@canonical.com,
sathyanarayanan.kuppuswamy@linux.intel.com, ricky_wu@realtek.com,
mario.limonciello@amd.com, linux-pci@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 1/5] PCI: Always build aspm.c
Date: Sun, 28 Jan 2024 15:32:08 -0800 [thread overview]
Message-ID: <20240128233212.1139663-2-david.e.box@linux.intel.com> (raw)
In-Reply-To: <20240128233212.1139663-1-david.e.box@linux.intel.com>
Some ASPM related tasks, such as save and restore of LTR and L1SS
capabilities, still need to be performed when CONFIG_PCIASPM=n. To prepare
for these changes, wrap the current code in aspm.c with an ifdef and always
build. Also move pci_configure_ltr() and pci_bridge_reconfigure_ltr() into
aspm.c since they only build when CONFIG_PCIEASPM is set.
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
---
drivers/pci/pci.c | 18 ---------
drivers/pci/pci.h | 5 ++-
drivers/pci/pcie/Makefile | 2 +-
drivers/pci/pcie/aspm.c | 78 +++++++++++++++++++++++++++++++++++++++
drivers/pci/probe.c | 61 ------------------------------
5 files changed, 83 insertions(+), 81 deletions(-)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index bdbf8a94b4d0..71229ec39e88 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1563,24 +1563,6 @@ static int pci_save_pcie_state(struct pci_dev *dev)
return 0;
}
-void pci_bridge_reconfigure_ltr(struct pci_dev *dev)
-{
-#ifdef CONFIG_PCIEASPM
- struct pci_dev *bridge;
- u32 ctl;
-
- bridge = pci_upstream_bridge(dev);
- if (bridge && bridge->ltr_path) {
- pcie_capability_read_dword(bridge, PCI_EXP_DEVCTL2, &ctl);
- if (!(ctl & PCI_EXP_DEVCTL2_LTR_EN)) {
- pci_dbg(bridge, "re-enabling LTR\n");
- pcie_capability_set_word(bridge, PCI_EXP_DEVCTL2,
- PCI_EXP_DEVCTL2_LTR_EN);
- }
- }
-#endif
-}
-
static void pci_restore_pcie_state(struct pci_dev *dev)
{
int i = 0;
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index f43873049d52..6771862de921 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -97,7 +97,6 @@ void pci_msi_init(struct pci_dev *dev);
void pci_msix_init(struct pci_dev *dev);
bool pci_bridge_d3_possible(struct pci_dev *dev);
void pci_bridge_d3_update(struct pci_dev *dev);
-void pci_bridge_reconfigure_ltr(struct pci_dev *dev);
int pci_bridge_wait_for_secondary_bus(struct pci_dev *dev, char *reset_type);
static inline void pci_wakeup_event(struct pci_dev *dev)
@@ -571,11 +570,15 @@ void pcie_aspm_init_link_state(struct pci_dev *pdev);
void pcie_aspm_exit_link_state(struct pci_dev *pdev);
void pcie_aspm_pm_state_change(struct pci_dev *pdev);
void pcie_aspm_powersave_config_link(struct pci_dev *pdev);
+void pci_configure_ltr(struct pci_dev *pdev);
+void pci_bridge_reconfigure_ltr(struct pci_dev *pdev);
#else
static inline void pcie_aspm_init_link_state(struct pci_dev *pdev) { }
static inline void pcie_aspm_exit_link_state(struct pci_dev *pdev) { }
static inline void pcie_aspm_pm_state_change(struct pci_dev *pdev) { }
static inline void pcie_aspm_powersave_config_link(struct pci_dev *pdev) { }
+static inline void pci_configure_ltr(struct pci_dev *pdev) { }
+static inline void pci_bridge_reconfigure_ltr(struct pci_dev *pdev) { }
#endif
#ifdef CONFIG_PCIE_ECRC
diff --git a/drivers/pci/pcie/Makefile b/drivers/pci/pcie/Makefile
index 8de4ed5f98f1..6461aa93fe76 100644
--- a/drivers/pci/pcie/Makefile
+++ b/drivers/pci/pcie/Makefile
@@ -6,7 +6,7 @@ pcieportdrv-y := portdrv.o rcec.o
obj-$(CONFIG_PCIEPORTBUS) += pcieportdrv.o
-obj-$(CONFIG_PCIEASPM) += aspm.o
+obj-y += aspm.o
obj-$(CONFIG_PCIEAER) += aer.o err.o
obj-$(CONFIG_PCIEAER_INJECT) += aer_inject.o
obj-$(CONFIG_PCIE_PME) += pme.o
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 060f4b3c8698..6d077e237a65 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -24,6 +24,8 @@
#include "../pci.h"
+#ifdef CONFIG_PCIEASPM
+
#ifdef MODULE_PARAM_PREFIX
#undef MODULE_PARAM_PREFIX
#endif
@@ -943,6 +945,81 @@ void pcie_aspm_init_link_state(struct pci_dev *pdev)
up_read(&pci_bus_sem);
}
+void pci_bridge_reconfigure_ltr(struct pci_dev *pdev)
+{
+ struct pci_dev *bridge;
+ u32 ctl;
+
+ bridge = pci_upstream_bridge(pdev);
+ if (bridge && bridge->ltr_path) {
+ pcie_capability_read_dword(bridge, PCI_EXP_DEVCTL2, &ctl);
+ if (!(ctl & PCI_EXP_DEVCTL2_LTR_EN)) {
+ pci_dbg(bridge, "re-enabling LTR\n");
+ pcie_capability_set_word(bridge, PCI_EXP_DEVCTL2,
+ PCI_EXP_DEVCTL2_LTR_EN);
+ }
+ }
+}
+
+void pci_configure_ltr(struct pci_dev *pdev)
+{
+ struct pci_host_bridge *host = pci_find_host_bridge(pdev->bus);
+ struct pci_dev *bridge;
+ u32 cap, ctl;
+
+ if (!pci_is_pcie(pdev))
+ return;
+
+ /* Read L1 PM substate capabilities */
+ pdev->l1ss = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_L1SS);
+
+ pcie_capability_read_dword(pdev, PCI_EXP_DEVCAP2, &cap);
+ if (!(cap & PCI_EXP_DEVCAP2_LTR))
+ return;
+
+ pcie_capability_read_dword(pdev, PCI_EXP_DEVCTL2, &ctl);
+ if (ctl & PCI_EXP_DEVCTL2_LTR_EN) {
+ if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT) {
+ pdev->ltr_path = 1;
+ return;
+ }
+
+ bridge = pci_upstream_bridge(pdev);
+ if (bridge && bridge->ltr_path)
+ pdev->ltr_path = 1;
+
+ return;
+ }
+
+ if (!host->native_ltr)
+ return;
+
+ /*
+ * Software must not enable LTR in an Endpoint unless the Root
+ * Complex and all intermediate Switches indicate support for LTR.
+ * PCIe r4.0, sec 6.18.
+ */
+ if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT) {
+ pcie_capability_set_word(pdev, PCI_EXP_DEVCTL2,
+ PCI_EXP_DEVCTL2_LTR_EN);
+ pdev->ltr_path = 1;
+ return;
+ }
+
+ /*
+ * If we're configuring a hot-added device, LTR was likely
+ * disabled in the upstream bridge, so re-enable it before enabling
+ * it in the new device.
+ */
+ bridge = pci_upstream_bridge(pdev);
+ if (bridge && bridge->ltr_path) {
+ pci_bridge_reconfigure_ltr(pdev);
+ pcie_capability_set_word(pdev, PCI_EXP_DEVCTL2,
+ PCI_EXP_DEVCTL2_LTR_EN);
+ pdev->ltr_path = 1;
+ }
+}
+
/* Recheck latencies and update aspm_capable for links under the root */
static void pcie_update_aspm_capable(struct pcie_link_state *root)
{
@@ -1447,3 +1524,4 @@ bool pcie_aspm_support_enabled(void)
{
return aspm_support_enabled;
}
+#endif /* CONFIG_PCIEASPM */
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index ed6b7f48736a..0b8c2c9cc9dd 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -2159,67 +2159,6 @@ static void pci_configure_relaxed_ordering(struct pci_dev *dev)
}
}
-static void pci_configure_ltr(struct pci_dev *dev)
-{
-#ifdef CONFIG_PCIEASPM
- struct pci_host_bridge *host = pci_find_host_bridge(dev->bus);
- struct pci_dev *bridge;
- u32 cap, ctl;
-
- if (!pci_is_pcie(dev))
- return;
-
- /* Read L1 PM substate capabilities */
- dev->l1ss = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_L1SS);
-
- pcie_capability_read_dword(dev, PCI_EXP_DEVCAP2, &cap);
- if (!(cap & PCI_EXP_DEVCAP2_LTR))
- return;
-
- pcie_capability_read_dword(dev, PCI_EXP_DEVCTL2, &ctl);
- if (ctl & PCI_EXP_DEVCTL2_LTR_EN) {
- if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT) {
- dev->ltr_path = 1;
- return;
- }
-
- bridge = pci_upstream_bridge(dev);
- if (bridge && bridge->ltr_path)
- dev->ltr_path = 1;
-
- return;
- }
-
- if (!host->native_ltr)
- return;
-
- /*
- * Software must not enable LTR in an Endpoint unless the Root
- * Complex and all intermediate Switches indicate support for LTR.
- * PCIe r4.0, sec 6.18.
- */
- if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT) {
- pcie_capability_set_word(dev, PCI_EXP_DEVCTL2,
- PCI_EXP_DEVCTL2_LTR_EN);
- dev->ltr_path = 1;
- return;
- }
-
- /*
- * If we're configuring a hot-added device, LTR was likely
- * disabled in the upstream bridge, so re-enable it before enabling
- * it in the new device.
- */
- bridge = pci_upstream_bridge(dev);
- if (bridge && bridge->ltr_path) {
- pci_bridge_reconfigure_ltr(dev);
- pcie_capability_set_word(dev, PCI_EXP_DEVCTL2,
- PCI_EXP_DEVCTL2_LTR_EN);
- dev->ltr_path = 1;
- }
-#endif
-}
-
static void pci_configure_eetlp_prefix(struct pci_dev *dev)
{
#ifdef CONFIG_PCI_PASID
--
2.34.1
next prev parent reply other threads:[~2024-01-28 23:32 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-28 23:32 [PATCH 0/5] Always build aspm.c David E. Box
2024-01-28 23:32 ` David E. Box [this message]
2024-01-28 23:32 ` [PATCH 2/5] PCI: Create function to save L1SS offset David E. Box
2024-01-28 23:32 ` [PATCH 3/5] PCI/ASPM: Add back L1 PM Substate save and restore David E. Box
2024-01-28 23:32 ` [PATCH 4/5] PCI: Move pci_save/restore_ltr_state() to aspm.c David E. Box
2024-01-28 23:32 ` [PATCH 5/5] PCI: Save and restore LTR state from pci_save/restore_pcie_state() David E. Box
2024-01-29 23:46 ` [PATCH 0/5] Always build aspm.c Bjorn Helgaas
2024-02-23 20:35 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240128233212.1139663-2-david.e.box@linux.intel.com \
--to=david.e.box@linux.intel.com \
--cc=bhelgaas@google.com \
--cc=enriquezmark36@gmail.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=kai.heng.feng@canonical.com \
--cc=kernel@witt.link \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mario.limonciello@amd.com \
--cc=mika.westerberg@linux.intel.com \
--cc=ricky_wu@realtek.com \
--cc=rjw@rjwysocki.net \
--cc=sathyanarayanan.kuppuswamy@linux.intel.com \
--cc=tasev.stefanoska@skynet.be \
--cc=vidyas@nvidia.com \
--cc=wse@tuxedocomputers.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.