Re: [PATCH v6 6/6] PCI: qcom: Add OPP support to scale performance state of power domain

[Manivannan Sadhasivam <mani@kernel.org>]

On Fri, Jan 12, 2024 at 07:52:05PM +0530, Krishna chaitanya chundru wrote:
> QCOM Resource Power Manager-hardened (RPMh) is a hardware block which
> maintains hardware state of a regulator by performing max aggregation of
> the requests made by all of the processors.
> 

s/processors/clients

> PCIe controller can operate on different RPMh performance state of power
> domain based up on the speed of the link. And this performance state varies
> from target to target.
> 
> It is manadate to scale the performance state based up on the PCIe speed
> link operates so that SoC can run under optimum power conditions.
> 
> Add Operating Performance Points(OPP) support to vote for RPMh state based
> upon GEN speed link is operating.
> 
> OPP can handle ICC bw voting also, so move icc bw voting through opp
> framework if opp entries are present.
> 
> In PCIe certain gen speeds like GEN1x2 & GEN2X1 or GEN3x2 & GEN4x1 use
> same icc bw and has frequency, so use frequency based search to reduce
> number of entries in the opp table.
> 
> Don't initialize icc if opp is supported.
> 
> Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 83 ++++++++++++++++++++++++++++------
>  1 file changed, 70 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 035953f0b6d8..31512dc9d6ff 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -22,6 +22,7 @@
>  #include <linux/of.h>
>  #include <linux/of_gpio.h>
>  #include <linux/pci.h>
> +#include <linux/pm_opp.h>
>  #include <linux/pm_runtime.h>
>  #include <linux/platform_device.h>
>  #include <linux/phy/pcie.h>
> @@ -244,6 +245,7 @@ struct qcom_pcie {
>  	const struct qcom_pcie_cfg *cfg;
>  	struct dentry *debugfs;
>  	bool suspended;
> +	bool opp_supported;
>  };
>  
>  #define to_qcom_pcie(x)		dev_get_drvdata((x)->dev)
> @@ -1404,16 +1406,14 @@ static int qcom_pcie_icc_init(struct qcom_pcie *pcie)
>  	return 0;
>  }
>  
> -static void qcom_pcie_icc_update(struct qcom_pcie *pcie)
> +static void qcom_pcie_icc_opp_update(struct qcom_pcie *pcie)
>  {
>  	struct dw_pcie *pci = pcie->pci;
> -	u32 offset, status;
> +	u32 offset, status, freq;
> +	struct dev_pm_opp *opp;
>  	int speed, width;
>  	int ret;
>  
> -	if (!pcie->icc_mem)
> -		return;
> -
>  	offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
>  	status = readw(pci->dbi_base + offset + PCI_EXP_LNKSTA);
>  
> @@ -1424,11 +1424,42 @@ static void qcom_pcie_icc_update(struct qcom_pcie *pcie)
>  	speed = FIELD_GET(PCI_EXP_LNKSTA_CLS, status);
>  	width = FIELD_GET(PCI_EXP_LNKSTA_NLW, status);
>  
> -	ret = icc_set_bw(pcie->icc_mem, 0, width * QCOM_PCIE_LINK_SPEED_TO_BW(speed));
> -	if (ret) {
> -		dev_err(pci->dev, "failed to set interconnect bandwidth: %d\n",
> -			ret);
> +	if (pcie->opp_supported) {
> +		switch (speed) {
> +		case 1:
> +			freq = 2500000;
> +			break;
> +		case 2:
> +			freq = 5000000;
> +			break;
> +		case 3:
> +			freq = 8000000;
> +			break;
> +		default:
> +			WARN_ON_ONCE(1);
> +			fallthrough;
> +		case 4:
> +			freq = 16000000;
> +			break;
> +		}

This switch case is PCIe generic, so need to be moved to drivers/pci/pci.c.
There is already an API, pcie_link_speed_mbps() that returns the frequency in
MBps but uses the pcie_capability_read_word() API to read LNKSTA of the device.

But you can move the switch case inside that API to a separate function and
reuse that here.

> +
> +		opp = dev_pm_opp_find_freq_exact(pci->dev, freq * width, true);
> +		if (!IS_ERR(opp)) {
> +			ret = dev_pm_opp_set_opp(pci->dev, opp);
> +			if (ret)
> +				dev_err(pci->dev, "Failed to set opp: freq %ld ret %d\n",
> +					dev_pm_opp_get_freq(opp), ret);
> +			dev_pm_opp_put(opp);
> +		}
> +	} else {
> +		ret = icc_set_bw(pcie->icc_mem, 0, width * QCOM_PCIE_LINK_SPEED_TO_BW(speed));
> +		if (ret) {
> +			dev_err(pci->dev, "failed to set interconnect bandwidth for pcie-mem: %d\n",
> +				ret);
> +		}
>  	}
> +
> +	return;
>  }
>  
>  static int qcom_pcie_link_transition_count(struct seq_file *s, void *data)
> @@ -1471,8 +1502,10 @@ static void qcom_pcie_init_debugfs(struct qcom_pcie *pcie)
>  static int qcom_pcie_probe(struct platform_device *pdev)
>  {
>  	const struct qcom_pcie_cfg *pcie_cfg;
> +	unsigned long max_freq = INT_MAX;
>  	struct device *dev = &pdev->dev;
>  	struct qcom_pcie *pcie;
> +	struct dev_pm_opp *opp;
>  	struct dw_pcie_rp *pp;
>  	struct resource *res;
>  	struct dw_pcie *pci;
> @@ -1539,9 +1572,33 @@ static int qcom_pcie_probe(struct platform_device *pdev)
>  		goto err_pm_runtime_put;
>  	}
>  
> -	ret = qcom_pcie_icc_init(pcie);
> -	if (ret)
> +	 /* OPP table is optional */
> +	ret = devm_pm_opp_of_add_table(dev);
> +	if (ret && ret != -ENODEV) {
> +		dev_err_probe(dev, ret, "Failed to add OPP table\n");
>  		goto err_pm_runtime_put;
> +	}
> +
> +	/* vote for max freq in the opp table if opp table is present */

/*
 * Use highest OPP here if the OPP table is present. At the end of the probe(),
 * OPP will be updated using qcom_pcie_icc_opp_update().
 */

- Mani

-- 
மணிவண்ணன் சதாசிவம்