From: kernel test robot <lkp@intel.com>
To: Baoquan He <bhe@redhat.com>
Cc: oe-kbuild-all@lists.linux.dev,
David Hildenbrand <david@redhat.com>,
Andrew Morton <akpm@linux-foundation.org>,
Linux Memory Management List <linux-mm@kvack.org>
Subject: [davidhildenbrand:fork_rmap_batching_mm_unstable 104/141] make[4]: *** No rule to make target 'kernel/elfcorehdr.o', needed by 'kernel/built-in.a'.
Date: Mon, 29 Jan 2024 20:12:47 +0800 [thread overview]
Message-ID: <202401292018.RTtZWk0P-lkp@intel.com> (raw)
Hi Baoquan,
First bad commit (maybe != root cause):
tree: https://github.com/davidhildenbrand/linux fork_rmap_batching_mm_unstable
head: b652ec55c236cca5d0247cf66864971cc2ffea2d
commit: 21b8f7d4d9d70fec7ff6bbd973e485fa1226b156 [104/141] crash: remove dependency of FA_DUMP on CRASH_DUMP
compiler: gcc-12 (Debian 12.2.0-14) 12.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240129/202401292018.RTtZWk0P-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202401292018.RTtZWk0P-lkp@intel.com/
All errors (new ones prefixed by >>):
kernel/irq/irqdomain.c:1052: warning: Function parameter or struct member 'out_type' not described in 'irq_domain_translate_onecell'
kernel/irq/irqdomain.c:1073: warning: Function parameter or struct member 'd' not described in 'irq_domain_translate_twocell'
kernel/irq/irqdomain.c:1073: warning: Function parameter or struct member 'fwspec' not described in 'irq_domain_translate_twocell'
kernel/irq/irqdomain.c:1073: warning: Function parameter or struct member 'out_hwirq' not described in 'irq_domain_translate_twocell'
kernel/irq/irqdomain.c:1073: warning: Function parameter or struct member 'out_type' not described in 'irq_domain_translate_twocell'
net/8021q/vlan.c: In function 'register_vlan_device':
net/8021q/vlan.c:247:46: warning: '%i' directive output may be truncated writing between 1 and 4 bytes into a region of size between 0 and 15 [-Wformat-truncation=]
247 | snprintf(name, IFNAMSIZ, "%s.%i", real_dev->name, vlan_id);
| ^~
net/8021q/vlan.c:247:42: note: directive argument in the range [0, 4094]
247 | snprintf(name, IFNAMSIZ, "%s.%i", real_dev->name, vlan_id);
| ^~~~~~~
net/8021q/vlan.c:247:17: note: 'snprintf' output between 3 and 21 bytes into a destination of size 16
247 | snprintf(name, IFNAMSIZ, "%s.%i", real_dev->name, vlan_id);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
net/8021q/vlan.c:235:46: warning: '%.4i' directive output may be truncated writing 4 bytes into a region of size between 0 and 15 [-Wformat-truncation=]
235 | snprintf(name, IFNAMSIZ, "%s.%.4i", real_dev->name, vlan_id);
| ^~~~
net/8021q/vlan.c:235:42: note: directive argument in the range [0, 4094]
235 | snprintf(name, IFNAMSIZ, "%s.%.4i", real_dev->name, vlan_id);
| ^~~~~~~~~
net/8021q/vlan.c:235:17: note: 'snprintf' output between 6 and 21 bytes into a destination of size 16
235 | snprintf(name, IFNAMSIZ, "%s.%.4i", real_dev->name, vlan_id);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
net/9p/trans_fd.c:133: warning: Excess struct member 'req' description in 'p9_conn'
arch/x86/kernel/apic/apic.c:2170: warning: Function parameter or struct member 'spurious_interrupt' not described in 'DEFINE_IDTENTRY_IRQ'
arch/x86/kernel/apic/apic.c:2170: warning: expecting prototype for spurious_interrupt(). Prototype was for DEFINE_IDTENTRY_IRQ() instead
kernel/time/hrtimer.c:120:35: warning: initialized field overwritten [-Woverride-init]
120 | [CLOCK_REALTIME] = HRTIMER_BASE_REALTIME,
| ^~~~~~~~~~~~~~~~~~~~~
kernel/time/hrtimer.c:120:35: note: (near initialization for 'hrtimer_clock_to_base_table[0]')
kernel/time/hrtimer.c:121:35: warning: initialized field overwritten [-Woverride-init]
121 | [CLOCK_MONOTONIC] = HRTIMER_BASE_MONOTONIC,
| ^~~~~~~~~~~~~~~~~~~~~~
kernel/time/hrtimer.c:121:35: note: (near initialization for 'hrtimer_clock_to_base_table[1]')
kernel/time/hrtimer.c:122:35: warning: initialized field overwritten [-Woverride-init]
122 | [CLOCK_BOOTTIME] = HRTIMER_BASE_BOOTTIME,
| ^~~~~~~~~~~~~~~~~~~~~
kernel/time/hrtimer.c:122:35: note: (near initialization for 'hrtimer_clock_to_base_table[7]')
kernel/time/hrtimer.c:123:35: warning: initialized field overwritten [-Woverride-init]
123 | [CLOCK_TAI] = HRTIMER_BASE_TAI,
| ^~~~~~~~~~~~~~~~
kernel/time/hrtimer.c:123:35: note: (near initialization for 'hrtimer_clock_to_base_table[11]')
kernel/time/hrtimer.c: In function '__run_hrtimer':
kernel/time/hrtimer.c:1651:14: warning: variable 'expires_in_hardirq' set but not used [-Wunused-but-set-variable]
1651 | bool expires_in_hardirq;
| ^~~~~~~~~~~~~~~~~~
kernel/time/timekeeping.c:2423: warning: Function parameter or struct member 'txc' not described in 'do_adjtimex'
kernel/time/timekeeping.c:2491: warning: Function parameter or struct member 'phase_ts' not described in 'hardpps'
kernel/time/timekeeping.c:2491: warning: Function parameter or struct member 'raw_ts' not described in 'hardpps'
drivers/dma-buf/dma-heap.c:44: warning: Function parameter or struct member 'priv' not described in 'dma_heap'
drivers/dma-buf/dma-heap.c:44: warning: Function parameter or struct member 'heap_devt' not described in 'dma_heap'
drivers/dma-buf/dma-heap.c:44: warning: Function parameter or struct member 'list' not described in 'dma_heap'
drivers/dma-buf/dma-heap.c:44: warning: Function parameter or struct member 'heap_cdev' not described in 'dma_heap'
drivers/base/power/runtime.c:363: warning: Excess function parameter 'dev' description in '__rpm_callback'
fs/proc/proc_net.c:161: warning: Function parameter or struct member 'state_size' not described in 'proc_create_net_data_write'
In file included from include/asm-generic/bug.h:22,
from arch/x86/include/asm/bug.h:87,
from include/linux/bug.h:5,
from include/linux/thread_info.h:13,
from include/linux/spinlock.h:60,
from include/linux/wait.h:9,
from include/linux/wait_bit.h:8,
from include/linux/fs.h:6,
from include/linux/highmem.h:5,
from include/linux/bvec.h:10,
from include/linux/blk_types.h:10,
from include/linux/blkdev.h:9,
from drivers/scsi/scsi_devinfo.c:3:
drivers/scsi/scsi_devinfo.c: In function 'scsi_dev_info_list_add_str':
include/linux/kern_levels.h:5:25: warning: '%s' directive argument is null [-Wformat-overflow=]
5 | #define KERN_SOH "\001" /* ASCII Start Of Header */
| ^~~~~~
include/linux/printk.h:427:25: note: in definition of macro 'printk_index_wrap'
427 | _p_func(_fmt, ##__VA_ARGS__); \
| ^~~~
drivers/scsi/scsi_devinfo.c:554:25: note: in expansion of macro 'printk'
554 | printk(KERN_ERR "%s: bad dev info string '%s' '%s'"
| ^~~~~~
include/linux/kern_levels.h:11:25: note: in expansion of macro 'KERN_SOH'
11 | #define KERN_ERR KERN_SOH "3" /* error conditions */
| ^~~~~~~~
drivers/scsi/scsi_devinfo.c:554:32: note: in expansion of macro 'KERN_ERR'
554 | printk(KERN_ERR "%s: bad dev info string '%s' '%s'"
| ^~~~~~~~
kernel/time/tick-oneshot.c:24: warning: Function parameter or struct member 'expires' not described in 'tick_program_event'
kernel/time/tick-oneshot.c:24: warning: Function parameter or struct member 'force' not described in 'tick_program_event'
kernel/time/tick-oneshot.c:64: warning: Function parameter or struct member 'newdev' not described in 'tick_setup_oneshot'
kernel/time/tick-oneshot.c:64: warning: Function parameter or struct member 'handler' not described in 'tick_setup_oneshot'
kernel/time/tick-oneshot.c:64: warning: Function parameter or struct member 'next_event' not described in 'tick_setup_oneshot'
kernel/time/tick-oneshot.c:74: warning: Function parameter or struct member 'handler' not described in 'tick_switch_to_oneshot'
kernel/time/tick-broadcast.c:1026: warning: Function parameter or struct member 'bc' not described in 'tick_broadcast_setup_oneshot'
kernel/time/tick-broadcast.c:1026: warning: Function parameter or struct member 'from_periodic' not described in 'tick_broadcast_setup_oneshot'
drivers/firewire/init_ohci1394_dma.c:178: warning: Function parameter or struct member 'ohci' not described in 'init_ohci1394_wait_for_busresets'
drivers/firewire/init_ohci1394_dma.c:196: warning: Function parameter or struct member 'ohci' not described in 'init_ohci1394_enable_physical_dma'
drivers/firewire/init_ohci1394_dma.c:207: warning: Function parameter or struct member 'ohci' not described in 'init_ohci1394_reset_and_init_dma'
drivers/firewire/init_ohci1394_dma.c:236: warning: Function parameter or struct member 'num' not described in 'init_ohci1394_controller'
drivers/firewire/init_ohci1394_dma.c:236: warning: Function parameter or struct member 'slot' not described in 'init_ohci1394_controller'
drivers/firewire/init_ohci1394_dma.c:236: warning: Function parameter or struct member 'func' not described in 'init_ohci1394_controller'
drivers/firewire/init_ohci1394_dma.c:289: warning: Function parameter or struct member 'opt' not described in 'setup_ohci1394_dma'
>> make[4]: *** No rule to make target 'kernel/elfcorehdr.o', needed by 'kernel/built-in.a'.
kernel/time/tick-sched.c:650: warning: Function parameter or struct member 'now' not described in 'tick_nohz_update_jiffies'
kernel/time/tick-sched.c:1285: warning: Function parameter or struct member 'cpu' not described in 'tick_nohz_get_idle_calls_cpu'
drivers/base/module.c: In function 'module_add_driver':
drivers/base/module.c:36:13: warning: variable 'no_warn' set but not used [-Wunused-but-set-variable]
36 | int no_warn;
| ^~~~~~~
arch/x86/kernel/cpu/sgx/main.c:740: warning: Function parameter or struct member 'low' not described in 'sgx_calc_section_metric'
arch/x86/kernel/cpu/sgx/main.c:740: warning: Function parameter or struct member 'high' not described in 'sgx_calc_section_metric'
arch/x86/kernel/cpu/sgx/main.c:740: warning: expecting prototype for A section metric is concatenated in a way that @low bits 12(). Prototype was for sgx_calc_section_metric() instead
In file included from drivers/net/usb/asix.h:28,
from drivers/net/usb/ax88172a.c:15:
drivers/net/usb/ax88172a.c: In function 'ax88172a_reset':
include/linux/phy.h:300:20: warning: '%s' directive output may be truncated writing up to 60 bytes into a region of size 20 [-Wformat-truncation=]
300 | #define PHY_ID_FMT "%s:%02x"
| ^~~~~~~~~
drivers/net/usb/ax88172a.c:311:38: note: in expansion of macro 'PHY_ID_FMT'
311 | snprintf(priv->phy_name, 20, PHY_ID_FMT,
| ^~~~~~~~~~
include/linux/phy.h:300:21: note: format string is defined here
300 | #define PHY_ID_FMT "%s:%02x"
| ^~
include/linux/phy.h:300:20: note: directive argument in the range [0, 65535]
300 | #define PHY_ID_FMT "%s:%02x"
| ^~~~~~~~~
drivers/net/usb/ax88172a.c:311:38: note: in expansion of macro 'PHY_ID_FMT'
311 | snprintf(priv->phy_name, 20, PHY_ID_FMT,
| ^~~~~~~~~~
drivers/net/usb/ax88172a.c:311:9: note: 'snprintf' output between 4 and 66 bytes into a destination of size 20
311 | snprintf(priv->phy_name, 20, PHY_ID_FMT,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
312 | priv->mdio->id, priv->phy_addr);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/usb/core/usb.c: In function 'usb_alloc_dev':
drivers/usb/core/usb.c:706:37: warning: '%d' directive output may be truncated writing between 1 and 11 bytes into a region of size between 0 and 15 [-Wformat-truncation=]
706 | "%s.%d", parent->devpath, port1);
| ^~
drivers/usb/core/usb.c:706:33: note: using the range [-2147483648, 2147483647] for directive argument
706 | "%s.%d", parent->devpath, port1);
| ^~~~~~~
drivers/usb/core/usb.c:705:25: note: 'snprintf' output between 3 and 28 bytes into a destination of size 16
705 | snprintf(dev->devpath, sizeof dev->devpath,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
706 | "%s.%d", parent->devpath, port1);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/usb/core/hcd.c: In function 'rh_string':
drivers/usb/core/hcd.c:443:48: warning: '%s' directive output may be truncated writing up to 64 bytes into a region of size between 35 and 99 [-Wformat-truncation=]
443 | snprintf (buf, sizeof buf, "%s %s %s", init_utsname()->sysname,
| ^~
444 | init_utsname()->release, hcd->driver->description);
| ~~~~~~~~~~~~~~~~~~~~~~~
drivers/usb/core/hcd.c:443:17: note: 'snprintf' output 3 or more bytes (assuming 131) into a destination of size 100
443 | snprintf (buf, sizeof buf, "%s %s %s", init_utsname()->sysname,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
444 | init_utsname()->release, hcd->driver->description);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
kernel/audit.c: In function 'audit_log_vformat':
kernel/audit.c:1979:9: warning: function 'audit_log_vformat' might be a candidate for 'gnu_printf' format attribute [-Wsuggest-attribute=format]
1979 | len = vsnprintf(skb_tail_pointer(skb), avail, fmt, args);
| ^~~
kernel/audit.c:1988:17: warning: function 'audit_log_vformat' might be a candidate for 'gnu_printf' format attribute [-Wsuggest-attribute=format]
1988 | len = vsnprintf(skb_tail_pointer(skb), avail, fmt, args2);
| ^~~
drivers/input/keyboard/atkbd.c: In function 'atkbd_set_device_attrs':
drivers/input/keyboard/atkbd.c:1193:21: warning: '/input0' directive output may be truncated writing 7 bytes into a region of size between 1 and 32 [-Wformat-truncation=]
1193 | "%s/input0", atkbd->ps2dev.serio->phys);
| ^~~~~~~
drivers/input/keyboard/atkbd.c:1192:9: note: 'snprintf' output between 8 and 39 bytes into a destination of size 32
1192 | snprintf(atkbd->phys, sizeof(atkbd->phys),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1193 | "%s/input0", atkbd->ps2dev.serio->phys);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/input/mouse/psmouse-base.c: In function 'psmouse_connect':
drivers/input/mouse/psmouse-base.c:1603:59: warning: '/input0' directive output may be truncated writing 7 bytes into a region of size between 1 and 32 [-Wformat-truncation=]
1603 | snprintf(psmouse->phys, sizeof(psmouse->phys), "%s/input0", serio->phys);
| ^~~~~~~
drivers/input/mouse/psmouse-base.c:1603:9: note: 'snprintf' output between 8 and 39 bytes into a destination of size 32
1603 | snprintf(psmouse->phys, sizeof(psmouse->phys), "%s/input0", serio->phys);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/input/mouse/alps.c: In function 'alps_register_bare_ps2_mouse':
drivers/input/mouse/alps.c:1419:56: warning: '%s' directive output may be truncated writing 6 bytes into a region of size between 0 and 31 [-Wformat-truncation=]
1419 | snprintf(priv->phys3, sizeof(priv->phys3), "%s/%s",
| ^~
drivers/input/mouse/alps.c:1419:9: note: 'snprintf' output between 8 and 39 bytes into a destination of size 32
1419 | snprintf(priv->phys3, sizeof(priv->phys3), "%s/%s",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1420 | psmouse->ps2dev.serio->phys,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1421 | (priv->dev2 ? "input2" : "input1"));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
kernel/kprobes.c:145: warning: Function parameter or struct member 'c' not described in '__get_insn_slot'
drivers/input/mouse/elantech.c: In function 'elantech_setup_ps2':
drivers/input/mouse/elantech.c:2090:65: warning: '/input1' directive output may be truncated writing 7 bytes into a region of size between 1 and 32 [-Wformat-truncation=]
2090 | snprintf(etd->tp_phys, sizeof(etd->tp_phys), "%s/input1",
| ^~~~~~~
drivers/input/mouse/elantech.c:2090:17: note: 'snprintf' output between 8 and 39 bytes into a destination of size 32
2090 | snprintf(etd->tp_phys, sizeof(etd->tp_phys), "%s/input1",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2091 | psmouse->ps2dev.serio->phys);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
kernel/relay.c: In function 'relay_create_buf_file':
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
next reply other threads:[~2024-01-29 12:13 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-29 12:12 kernel test robot [this message]
2024-01-29 13:48 ` [davidhildenbrand:fork_rmap_batching_mm_unstable 104/141] make[4]: *** No rule to make target 'kernel/elfcorehdr.o', needed by 'kernel/built-in.a' Baoquan He
2024-01-29 13:52 ` David Hildenbrand
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202401292018.RTtZWk0P-lkp@intel.com \
--to=lkp@intel.com \
--cc=akpm@linux-foundation.org \
--cc=bhe@redhat.com \
--cc=david@redhat.com \
--cc=linux-mm@kvack.org \
--cc=oe-kbuild-all@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.