All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
To: Alison Schofield <alison.schofield@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>,
	Dan Williams <dan.j.williams@intel.com>,
	Davidlohr Bueso <dave@stgolabs.net>,
	Dave Jiang <dave.jiang@intel.com>,
	Vishal Verma <vishal.l.verma@intel.com>,
	<linux-acpi@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-efi@vger.kernel.org>, <linux-cxl@vger.kernel.org>
Subject: Re: [PATCH 1/2] cxl/cper: Fix errant CPER prints for CXL events
Date: Thu, 1 Feb 2024 11:22:14 +0000	[thread overview]
Message-ID: <20240201112214.00005fea@Huawei.com> (raw)
In-Reply-To: <ZbrxDMwn4h3y5waj@aschofie-mobl2>

On Wed, 31 Jan 2024 17:17:00 -0800
Alison Schofield <alison.schofield@intel.com> wrote:

> On Wed, Jan 31, 2024 at 03:55:38PM -0800, Ira Weiny wrote:
> > Jonathan reports that CXL CPER events dump an extra generic error
> > message.
> > 
> > 	{1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1
> > 	{1}[Hardware Error]: event severity: recoverable
> > 	{1}[Hardware Error]:  Error 0, type: recoverable
> > 	{1}[Hardware Error]:   section type: unknown, fbcd0a77-c260-417f-85a9-088b1621eba6
> > 	{1}[Hardware Error]:   section length: 0x90
> > 	{1}[Hardware Error]:   00000000: 00000090 00000007 00000000 0d938086 ................
> > 	{1}[Hardware Error]:   00000010: 00100000 00000000 00040000 00000000 ................
> > 	...
> > 
> > CXL events were rerouted though the CXL subsystem for additional
> > processing.  However, when that work was done it was missed that
> > cper_estatus_print_section() continued with a generic error message
> > which is confusing.
> > 
> > Teach CPER print code to ignore printing details of some section types.
> > Assign the CXL event GUIDs to this set to prevent confusing unknown
> > prints.  
> 
> Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

> 
> 
> > 
> > Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> > Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> > Signed-off-by: Ira Weiny <ira.weiny@intel.com>
> > ---
> >  drivers/acpi/apei/ghes.c    | 26 --------------------------
> >  drivers/firmware/efi/cper.c | 19 +++++++++++++++++++
> >  include/linux/cper.h        | 23 +++++++++++++++++++++++
> >  3 files changed, 42 insertions(+), 26 deletions(-)
> > 
> > diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
> > index 7b7c605166e0..fe825a432c5b 100644
> > --- a/drivers/acpi/apei/ghes.c
> > +++ b/drivers/acpi/apei/ghes.c
> > @@ -680,32 +680,6 @@ static void ghes_defer_non_standard_event(struct acpi_hest_generic_data *gdata,
> >  static DECLARE_RWSEM(cxl_cper_rw_sem);
> >  static cxl_cper_callback cper_callback;
> >  
> > -/* CXL Event record UUIDs are formatted as GUIDs and reported in section type */
> > -
> > -/*
> > - * General Media Event Record
> > - * CXL rev 3.0 Section 8.2.9.2.1.1; Table 8-43
> > - */
> > -#define CPER_SEC_CXL_GEN_MEDIA_GUID					\
> > -	GUID_INIT(0xfbcd0a77, 0xc260, 0x417f,				\
> > -		  0x85, 0xa9, 0x08, 0x8b, 0x16, 0x21, 0xeb, 0xa6)
> > -
> > -/*
> > - * DRAM Event Record
> > - * CXL rev 3.0 section 8.2.9.2.1.2; Table 8-44
> > - */
> > -#define CPER_SEC_CXL_DRAM_GUID						\
> > -	GUID_INIT(0x601dcbb3, 0x9c06, 0x4eab,				\
> > -		  0xb8, 0xaf, 0x4e, 0x9b, 0xfb, 0x5c, 0x96, 0x24)
> > -
> > -/*
> > - * Memory Module Event Record
> > - * CXL rev 3.0 section 8.2.9.2.1.3; Table 8-45
> > - */
> > -#define CPER_SEC_CXL_MEM_MODULE_GUID					\
> > -	GUID_INIT(0xfe927475, 0xdd59, 0x4339,				\
> > -		  0xa5, 0x86, 0x79, 0xba, 0xb1, 0x13, 0xb7, 0x74)
> > -
> >  static void cxl_cper_post_event(enum cxl_event_type event_type,
> >  				struct cxl_cper_event_rec *rec)
> >  {
> > diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c
> > index 35c37f667781..9b3884ff81e6 100644
> > --- a/drivers/firmware/efi/cper.c
> > +++ b/drivers/firmware/efi/cper.c
> > @@ -523,6 +523,17 @@ static void cper_print_tstamp(const char *pfx,
> >  	}
> >  }
> >  
> > +struct ignore_section {
> > +	guid_t guid;
> > +	const char *name;
> > +};
> > +
> > +static const struct ignore_section ignore_sections[] = {
> > +	{ .guid = CPER_SEC_CXL_GEN_MEDIA_GUID, .name = "CXL General Media Event" },
> > +	{ .guid = CPER_SEC_CXL_DRAM_GUID, .name = "CXL DRAM Event" },
> > +	{ .guid = CPER_SEC_CXL_MEM_MODULE_GUID, .name = "CXL Memory Module Event" },
> > +};
> > +
> >  static void
> >  cper_estatus_print_section(const char *pfx, struct acpi_hest_generic_data *gdata,
> >  			   int sec_no)
> > @@ -543,6 +554,14 @@ cper_estatus_print_section(const char *pfx, struct acpi_hest_generic_data *gdata
> >  		printk("%s""fru_text: %.20s\n", pfx, gdata->fru_text);
> >  
> >  	snprintf(newpfx, sizeof(newpfx), "%s ", pfx);
> > +
> > +	for (int i = 0; i < ARRAY_SIZE(ignore_sections); i++) {
> > +		if (guid_equal(sec_type, &ignore_sections[i].guid)) {
> > +			printk("%ssection_type: %s\n", newpfx, ignore_sections[i].name);
> > +			return;
> > +		}
> > +	}
> > +
> >  	if (guid_equal(sec_type, &CPER_SEC_PROC_GENERIC)) {
> >  		struct cper_sec_proc_generic *proc_err = acpi_hest_get_payload(gdata);
> >  
> > diff --git a/include/linux/cper.h b/include/linux/cper.h
> > index c1a7dc325121..265b0f8fc0b3 100644
> > --- a/include/linux/cper.h
> > +++ b/include/linux/cper.h
> > @@ -90,6 +90,29 @@ enum {
> >  	GUID_INIT(0x667DD791, 0xC6B3, 0x4c27, 0x8A, 0x6B, 0x0F, 0x8E,	\
> >  		  0x72, 0x2D, 0xEB, 0x41)
> >  
> > +/* CXL Event record UUIDs are formatted as GUIDs and reported in section type */
> > +/*
> > + * General Media Event Record
> > + * CXL rev 3.0 Section 8.2.9.2.1.1; Table 8-43
> > + */
> > +#define CPER_SEC_CXL_GEN_MEDIA_GUID					\
> > +	GUID_INIT(0xfbcd0a77, 0xc260, 0x417f,				\
> > +		  0x85, 0xa9, 0x08, 0x8b, 0x16, 0x21, 0xeb, 0xa6)
> > +/*
> > + * DRAM Event Record
> > + * CXL rev 3.0 section 8.2.9.2.1.2; Table 8-44
> > + */
> > +#define CPER_SEC_CXL_DRAM_GUID						\
> > +	GUID_INIT(0x601dcbb3, 0x9c06, 0x4eab,				\
> > +		  0xb8, 0xaf, 0x4e, 0x9b, 0xfb, 0x5c, 0x96, 0x24)
> > +/*
> > + * Memory Module Event Record
> > + * CXL rev 3.0 section 8.2.9.2.1.3; Table 8-45
> > + */
> > +#define CPER_SEC_CXL_MEM_MODULE_GUID					\
> > +	GUID_INIT(0xfe927475, 0xdd59, 0x4339,				\
> > +		  0xa5, 0x86, 0x79, 0xba, 0xb1, 0x13, 0xb7, 0x74)
> > +
> >  /*
> >   * Flags bits definitions for flags in struct cper_record_header
> >   * If set, the error has been recovered
> > 
> > -- 
> > 2.43.0
> >   
> 


  reply	other threads:[~2024-02-01 11:22 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-31 23:55 [PATCH 0/2] cxl/cper: Fixes for CXL CPER event processing Ira Weiny
2024-01-31 23:55 ` [PATCH 1/2] cxl/cper: Fix errant CPER prints for CXL events Ira Weiny
2024-02-01  1:17   ` Alison Schofield
2024-02-01 11:22     ` Jonathan Cameron [this message]
2024-02-01 16:15   ` Dave Jiang
2024-01-31 23:55 ` [PATCH 2/2] cxl/trace: Remove unnecessary memcpy's Ira Weiny
2024-02-01  1:17   ` Alison Schofield
2024-02-01 11:23     ` Jonathan Cameron
2024-02-01 16:16   ` Dave Jiang
2024-02-03 17:31 ` [PATCH 0/2] cxl/cper: Fixes for CXL CPER event processing Ard Biesheuvel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240201112214.00005fea@Huawei.com \
    --to=jonathan.cameron@huawei.com \
    --cc=alison.schofield@intel.com \
    --cc=dan.j.williams@intel.com \
    --cc=dave.jiang@intel.com \
    --cc=dave@stgolabs.net \
    --cc=ira.weiny@intel.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linux-efi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=vishal.l.verma@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.